[SR-Users] Issue with Dispatcher Failover algorithm

Cristi Constantin cristi.constantin at gmail.com
Tue May 30 13:18:57 CEST 2017


That's great. Thanks a lot.

Best regards,
Cristian

On 5/30/17, Daniel-Constantin Mierla <miconda at gmail.com> wrote:
> Hello,
>
> I was traveling during the past two weeks and didn't have the time to
> look properly at it. Hopefully today or tomorrow I will get to it.
>
> Cheers,
> Daniel
>
>
> On 29.05.17 23:14, Cristi Constantin wrote:
>> Hi Daniel,
>>
>> Did you got the chance to look at the trace attached?
>> I still not managed to figure out why failover is not working in my
>> Kamailio configuration..
>>
>> Thank you,
>> Cristian
>>
>> On Thu, May 25, 2017 at 5:17 PM, Cristi Constantin
>> <cristi.constantin at gmail.com <mailto:cristi.constantin at gmail.com>> wrote:
>>
>>     Hi Daniel,
>>
>>     I attached a pcap trace. It contains several SIP messages, but
>>     please check the INVITEs from 10.224.74.36 (Kamailio) to
>>     10.126.54.51/10.126.55.51 <http://10.126.54.51/10.126.55.51>.
>>
>>     Thanks for you support,
>>     Cristian
>>
>>     On Thu, May 25, 2017 at 5:04 PM, Daniel-Constantin Mierla
>>     <miconda at gmail.com <mailto:miconda at gmail.com>> wrote:
>>
>>         Hello,
>>
>>         can you sent pcap or ngrep output with all sip messages of
>>         such case exposing the issue you have?
>>
>>         Cheers,
>>         Daniel
>>
>>         On Thu, May 25, 2017 at 2:18 PM, Cristi Constantin
>>         <cristi.constantin at gmail.com
>>         <mailto:cristi.constantin at gmail.com>> wrote:
>>
>>             Hello,
>>
>>             I have an issue with the behavior of ds_select_dst()
>>             method in case of using algorithm 8 (dispatch based on
>>             priority). In case both destinations are available, they
>>             are used alternatively, instead of always using the one
>>             with the highest priority.
>>
>>             By searching through the mailing list I found that the
>>             lower the priority number, the higher the priority (1 is
>>             first, 2 is second, etc.).
>>             Based on this, I set the following in dispatcher.list:
>>             7 sip:10.126.54.51:5060
>>             <http://10.126.54.51:5060>;transport=sctp 9 1
>>             7 sip:10.126.55.51:5060
>>             <http://10.126.55.51:5060>;transport=sctp 9 2
>>
>>             After running "kamcmd dispatcher.reload" and "kamcmd
>>             dispatcher.list", I have the confirmation that the
>>             priorities are correctly set:
>>                             SET: {
>>                                     ID: 7
>>                                     TARGETS: {
>>                                             DEST: {
>>                                                     URI:
>>             sip:10.126.55.51:5060
>>             <http://10.126.55.51:5060>;transport=sctp
>>                                                     FLAGS: AP
>>                                                     PRIORITY: 2
>>                                             }
>>                                             DEST: {
>>                                                     URI:
>>             sip:10.126.54.51:5060
>>             <http://10.126.54.51:5060>;transport=sctp
>>                                                     FLAGS: AP
>>                                                     PRIORITY: 1
>>                                             }
>>                                     }
>>                             }
>>
>>             The dispatcher settings from kamailio.cfg is the following:
>>             modparam("dispatcher", "list_file",
>>             "/etc/kamailio/dispatcher.list")
>>             modparam("dispatcher", "flags", 2)
>>             modparam("dispatcher", "ds_ping_interval", 10)
>>             modparam("dispatcher", "ds_ping_method", "OPTIONS")
>>             modparam("dispatcher", "ds_ping_from",
>>             "sip:kamailio at sdp-t-lb2")
>>             modparam("dispatcher", "ds_probing_mode", 3)
>>             modparam("dispatcher", "dst_avp", "$avp(AVP_DST)")
>>             modparam("dispatcher", "grp_avp", "$avp(AVP_GRP)")
>>             modparam("dispatcher", "cnt_avp", "$avp(AVP_CNT)")
>>             modparam("dispatcher", "sock_avp", "$avp(AVP_SOCK)")
>>
>>             And the code which should do the displatch is the following:
>>
>>                   if (ds_is_from_list(7, 3, "$ru")) {
>>                       remove_hf("Route");
>>                       if(!ds_select_dst("7", "8")) {
>>                         send_reply("404", "No destination");
>>                         exit;
>>                       }
>>                   }
>>
>>             With the settings above, I was expecting to always have
>>             the messages delivered to 10.126.54.51. Instead, they are
>>             dispathed to 10.126.54.51 and 10.126.55.51 alternatively.
>>
>>             Thanks a lot,
>>             Cristian
>>
>>
>>             _______________________________________________
>>             Kamailio (SER) - Users Mailing List
>>             sr-users at lists.kamailio.org
>>             <mailto:sr-users at lists.kamailio.org>
>>             https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>> <https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
>>
>>
>>
>>
>>         --
>>         Daniel-Constantin Mierla - http://www.asipto.com
>>         http://twitter.com/#!/miconda
>>         <http://twitter.com/#%21/miconda> -
>>         http://www.linkedin.com/in/miconda
>>         <http://www.linkedin.com/in/miconda>
>>
>>         _______________________________________________
>>         Kamailio (SER) - Users Mailing List
>>         sr-users at lists.kamailio.org <mailto:sr-users at lists.kamailio.org>
>>         https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>         <https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla
> www.twitter.com/miconda -- www.linkedin.com/in/miconda
> Kamailio Advanced Training - May 22-24 (USA) - www.asipto.com
> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>
>



More information about the sr-users mailing list