[SR-Users] Kamailio Websocket Questions

Nagorny, Dimitry dimitry.nagorny at robot5.de
Fri Jun 3 13:11:58 CEST 2016


Hi all,

Got INVITE resolved, but the Errors described below persist.


Best Regards
Dimitry Nagorny
Trainee

Von: sr-users [mailto:sr-users-bounces at lists.sip-router.org] Im Auftrag von Nagorny, Dimitry
Gesendet: Freitag, 3. Juni 2016 10:39
An: Kamailio (SER) - Users Mailing List <sr-users at lists.sip-router.org>
Betreff: Re: [SR-Users] Kamailio Websocket Questions

Hello Daniel,

Thank you very much for your response. Here the portions for my websocket config. Of course all needed modules are loaded (one modparam for websocket ping) and I took the config all from http://kamailio.org/docs/modules/4.3.x/modules/websocket.html:
onreply_route[WS_REPLY] {
                if (nat_uac_test(64)) {
                               add_contact_alias();
                }
                if (proto==WS) {
                               xlog("L_INFO", "Hit Reply from Websocket");
                               rtpengine_answer("trust-address ");
                }
}
event_route[xhttp:request] {
                set_reply_close();
                set_reply_no_connect();

                if ($Rp != MY_INTERN_WSPORT){
                               xlog("L_WARN", "HTTP request received on $Rp\n");
                               xhttp_reply("403", "Forbidden", "", "");
                               exit;
                }
                if ($hdr(Upgrade)=~"websocket" && $hdr(Connection)=~"Upgrade" && $rm=~"GET") {
                               if ($hdr(Host) == $null || !is_myself("sip:" + $hdr(Host))) {
                                               xlog("L_WARN", "Bad host $hdr(Host)\n");
                                               xhttp_reply("403", "Forbidden", "", "");
                                               exit;
                               }
                               if (ws_handle_handshake()) {
                                               exit;
                               }
                }
                xhttp_reply("404", "Not Found", "", "");
}
event_route[websocket:closed] {
                xlog("L_INFO", "WebSocket connection from $si:$sp has closed\n");
}

I have attached a debug log for the registration process over websocket, on line 49 you can see the error.

As for the INVITE I use now this:
if ($rU=~"^3$" && src_ip==$sel(cfg_get.pstn.gw_ip)) {
                $ru = "sip:dnagorny at 10.250.5.74";
                uac_replace_to("sip:dnagorny at 10.250.5.74");
                rtpengine_offer("external internal trust-address");
                route(RELAY);
}

Unfortunately I can see now that Kamailio tries to send it out on 10.250.5.74:5060, which I am not even listening on. For the route(RELAY) I use this:
route[RELAY] {
                if (is_method("INVITE")) {
                               t_on_branch("MANAGE_BRANCH");
                               if (proto==WS) {
                                               t_on_reply("WS_REPLY");
                               } else {
                                               t_on_reply("MANAGE_REPLY");
                               }
                               t_on_failure("MANAGE_FAILURE");
                }
                if (is_method("CANCEL|BYE")) {
                               rtpengine_delete();
                }

                if (!t_relay()) {
                               sl_reply_error();
                }
                exit;
}

Is t_relay for Websocket the right choice? I somehow have my doubts but couldn't find any suggestion in the documentation. Additional Info: Outgoing calls from Websocket registered Users are working.
Thanks for your time helping me out.


Best Regards
Dimitry Nagorny
Trainee

Von: sr-users [mailto:sr-users-bounces at lists.sip-router.org] Im Auftrag von Daniel-Constantin Mierla
Gesendet: Freitag, 3. Juni 2016 08:36
An: Kamailio (SER) - Users Mailing List <sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>>
Betreff: Re: [SR-Users] Kamailio Websocket Questions


Hello,

1. for websocket the connection has to be reused, the server cannot open a connection towards the browser. So you don't have to force any socket, if kamailio doesn't find the address matching the target ws address, then will throw an error, otherwise will use it.

2. have you enabled xhttp and websocket modules properly?

Cheers,
Daniel

On 02/06/16 17:13, Nagorny, Dimitry wrote:
Hi List,

two questions regarding Kamailio Websockets:


1.       How do I send INVITE request TO the listening Websocket?
I usually used for UDP/TCP/TLS these format, but somehow this is not working for Websocket because it gets in an endless loop:
if ($rU=~"^(\+|00|0)?[1-9][0-9]{4,20}$") {

               $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ";user=phone;transport=udp";

               force_send_socket(udp:MY_EXTERN_IP:MY_EXTERN_PORT);

               rtpengine_offer("internal trust-address RTP AVP");

               route(RELAY);

               exit;

}


2.       Why do I get these errors every time my Websocket Client is registering, but it still works and DB is inserted with registered location:

ERROR: <core> [parser/parse_fline.c:257]: parse_first_line(): parse_first_line: bad message (offset: 22)

ERROR: <core> [parser/msg_parser.c:690]: parse_msg(): ERROR: parse_msg: message=<HTTP/1.1 101 Switching Protocols#015#012Sia: SIP/2.0/TCP 10.250.5.17:51283#015#012Sec-WebSocket-Protocol: sip#015#012Upgrade: websocket#015#012Connection: upgrade#015#012Sec-WebSocket-Accept: 6uLXlD/aBrzu/j3PYP3DWO7rvLE=#015#012Server: kamailio (4.3.5 (x86_64/linux))#015#012Content-Length: 0#015#012#015#012>

I am using Kamailio 4.3.5 + CentOS 7.2. I appreciate every help I can get.


Best Regards
Dimitry Nagorny
Trainee




_______________________________________________

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list

sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>

http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


--

Daniel-Constantin Mierla

http://www.asipto.com - http://www.kamailio.org

http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20160603/19aae173/attachment.html>


More information about the sr-users mailing list