[SR-Users] Kamailio and freeswitch integration for SBC
Daniel-Constantin Mierla
miconda at gmail.com
Wed Jan 13 07:34:33 CET 2016
Hello,
the error with creating the SIP UA is most probable because of kamailio
listening on 5060 and freeswitch trying to do the same.
To troubleshoot the 408, use ngrep or other network sniffing tool, and
look on the network to see where the sip request is sent. Like:
ngrep -d any -qt -W byline port 5060
Cheers,
Daniel
On 13/01/16 00:52, malik sherif wrote:
>
> Hello Daniel,
>
> No I didn't configure freeswitch with loopback but for some reason it
> was going to the loopback , it consider it as default network but I am
> able to point both kamailio and freeswitch to 10.22.52.2 by disabling
> IP-v6 for both external-ipv6.xml and internal-ipv6.xml. Freeswitch was
> complaining about the following error.
>
> |sofia.c:2853 Error Creating SIP UA for profile: internal-ipv6
> (sip:mod_sofia@[::1] :5060;transport=udp,tcp) ATTEMPT 2 (RETRY IN 5 SEC)|
> netstat -unlp now shows what I want but call is time out with 408, I
> might have to check if port 5090 reachable but I am still wandering
> why i am getting 408.
>
>
> udp 0 0 10.22.52.2:5060
> 0.0.0.0:* 10603/kamailio
> udp 0 0 10.22.52.2:5090
> 0.0.0.0:* 10469/freeswitch
>
> udp 0 0 10.22.52.2:5092
> 0.0.0.0:* 10469/freeswitch
>
>
> Thanks again Daniel for responding
>
> Abdul
>
>
> ------------------------------------------------------------------------
> *From:* sr-users <sr-users-bounces at lists.sip-router.org> on behalf of
> Daniel-Constantin Mierla <miconda at gmail.com>
> *Sent:* Tuesday, January 12, 2016 11:07 PM
> *To:* Kamailio (SER) - Users Mailing List
> *Subject:* Re: [SR-Users] Kamailio and freeswitch integration for SBC
>
> Hello,
>
> did you configure the freeswitch to listen on loopback? You would need
> to do bridging of singnaling and eventually rtp between the network
> interface and loopback if you want this kind of topology.
>
> Cheers,
> Daniel
>
> On 12/01/16 19:00, malik sherif wrote:
>>
>> Hello Abdul Basit,
>>
>> I specified that kamailio and freeswitch to share same IP address but
>> different udp port but netstat -unlp show freeswitch use the loopback
>> IP address (port 5090 and 5092) and kamailio show the loopback IP and
>> 10.22.52.2 port 5060. Does freeswitch has to go to loopback IP address?
>>
>> Thank you very much Abdul Basit for responding.
>>
>> Abdulmalik Sherif
>>
>>
>>
>> udp 0 0 10.22.52.2:5060
>> 0.0.0.0:* 31036/kamailio
>> udp 0 0 127.0.0.1:5060
>> 0.0.0.0:* 31036/kamailio
>> udp 0 0 127.0.0.1:5090
>> 0.0.0.0:* 30958/freeswitch
>> udp 0 0 127.0.0.1:5092
>> 0.0.0.0:* 30958/freeswitch
>>
>> ------------------------------------------------------------------------
>> *From:* sr-users <sr-users-bounces at lists.sip-router.org> on behalf of
>> Abdul Basit <basitstar at hotmail.com>
>> *Sent:* Tuesday, January 12, 2016 2:55 AM
>> *To:* Kamailio SER - Users Mailing List
>> *Subject:* Re: [SR-Users] Kamailio and freeswitch integration for SBC
>>
>> Hi AbdulMalik,
>>
>>
>> brother this is not kamailio related issue, this is some
>> misconfiguration.
>> I think, there is some port misconfiguration , kamailio running on
>> 5060 and also freeswitch running on 5060, make ur kamailio run
>> specfically on 5060, and freeswitch on different port entirely.
>> please do it and share netstat result again
>>
>> udp 0 0 10.22.52.2:5060
>> 0.0.0.0:* 9075/kamailio
>> udp 0 0 ::1:5060
>> :::* 9002/freeswitch
>>
>>
>> Regards,
>> AB
>> ------------------------------------------------------------------------
>> From: asherif74 at hotmail.com
>> To: sr-users at lists.sip-router.org
>> Date: Mon, 11 Jan 2016 23:47:41 +0000
>> Subject: Re: [SR-Users] Kamailio and freeswitch integration for SBC
>>
>> When I run netstat -unlp command it show the following list. Is it
>> correct for freeswitch to have the loopback IP address? I think this
>> is maybe a reason the invite is timeout with 408 but I am not sure.
>> How can I fix this problem? I just want to confirm if integrating
>> Kamailio with freeswitch works as SBC?
>> Thanks Again
>>
>>
>>
>>
>> udp 0 0 10.22.52.2:7060
>> 0.0.0.0:* 9075/kamailio
>> udp 0 0 10.22.52.2:5060
>> 0.0.0.0:* 9075/kamailio
>> udp 0 0 127.0.0.1:5090
>> 0.0.0.0:* 9002/freeswitch
>> udp 0 0 127.0.0.1:5092
>> 0.0.0.0:* 9002/freeswitch
>> udp 0 0 ::1:5060
>> :::* 9002/freeswitch
>> udp 0 0 ::1:5080
>> :::* 9002/freeswitch
>>
>>
>>
>> ------------------------------------------------------------------------
>> *From:* sr-users <sr-users-bounces at lists.sip-router.org> on behalf of
>> malik sherif <asherif74 at hotmail.com>
>> *Sent:* Monday, January 11, 2016 5:03 PM
>> *To:* sr-users at lists.sip-router.org
>> *Subject:* Re: [SR-Users] Kamailio and freeswitch integration for SBC
>>
>> Hello,
>> Any hint? How do I get a response? is it through user digest?
>> Thanks
>> Abdulmalik Sherif
>>
>>
>>
>> ------------------------------------------------------------------------
>> *From:* sr-users <sr-users-bounces at lists.sip-router.org> on behalf of
>> malik sherif <asherif74 at hotmail.com>
>> *Sent:* Friday, January 8, 2016 7:39 PM
>> *To:* sr-users at lists.sip-router.org
>> *Subject:* [SR-Users] Kamailio and freeswitch integration for SBC
>>
>> Hello,
>> I was able to have successful call with kamailio and after
>> integrating kamailio with freeswitch using the following link, the
>> invite timeout and as a result the call failed.The status on kamailio
>> show these info. Do I need to download outbound model? I am running
>> kamailio ver 4.1.1 and freeswitch 1.4.18.
>>
>>
>> kamailio[19153]: 0(19162) INFO: rr [../outbound/api.h:54]:
>> ob_load_api(): Failed to import bind_ob
>> kamailio[19153]: 0(19162) INFO: rr [rr_mod.c:159]: mod_init():
>> outbound module not available
>>
>>
>> http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc
>> <http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc>
>>
>> freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc [Asipto ...
>> <http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc>
>> kb.asipto.com
>> The scope of this tutorial is to show how you can use Kamailio
>> (former OpenSER) and FreeSWITCH to build a complete SIP/VoIP platform
>> for large number of subscribers.
>>
>>
>>
>>
>> Thank you very much and your help is appreciated.
>> Thanks
>> Abdul
>>
>>
>>
>>
>>
>>
>> <http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc>
>> <http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc>
>>
>> freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc [Asipto ...
>> <http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc>
>> kb.asipto.com
>> The scope of this tutorial is to show how you can use Kamailio
>> (former OpenSER) and FreeSWITCH to build a complete SIP/VoIP platform
>> for large number of subscribers.
>>
>>
>>
>>
>>
>> _______________________________________________ SIP Express Router
>> (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla
> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
> Book: SIP Routing With Kamailio - http://www.asipto.com
> http://miconda.eu
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com
http://miconda.eu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20160113/cc012cb3/attachment.html>
More information about the sr-users
mailing list