[SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

Fri Jan 29 13:22:57 CET 2016

It logs to syslog. It depends how your syslog is configured to log data of the facility sent by Kamailio. Usually, it’ll go in /var/log/messages and/or /var/log/daemon.log by default

Phil

From: sr-users [mailto:sr-users-bounces at lists.sip-router.org] On Behalf Of Baris Sekerciler
Sent: 29 January 2016 12:17
To: Kamailio (SER) - Users Mailing List <sr-users at lists.sip-router.org>
Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

Hi,
I checked /var/logs directory for files which has relationship with Kamailio but nothing found.

Is there anything to do in this case?

Regards.

On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij.ivo at gmail.com<mailto:jurij.ivo at gmail.com>> wrote:

div dir="ltr">
Hi,
Kamilio logs should be in standard output, so basically in console, keep in mind that you need to restart kamailio after updating kamailio.cfg.
With kind regards,

2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerciler at outlook.com<mailto:baris.sekerciler at outlook.com>>:
Hello Jurjis,
I could not reach the Freeswitch DEMO IVR with IP phones which registered at Kamailio Server. I think Kamailio can not route the Freeswitch. Because phone says "Not Found" when I dialed the "455000".
And nothing to see except this at fs_cli:

freeswitch at internal> console loglevel 7
+OK log level 7 [7]
+OK console log level set to DEBUG

And I added #!define WITH_DEBUG line on Kamailio configuration file. So, where does it write logs?

Regards.

On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij.ivo at gmail.com<mailto:jurij.ivo at gmail.com>> wrote:

Hi Baris,
On freeswitch:
/usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next command run into it.
console loglevel 7
Then make a call from one extension to another and to 455000(what should be freeswitch demo IVR)
Then copy all logs, put in file and send as attachment.
On kamailio server somewhere on top add:

#!define WITH_DEBUG
Now all logs will be in console, so for same call copy logs what you get in console to separate file, attach and send too.
With kind regards,

2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerciler at outlook.com<mailto:baris.sekerciler at outlook.com>>:
Hello again,
I authanticated with Kamailio and communicate with IP phones succesfully.
But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc
When I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch.

BTW, what kind of logs do you want? Level? How can I send these are?

Regards.

________________________________
From: baris.sekerciler at outlook.com<mailto:baris.sekerciler at outlook.com>
Date: Fri, 29 Jan 2016 11:37:54 +0200
To: sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>
Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
Hello Jurjis, thanks for your answer.

I did not try default IVR with Freeswitch. But I will try and write.

Regards.

On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij.ivo at gmail.com<mailto:jurij.ivo at gmail.com>> wrote:

Hi Baris,
Are you able to dial into Freeswitch default IVR(5000 ext)?
It will helps if you send logs from Kamailio and freeswitch.

With kind regards,

2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler at outlook.com<mailto:baris.sekerciler at outlook.com>>:
Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos)
After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I adapted to Kamailio 4.3 (at least I tried)
There is nothing to different from this link.

So, I work on VmWare.
Kamailio Server IP:       192.168.2.98
FreeSwitch Server IP:   192.168.2.131

On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin at synety.com<mailto:phil.lavin at synety.com>> wrote:

You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved).

Phil

-----Original Message-----
From: sr-users [mailto:sr-users-bounces at lists.sip-router.org] On Behalf Of Baris Sekerciler
Sent: 29 January 2016 08:35
To: sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>
Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones.

So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch.

First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself.
Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work.
When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly.

So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones?

Best regards.
Thanks.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

--
Jurijs
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

--
Jurijs
___________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org<mailto:sr-users at lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

--===============18

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20160129/e588917b/attachment.html>