[SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Jurijs Ivolga]

Hi Baris,

Are you able to dial into Freeswitch default IVR(5000 ext)?

It will helps if you send logs from Kamailio and freeswitch.

With kind regards,

2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerciler at outlook.com>:

> Thanks for answer Phill. Actually I did not apply any different
> configuration than digetics in Kamailio Wiki. (I installed Kamailio latest
> stable from Deb Jessie repos)
> After that, I applied these are:
> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and
> I adapted to Kamailio 4.3 (at least I tried)
> There is nothing to different from this link.
>
> So, I work on VmWare.
> Kamailio Server IP:       192.168.2.98
> FreeSwitch Server IP:   192.168.2.131
>
>
>
>
>
> On 29 Jan 2016, at 10:38, Phil Lavin <phil.lavin at synety.com> wrote:
>
> You'll need to share your Kamailio config and some details of your network
> setup (specifically if NAT is involved).
>
>
> Phil
>
> -----Original Message-----
> From: sr-users [mailto:sr-users-bounces at lists.sip-router.org
> <sr-users-bounces at lists.sip-router.org>] On Behalf Of Baris Sekerciler
> Sent: 29 January 2016 08:35
> To: sr-users at lists.sip-router.org
> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>
> Hello everyone. I'm a student and I'm working on project which about SIP
> communication and PBXs with IP phones.
>
> So, my first test results were OK with JITSI. But I think I need
> Freeswitch for working with IP phones. In a word, I need configure an
> integration Kamailio and Freeswitch.
>
> First, I setup Debian 8.3 Jessie and installed Kamailio on this my local
> server, after that I installed another Debian 8.3 Jessie (from same image)
> as my second server and it was going to run Freeswitch on itself.
> Then I tried to send my communication requests to my Freeswitch server. I
> made some tests, my Jitsi accounts which are set in Kamailio server were
> done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio
> wiki and I applied exactly the same thing but I did not work.
> When I tried to reach another IP phone from my IP phone (I registered
> them) phone always say "NOT FOUND". I'm sure I did my configuration
> properly.
>
> So, how can I figure it out these things? How can I understand, does
> Kamailio routes to Freeswitch to my phones?
>
> Best regards.
> Thanks.
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20160129/6abec682/attachment.html>