[SR-Users] SIP reg request not print in kamailio.log

[mayamatakeshi]

So i recommend for you to not waste your time with logging until it becomes
really necessary.
Just install sngrep <https://github.com/irontec/sngrep> and run it while
you make your test calls so that you can easily follow the message flows.

If you cannot understand kamailio behavior from SIP message flow you can
enable kamailio debug log by doing  something something like:
  kamctl fifo debug 6
and this will cause kamailio to write lots of logs indicating what it is
doing (after you finish, you can disable it by doing 'kamctl fifo debug 0'
or restarting kamailio)
However, I rarely need to do this as I usually can figure out what kamailio
is doing by reading the kamailio.cfg and checking the DB data.

You might also want to try using the module debugger
<http://www.kamailio.org/docs/modules/devel/modules/debugger.html> to do
step-by-step execution.
(although I myself never needed/used it).


On Tue, Mar 15, 2016 at 6:39 PM, Shiv Patidar <patidarshiv3 at gmail.com>
wrote:

> Thanks for help
> We need this for test /development
> On 15 Mar 2016 2:39 p.m., "Shiv Patidar" <patidarshiv3 at gmail.com> wrote:
>
>> Thank you for help
>> For registration , we would like to see the complete traces at all nodes
>> whoever processing UE sending REGISTER method.
>> could you please let me know how can we check the logging at all IMS
>> nodes?
>> i am able to successfully register and got 200OK but i want understand
>> what and all processing has been done by server?
>> can't i see default messages with the way install step i followed
>>
>>    Thanks for Your Time.
>>
>> On Fri, Mar 11, 2016 at 1:07 PM, mayamatakeshi <mayamatakeshi at gmail.com>
>> wrote:
>>
>>>
>>>
>>> On Fri, Mar 11, 2016 at 4:28 PM, Shiv Patidar <patidarshiv3 at gmail.com>
>>> wrote:
>>>
>>>> i send sip reg request to kamailio then i dump tcp thent i got sip
>>>> request like(INVITE ,TO,FROM ,via header file)
>>>> but in kamailio.log file i am not got sip request what i need to do
>>>> please help me
>>>> my kamailio.log print this log in my terminal
>>>>
>>>>
>>>> /usr/local/sbin/kamailio[25086]:INFO:<core>[main.c:798]:sig_usr():Signal
>>>> 15 received
>>>> /usr/local/sbin/kamailio[15085]:INFO:<core>[main.c:798]:sig_usr():Signal
>>>> 15 received
>>>> /usr/local/sbin/kamailio[15079]:INFO:<core>[sctp_core.c:53]:sctp_core_destroy():SCTP
>>>> API not initialized
>>>> /usr/local/sbin/kamailio[15079]:INFO:<core>[sctp_core.c:75]:sctp_core_check_support():SCTP
>>>> API not enabled-if you want to use it load sctp module
>>>> /usr/local/sbin/kamailio[23190]:INFO:rr[../outbound/api.h:54]:ob_load_api():failed
>>>> to import bind_ob
>>>> /usr/local/sbin/kamailio[23190]:INFO:rr[rr-mod.c:174]:mod_init():outbound
>>>> module not available
>>>> /usr/local/sbin/kamailio[23190]:INFO:usrloc[hslot.c:51]:ul_init_locks():locks
>>>> aaray size 1024
>>>> /usr/local/sbin/kamailio[23190]:INFO:<core>[udp_server.c:150]:probe_max_receive_buffer():SO_RCVBUF
>>>> is initially 163840
>>>> /usr/local/sbin/kamailio[23190]:INFO:<core>[udp_server.c:150]:probe_max_receive_buffer():SO_RCVBUF
>>>> is finally 327680
>>>> /usr/local/sbin/kamailio[23198]:INFO:ctl[io_listener.c:210]:io_listen_loop():io_listen_loop:using
>>>> epoll_lt as the io watch method (auto detected)
>>>> i want to print
>>>> INVITE
>>>> TO
>>>> FROM
>>>> Via
>>>> header file in my kamailio.log
>>>>
>>>
>>> Hello,
>>> use module xlog to write logs:
>>>   http://www.kamailio.org/docs/modules/4.3.x/modules/xlog.html
>>> To specify what you want to be printed, use pseudo-variables:
>>>   https://www.kamailio.org/wiki/cookbooks/4.3.x/pseudovariables
>>> For example to print the request name and the To and From URIs, add
>>> something like this:
>>> route {
>>>   xlog("L_INFO", "$rm: To=$tu From=$fu\n");
>>>   ...
>>> }
>>>
>>> regards,
>>> Takeshi
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users at lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>
>> Thank you for help
>> For registration , we would like to see the complete traces at all nodes
>> whoever processing UE sending REGISTER method.
>> could you please let me know how can we check the logging at all IMS
>> nodes?
>> i am able to successfully register and got 200OK but i want understand
>> what
>> and all processing has been done by server?
>> can't i see default messages with the way install step i followed
>>
>>    Thanks for Your Time.
>>
>> On Fri, Mar 11, 2016 at 1:07 PM, mayamatakeshi <mayamatakeshi at gmail.com>
>> wrote:
>>
>> >
>> >
>> > On Fri, Mar 11, 2016 at 4:28 PM, Shiv Patidar <patidarshiv3 at gmail.com>
>> > wrote:
>> >
>> >> i send sip reg request to kamailio then i dump tcp thent i got sip
>> >> request like(INVITE ,TO,FROM ,via header file)
>> >> but in kamailio.log file i am not got sip request what i need to do
>> >> please help me
>> >> my kamailio.log print this log in my terminal
>> >>
>> >>
>> >>
>> /usr/local/sbin/kamailio[25086]:INFO:<core>[main.c:798]:sig_usr():Signal
>> >> 15 received
>> >>
>> /usr/local/sbin/kamailio[15085]:INFO:<core>[main.c:798]:sig_usr():Signal
>> >> 15 received
>> >>
>> /usr/local/sbin/kamailio[15079]:INFO:<core>[sctp_core.c:53]:sctp_core_destroy():SCTP
>> >> API not initialized
>> >>
>> /usr/local/sbin/kamailio[15079]:INFO:<core>[sctp_core.c:75]:sctp_core_check_support():SCTP
>> >> API not enabled-if you want to use it load sctp module
>> >>
>> /usr/local/sbin/kamailio[23190]:INFO:rr[../outbound/api.h:54]:ob_load_api():failed
>> >> to import bind_ob
>> >>
>> /usr/local/sbin/kamailio[23190]:INFO:rr[rr-mod.c:174]:mod_init():outbound
>> >> module not available
>> >>
>> /usr/local/sbin/kamailio[23190]:INFO:usrloc[hslot.c:51]:ul_init_locks():locks
>> >> aaray size 1024
>> >>
>> /usr/local/sbin/kamailio[23190]:INFO:<core>[udp_server.c:150]:probe_max_receive_buffer():SO_RCVBUF
>> >> is initially 163840
>> >>
>> /usr/local/sbin/kamailio[23190]:INFO:<core>[udp_server.c:150]:probe_max_receive_buffer():SO_RCVBUF
>> >> is finally 327680
>> >>
>> /usr/local/sbin/kamailio[23198]:INFO:ctl[io_listener.c:210]:io_listen_loop():io_listen_loop:using
>> >> epoll_lt as the io watch method (auto detected)
>> >> i want to print
>> >> INVITE
>> >> TO
>> >> FROM
>> >> Via
>> >> header file in my kamailio.log
>> >>
>> >
>> > Hello,
>> > use module xlog to write logs:
>> >   http://www.kamailio.org/docs/modules/4.3.x/modules/xlog.html
>> > To specify what you want to be printed, use pseudo-variables:
>> >   https://www.kamailio.org/wiki/cookbooks/4.3.x/pseudovariables
>> > For example to print the request name and the To and From URIs, add
>> > something like this:
>> > route {
>> >   xlog("L_INFO", "$rm: To=$tu From=$fu\n");
>> >   ...
>> > }
>> >
>> > regards,
>> > Takeshi
>> >
>> > _______________________________________________
>> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> > sr-users at lists.sip-router.org
>> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>> >
>> >
>>
>>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20160316/eaaaf001/attachment.html>