[SR-Users] sipML5 through kamailio

[SamyGo]

Hi Steve,
Can you confirm that port 10443 is reachable behind the NAT to Kamailio
server, validate iptables too Does your SIPml5 demo client register
successfully to Kamailio? are there enough xlog lines to print out if
anything lands in Kamailio.

Regards,
Sammy



On Thu, Nov 23, 2017 at 11:34 AM, Wilkins, Steve <swwilkins at mitre.org>
wrote:

> Hello,
>
>
>
> I am attempting to use sipML5 to test WebRTC.  I have not been successful
> in getting messages through to Kamailio though. I am running Kamailio 5.0.3
> on Cento 7.
>
>
>
> *My listen’s in the kamailio configuration file are => *
>
> listen=tcp:112.22.3.108:5060 advertise 34.226.187.61:5060
>
> listen=udp:112.22.3.108:5060 advertise 34.226.187.61:5060
>
> listen=tcp:112.22.3.108:10443 (which I will use in the sipML5 Expert mode)
>
>
>
> *My sipML5 settings are => *
>
> Public Identity - sip:user1 at 112.22.3.108
>
> Realm - *112.22.3.108*
>
>
>
> *Export mode setting are => *
>
> WebSocket Server URL - *wss://112.22.3.108:10443
> <http://112.22.3.108:10443> *(I have also tried *wss://112.22.3.108:10443/ws
> <http://112.22.3.108:10443/ws>)*
>
> SIP outbound Proxy URL - *udp://112.22.3.108:5060
> <http://112.22.3.108:5060> *(I have also left this blank)
>
>
>
> When I make a call I see no Kamailio activity (I have logging at the start
> of request_route) so I am not sure where the configuration error is.  If I
> change the sipML5 configuration IP Address to use the asterisk IP Address,
> sipML5 works.  My goal is to go WebRTC Client => Kamailio => Asterisk and
> eventually through some sort of media proxy.
>
>
>
> Thank you,
>
> -Steve
>
>
>
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20171123/55db2e9d/attachment.html>