[SR-Users] Question on the debug change level command with 5.0.x

Federico Cabiddu federico.cabiddu at gmail.com
Thu Mar 23 17:37:48 CET 2017


Hi,
you have to load the cfg_rpc module (
http://www.kamailio.org/docs/modules/5.0.x/modules/cfg_rpc.html). Then you
can run

kamcmd cfg.set_now_int core debug <LEVEL>.

Regards,

Federico

On Thu, Mar 23, 2017 at 5:24 PM, Ginhoux, Patrick <
patrick.ginhoux at fr.unisys.com> wrote:

> Hi,
>
>
>
> Previously, in my kamailio.cfg 3.3.1, the debug level is set using the
> ‘debug’ option.
>
> Then with the MI_FIFO module it was simple to change debug level on the
> flight using the simple command ‘kamctl fifo debug <new value>’.
>
>
>
> Moving to kamailio 5.0.x, there is no more MI_FIFO module. In the
> kamailio.cfg, I still have the ‘debug’ option set; so I’m looking for the
> command to use to change the debug level.
>
>
>
> I look at the debugger module that seems the solution. So I add the
> following lines in y script:
>
>
>
> debug=4
>
>
>
> loadmodule "debugger.so"
>
>
>
> modparam("debugger", "log_level", 1)
>
> modparam("debugger", "mod_hash_size", 5)
>
> modparam("debugger", "mod_level_mode", 1)
>
>
>
> Then I try to use the following commands :
>
>
>
> This one retrieves the debug level set by the debug=4) :
>
> [root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level core
>
> 4
>
>
>
> This one changed the debug level for the core module
>
> [root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level core 2
>
> 200 ok
>
>
>
> Same commands can be used for each of the module loaded:
>
>
>
> [root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level tm
>
> 4
>
> [root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level tm 2
>
> 200 ok
>
>
>
> [root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.get_mod_level dispatcher
>
> 4
>
> [root at vm-vse02-siprouter1 kamailio]# kamcmd dbg.set_mod_level dispatcher 2
>
> 200 ok
>
>
>
> Each command only applies to a specific module.
>
>
>
> I don’t find a ‘global’ command that I could use in the same manner as the
> old ‘kamctl fifo debug’ command.
>
>
>
> Is there something I missed in my config ?
>
>
>
> Cordialement
>
> Patrick GINHOUX
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20170323/7b14b1b5/attachment.html>


More information about the sr-users mailing list