[SR-Users] Fwd: Invalid Configuration File

Sunil More sunil.more64s at gmail.com
Wed Jan 27 18:16:03 CET 2016


Hello Andrew,

Seems like the config file is not able to find the modules. Can you check
the modules path. Compare the modules path in both the files.

Regards,
Sunil More
On Jan 27, 2016 7:36 PM, "Andrew J. Smith" <andrew.smith at kleindiek.com>
wrote:

> Hello!
>
> I followed this tutorial
> (http://kb.asipto.com/kamailio:skype-like-service-in-less-than-one-hour)
> to the T using virtual box and a debian wheezy image. Actually, I did
> change one thing:
>
> This repository "deb http://deb.kamailio.org/kamailio31-nightly
> squeeze main" always resulted in a file not found error. So I used
> these two lines instead:
>
> deb http://deb.kamailio.org/kamailio squeeze main
> deb-src http://deb.kamailio.org/kamailio squeeze main
>
> Everything else is fine except for the fact that the MySQL users have
> different names/passwords.
>
> I was able to generate users and configured everything as posted.
>
> When I start the service (/etc/init.d/kamailio start) I get an error
> message:
> "Not starting Kamailio SIP Server: invalid configuration file! ... failed!
>  failed!"
>
> followed by a looooooong list of errors (copied below).
>
> I retried with Kamailio33 (31 is not available as far as I can tell).
> This version has the MySQL users indicated in the tutorial (openser,
> openserro) - newer versions have a MySQL user named kamailio...
>
> Anyway, same long list of errors as before.
>
> I also tried the same procedure on a Raspberry Pi... Everything goes
> exactly as described until I try to start the Kamailio server.
>
> If I don't replace the original kamailio.cfg file with the one linked
> to in the tutorial, the server starts, but I can't seem to connect to
> it using Jitsi.
>
>
> What am I doing wrong? Any help would be greatly appreciated.
>
>
> Best regards,
> Andrew
>
>
> --------------------------------------------------------
> 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could not
> find module <db_mysql> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 191, column 12-24: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <mi_fifo> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 194, column 12-23: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <kex> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 195, column 12-19: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <tm> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 196, column 12-18: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <tmx> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 197, column 12-19: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <sl> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 198, column 12-18: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <rr> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 199, column 12-18: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <pv> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 200, column 12-18: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <maxfwd> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 201, column 12-22: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <usrloc> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 202, column 12-22: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <registrar> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 203, column 12-25: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <textops> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 204, column 12-23: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <siputils> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 205, column 12-24: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <xlog> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 206, column 12-20: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <sanity> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 207, column 12-22: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <ctl> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 208, column 12-19: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <mi_rpc> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 209, column 12-22: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <acc> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 210, column 12-19: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <auth> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 213, column 12-20: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <auth_db> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 214, column 12-23: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <nathelper> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 234, column 12-25: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <rtpproxy> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 235, column 12-24: failed to load
> module 0(20143) ERROR: <core> [sr_module.c:565]: load_module(): could
> not find module <tls> in
> </usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/> 0(20143)
> : <core> [cfg.y:3432]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 239, column 12-19: failed to load
> module 0(20143) ERROR: <core> [modparam.c:150]: set_mod_param_regex():
> No module matching <mi_fifo> found 0(20143) : <core> [cfg.y:3435]:
> yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg,
> line 255, column 54: Can't set module parameter 0(20143) ERROR: <core>
> [modparam.c:150]: set_mod_param_regex(): No module matching <tm> found
> 0(20143) : <core> [cfg.y:3435]: yyerror_at(): parse error in config
> file /etc/kamailio/kamailio.cfg, line 260, column 39: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <tm> found 0(20143) : <core>
> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 262, column 33: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <tm> found 0(20143) : <core>
> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 264, column 38: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <rr> found 0(20143) : <core>
> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 269, column 35: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <rr> found 0(20143) : <core>
> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 271, column 35: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <registrar> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 275, column 44: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <acc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 284, column 33: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <acc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 285, column 32: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <acc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 286, column 36: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <acc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 290, column 38: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <acc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 292, column 30: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <acc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 293, column 37: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <acc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 295, column 73: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <acc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 296, column 45: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <usrloc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 310, column 75: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <usrloc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 311, column 32: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <usrloc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 312, column 35: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <auth_db> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 318, column 76: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <auth_db> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 319, column 41: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <auth_db> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 320, column 50: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <auth_db> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 321, column 43: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <auth_db> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 322, column 36: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <rtpproxy> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 363, column 77: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <nathelper> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 366, column 45: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <nathelper> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 367, column 43: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <nathelper> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 368, column 41: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <nathelper> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 369, column 64: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <nathelper|registrar> found
> 0(20143) : <core> [cfg.y:3435]: yyerror_at(): parse error in config
> file /etc/kamailio/kamailio.cfg, line 372, column 65: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <usrloc> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 373, column 34: Can't set module
> parameter 0(20143) ERROR: <core> [modparam.c:150]:
> set_mod_param_regex(): No module matching <tls> found 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 379, column 50: Can't set module
> parameter 0(20143) ERROR: <core> [cfg.y:3295]: yyparse(): cfg. parser:
> failed to find command is_method (params 1) 0(20143) : <core>
> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 418, column 24: unknown command,
> missing loadmodule? 0(20143) ERROR: <core> [cfg.y:3295]: yyparse():
> cfg. parser: failed to find command t_check_trans (params 0) 0(20143)
> : <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 420, column 21: unknown command,
> missing loadmodule? 0(20143) ERROR: <core> [cfg.y:3295]: yyparse():
> cfg. parser: failed to find command t_relay (params 0) 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 421, column 12: unknown command,
> missing loadmodule? 0(20143) ERROR: <core> [cfg.y:3295]: yyparse():
> cfg. parser: failed to find command t_check_trans (params 0) 0(20143)
> : <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 425, column 16: unknown command,
> missing loadmodule? 0(20143) ERROR: <core> [cfg.y:3295]: yyparse():
> cfg. parser: failed to find command remove_hf (params 1) 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 432, column 19: unknown command,
> missing loadmodule? 0(20143) ERROR: <core> [cfg.y:3295]: yyparse():
> cfg. parser: failed to find command is_method (params 1) 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 433, column 34: unknown command,
> missing loadmodule? 0(20143) ERROR: <core> [cfg.y:3295]: yyparse():
> cfg. parser: failed to find command record_route (params 0) 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 434, column 16: unknown command,
> missing loadmodule? 0(20143) ERROR: <core> [cfg.y:3295]: yyparse():
> cfg. parser: failed to find command is_method (params 1) 0(20143) :
> <core> [cfg.y:3435]: yyerror_at(): parse error in config file
> /etc/kamailio/kamailio.cfg, line 437, column 24: unknown command,
> missing loadmodule? 0(20143) ERROR: <core> [pvapi.c:825]:
> pv_parse_spec2(): error searching pvar "rU" 0(20143) ERROR: <core>
> [pvapi.c:1029]: pv_parse_spec2(): wrong char [U/85] in [$rU] at [2
> (0)] 0(20143) : <core> [cfg.y:3432]: yyerror_at(): parse error in
> config file /etc/kamailio/kamailio.cfg, line 453, column 6-8: Can't
> get from cache: $rU ERROR: bad config file (63 errors) 0(20143) INFO:
> <core> [sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized
> ... failed!
>  failed!
> --------------------------------------------------------
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20160127/63ea3044/attachment.html>


More information about the sr-users mailing list