[SR-Users] Kamailio/RTPProxy incorrect port 0

Maxim Sobolev sobomax at sippysoft.com
Tue Nov 24 06:25:50 CET 2015 

Try setting some more reasonable FD limit, i.e. say 10,000. Bumping from
1,000 to 500,000 seems somewhat excessive. You can also see if you also
need to use matching -L option, there might be separate soft limit that
application needs to lift by itself. In general, when session creation
fails you should see any of those error messages: 10,000 is plenty, that's
2,000 sessions with 5 sockets per session. One instance is going to be
CPU-limited at around 1,000 sessions with the current top CPUs and software
architecture.

            RTPP_ELOG(cf->glog, RTPP_LOG_ERR, "can't create %s socket",
              (ia->sa_family == AF_INET) ? "IPv4" : "IPv6");

                RTPP_ELOG(cf->glog, RTPP_LOG_ERR, "can't bind to the %s
port %d",
                  (ia->sa_family == AF_INET) ? "IPv4" : "IPv6", port);

I suggest checking logs around that "0" reply, There should be some clue.

On Mon, Nov 23, 2015 at 5:37 AM, Igor Potjevlesch <
igor.potjevlesch at gmail.com> wrote:

> Hello Daniel, Dirk,
>
> I'm also seeing that these errors seems to be related to the load. Because
> the errors are present during peak of traffic.
>
> Many of the cases are not updates but new calls.
> Regarding to the file descriptors : I set the limit to 500000:
>
> Max open files            500000               500000               files
>
>
> And if I had a look to the opened files with, globally, "lsof | grep rtppro
> | wc -l", there is still less than 1000.
>
> RTPProxy is already running with -d DBUG. I can see that there are update
> which fail because the log is associated to a call handled into On Reply
> Route.
>
> How can be explained that the RTPProxy can't find the call? And what is the
> impact on the call?
>
> Regards,
>
> Igor.
>
> -----Message d'origine-----
> De : sr-users [mailto:sr-users-bounces at lists.sip-router.org] De la part de
> Daniel-Constantin Mierla
> Envoyé : lundi 23 novembre 2015 09:33
> À : Kamailio (SER) - Users Mailing List <sr-users at lists.sip-router.org>
> Objet : Re: [SR-Users] Kamailio/RTPProxy incorrect port 0
>
> Hello,
>
> typical reasons for this error are:
>
> - the session is not found by rtpproxy (if it was an update command)
> - rtpproxy run out of file descriptors (check the limits of your system
> regarding opened files per process)
> - some internal error of rtpproxy (see if there are errors in syslog from
> rtpproxy, you can also run it in debug mode with -D DBUG command line
> parameters)
>
> Cheers,
> Daniel
>
> On 23/11/15 09:09, Dirk Teurlings - SIGNET B.V. wrote:
> > I'm seeing the exact same message sometimes as well.
> >
> > For me it seems to be tied to volume, as soon as a lot of calls are
> > coming from an interconnect this could occur. Also, as soon as this
> > happens both incoming and outgoing calls have audio problems.
> >
> > My RTP instance isn't as much patched as your version, and I'm also
> > not seeing the other INFO packages, just the 0 port error message.
> >
> > Any insight would be appreciated.
> > Dirk
> >
> >
> > On 20-11-15 19:25, Igor Potjevlesch wrote:
> >> To complete my message, each "incorrect port 0…" is preceded with the
> >> following logs:
> >>
> >> rtpproxy[3289]:
> >>
> INFO:rtpp_command_ul_handle:ebf8863557e5c8709e46ba48c1f8f780 at 10.5.129.117:
> >>
> >> RTP packets from caller will be resized to 20 milliseconds
> >>
> >> rtpproxy[3289]: ERR:rtpp_command_pre_parse:GLOBAL: update/create
> >> command syntax error: invalid number of arguments (1)
> >>
> >> I use the following version:
> >>
> >> rtpproxy -v
> >>
> >> Basic version: 20040107
> >>
> >> Extension 20050322: Support for multiple RTP streams and MOH
> >>
> >> Extension 20060704: Support for extra parameter in the V command
> >>
> >> Extension 20071116: Support for RTP re-packetization
> >>
> >> Extension 20071218: Support for forking (copying) RTP stream
> >>
> >> Extension 20080403: Support for RTP statistics querying
> >>
> >> Extension 20081102: Support for setting codecs in the update/lookup
> >> command
> >>
> >> Extension 20081224: Support for session timeout notifications
> >>
> >> Extension 20090810: Support for automatic bridging
> >>
> >> Extension 20140323: Support for tracking/reporting load
> >>
> >> Extension 20140617: Support for anchoring session connect time
> >>
> >> Extension 20141004: Support for extendable performance counters
> >>
> >> Extension 20150330: Support for allocating a new port ("Un"/"Ln"
> >> commands)
> >>
> >> Extension 20150420: Support for SEQ tracking and new rtpa_ counters;
> >> Q command extended
> >>
> >> Regards,
> >>
> >> Igor.
> >>
> >> *De :*Igor Potjevlesch [mailto:igor.potjevlesch at gmail.com]
> >> *Envoyé :* vendredi 20 novembre 2015 19:09 *À :*
> >> sr-users at lists.sip-router.org *Objet :* Kamailio/RTPProxy incorrect
> >> port 0
> >>
> >> Hello,
> >>
> >> I can't figure out why Kamailio reports hundreds of calls with the
> >> following error:
> >>
> >> "/usr/local/sbin/kamailio[2997]: ERROR: rtpproxy [rtpproxy.c:2727]:
> >> force_rtp_proxy(): incorrect port 0 in reply from rtp proxy"
> >>
> >> It seems that each time this error occurs, we got a one-way audio call.
> >>
> >> I already check and increase the limit for opening files that the
> >> process can open with ulimit -n 500000. But, anyway, if I look to
> >> /proc/$PID/fd, I never see more than 1000 files open.
> >>
> >> I also check the socket with netstat: same; I can see the error while
> >> there's only less than 800 sockets open.
> >>
> >> Is someone know what can be the trigger of this?
> >>
> >> Regards,
> >>
> >> Igor.
> >>
> >>
> >>
> >> _______________________________________________
> >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
> >> list sr-users at lists.sip-router.org
> >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> >>
> >
> > _______________________________________________
> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
> > list sr-users at lists.sip-router.org
> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla
> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
> Book: SIP Routing With Kamailio - http://www.asipto.com Kamailio Advanced
> Training, Nov 30-Dec 2, Berlin - http://asipto.com/kat
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>



-- 
Maksym Sobolyev
Sippy Software, Inc.
Internet Telephony (VoIP) Experts
Tel (Canada): +1-778-783-0474
Tel (Toll-Free): +1-855-747-7779
Fax: +1-866-857-6942
Web: http://www.sippysoft.com
MSN: sales at sippysoft.com
Skype: SippySoft
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20151123/77d7635c/attachment.html>

More information about the sr-users mailing list