[SR-Users] tls with ubuntu 16.04

[Jayesh Nambiar]

Hi Daniel,
Just checking if you had a chance to look at ssl libraries in Ubuntu16.04
to check the conflict with TLS module? Thanks.

- Jayesh

On Tue, Jul 19, 2016 at 6:11 PM Daniel-Constantin Mierla <miconda at gmail.com>
wrote:

> Hello,
>
> following up -- apparently there is some issue with the lib in ubuntu
> 16.04, same module working fine in 15.10, as reported on the tracker:
>
>   - https://github.com/kamailio/kamailio/issues/714
>
> When I get a chance I will install a ubuntu 16.04 myself and dig more into
> the libssl sources.
>
> Cheers,
> Daniel
>
> On 18/07/16 14:46, Jayesh Nambiar wrote:
>
> Hi Daniel,
>
> Thanks for looking into this. I tried with this patch and still get the
> same error. Here are the relevant part of logs:
>
>  0(25032) DEBUG: <core> [cfg.y:1603]: yyparse(): loading module tls.so
>
>  0(25032) DEBUG: <core> [sr_module.c:575]: load_module(): trying to load
> </usr/local/kamailio/lib64/kamailio/modules/tls.so>
>
>  0(25032) DEBUG: <core> [mem/q_malloc.c:189]: qm_malloc_init():
> qm_malloc_init: QM_OPTIMIZE=16384, /ROUNDTO=2048
>
>  0(25032) DEBUG: <core> [mem/q_malloc.c:191]: qm_malloc_init():
> qm_malloc_init: QM_HASH_SIZE=2099, qm_block size=235152
>
>  0(25032) DEBUG: <core> [mem/q_malloc.c:193]: qm_malloc_init():
> qm_malloc_init(0x7fda8249d000, 67108864), start=0x7fda8249d000
>
>  0(25032) DEBUG: <core> [mem/q_malloc.c:202]: qm_malloc_init():
> qm_malloc_init: size= 67108864, init_overhead=235256
>
>  0(25032) ERROR: tls [tls_init.c:493]: tls_pre_init(): Unable to set the
> memory allocation functions
>
>  0(25032) ERROR: tls [tls_init.c:495]: tls_pre_init(): libssl current mem
> functions - m: 0x7fda87673550 r: 0x7fda87673c40 f: 0x7fda87673a70
>
>  0(25032) ERROR: tls [tls_init.c:497]: tls_pre_init(): Be sure tls module
> is loaded before any other module using libssl (can be loaded first to be
> safe)
>
>  0(25032) ERROR: <core> [sr_module.c:607]: load_module():
> /usr/local/kamailio/lib64/kamailio/modules/tls.so: mod_register failed
>
>  0(25032) : <core> [cfg.y:3391]: yyerror_at(): parse error in config file
> /usr/local/kamailio/etc/kamailio/tlkn-edge/kamailio.cfg, line 47, column
> 12-19: failed to load module
>
>
> Yes I can provide ssh access to this machine. I'll send it to you
> seperately.
>
> Thanks,
>
> - Jayesh
>
>
> On Mon, Jul 18, 2016 at 2:25 PM Daniel-Constantin Mierla <
> miconda at gmail.com> wrote:
>
>> Hello,
>>
>> no time over the weekend to look at logs, but I pushed just now a patch
>> to try to see if the memory functions were set or something else prevented
>> the set of memory functions.
>>
>> Can you try with the patch:
>>
>>   -
>> https://github.com/kamailio/kamailio/commit/966513b374eef598434c5310a43eac2735adfd2e
>>
>> I am at IEFT96 so I will try to do some stuff during the breaks... if
>> doesn't work, then it may take a bit to get more into it.
>>
>> Just in case, would it be possible to get ssh access to such system?
>>
>> Cheers,
>> Daniel
>>
> --
> Daniel-Constantin Mierlahttp://www.asipto.com - http://www.kamailio.orghttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20160801/b4b96f30/attachment.html>