[SR-Users] msilo

Daniel-Constantin Mierla miconda at gmail.com
Thu Nov 17 10:44:22 CET 2016


Hello,

if you want to fetch them for config usage is ok, otherwise m_dump() is
still better, because it takes care of removing delivered messages, etc...

Cheers,
Daniel


On 16/11/16 16:08, Slava Bendersky wrote:
> Hello Daniel,
> Yes that good alternative.  I will use sql to fetch or insert staff.
>
>
> Slava
>
> ------------------------------------------------------------------------
> *From: *"Daniel-Constantin Mierla" <miconda at gmail.com>
> *To: *"sr-users" <sr-users at lists.sip-router.org>
> *Sent: *Wednesday, 16 November, 2016 04:37:24
> *Subject: *Re: [SR-Users] msilo
>
> Hello,
>
> as an alternative, I think it should work by using sql_query(...) to
> insert whatever values one would like to have in msilo table. This
> might be a quick workaround until someone will code the extension to
> get the body via a function parameter.
>
> Cheers,
> Daniel
>
>
> On 15/11/16 16:07, Federico Cabiddu wrote:
>
>     Hi Slava,
>     if I understand correctly your scenario,
>     you could call t_on_failure before relaying the MESSAGE. In this
>     way you should have access to the original message in the failure
>     route triggered after receiving a final reply and you should be
>     able to store it with the regular msilo functions.
>     Hope this helps.
>
>     Cheers,
>
>     Federico
>
>
>     On 15 Nov 2016 3:47 pm, "Slava Bendersky" <volga629 at skillsearch.ca
>     <mailto:volga629 at skillsearch.ca>> wrote:
>
>         Hello Daniel,
>         I am not programmer, but I want place request if kaamilio devs
>         can complete it .
>         Thanks
>
>
>         Slava.
>
>         ------------------------------------------------------------------------
>         *From: *"Daniel-Constantin Mierla" <miconda at gmail.com
>         <mailto:miconda at gmail.com>>
>         *To: *"sr-users" <sr-users at lists.sip-router.org
>         <mailto:sr-users at lists.sip-router.org>>
>         *Sent: *Tuesday, 15 November, 2016 03:00:19
>         *Subject: *Re: [SR-Users] msilo
>
>         Hello,
>
>         for me it is fine to add a new parameter to m_store() that
>         takes the body content.
>
>         Are you asking for more details of how can be done?
>
>         Cheers,
>         Daniel
>
>         On 13/11/16 07:08, Slava Bendersky wrote:
>
>             Hello Everyone,
>             I asking question/request to add improvement for msilo
>             module where will have ability set $avp(i:body) in mod
>             params.  That will allow use it in m_store() by specifying
>              body message $avp.  In my case registration is on B2BUA
>             so kamailio pass through/proxy  to destination. In order
>             to check user status online/offline kamailio wait for
>             reply from B2BUA on MESSAGE status if it return error 503
>             that mean user offline and m_store(0 should store message
>             in db, but the issue that error 503 is in final stage and
>             MESSAGE body is not available any more.  The improvement
>              will allow specify  body $var in m_store() so new way
>             will be m_store($tu, $avp(body)). 
>
>             Any help thank you.
>
>             Slava.
>
>
>             _______________________________________________
>             SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>             sr-users at lists.sip-router.org
>             <mailto:sr-users at lists.sip-router.org>
>             http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>         -- 
>         Daniel-Constantin Mierla
>         http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda
>         Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
>
>         _______________________________________________ SIP Express
>         Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>         sr-users at lists.sip-router.org
>         <mailto:sr-users at lists.sip-router.org>
>         http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>         _______________________________________________ SIP Express
>         Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>         sr-users at lists.sip-router.org
>         <mailto:sr-users at lists.sip-router.org>
>         http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users 
>
> -- 
> Daniel-Constantin Mierla
> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20161117/122cce44/attachment.html>


More information about the sr-users mailing list