[SR-Users] RTPEngine IPv4 to IPv6 bridging returning c=IN IP4 0.0.0.0 on answer?

Sergey Okhapkin sos at sokhapkin.dyndns.org
Wed Feb 25 02:30:48 CET 2015


Which IP address has been sent to carrier in SDP offer? GLOBAL_IPv6 or 
EXTERNAL_IPv4?

On Tuesday 24 February 2015 19:20:15 Anthony Messina wrote:
> This is probably very likely a configuration issue on my part, but I wanted
> to check before reporting an RTPEngine bug...
> 
> Thank you for any pointers or suggestions.
> 
> This is a multi-homed server where
> 
> em1: INTERNAL_IPv4 & GLOBAL_IPv6
> em2: EXTERNAL_IPv4
> 
> Note that below, the IPv6 address on my server is the same on priv and pub
> and is reachable from "internal" and "external" endpoints.  I have it set
> this way as I eventually want to use ICE and have it create the proper
> IPv4/IPv6 candidates regardless of the RTPEngine --interface.
> 
> I'm running RTPEngine with the following:
> 
> /usr/sbin/rtpengine
> 	--table=0
> 	--interface=pub/EXTERNAL_IPv4
> 	--interface=pub/GLOBAL_IPv6
> 	--interface=priv/INTERNAL_IPv4
> 	--interface=priv/GLOBAL_IPv6
> 	--listen-ng=127.0.0.1:12221
> 	--tos=184
> 	--log-level=7
> 	--pidfile=/run/rtpengine/rtpengine.test.pid
> 
> I'm trying to bridge an IPv4-initated call to an IPv6 carrier. The call
> seems to flow properly until the carrier's SDP is passed through RTPEngine
> on answer.  The snippets are here, and I have attached the full log.
> 
> [TdBe4MJa1DC4teIllJkqq6U-PAw9Zh4y] Received command 'answer' from
> 127.0.0.1:38786
> [TdBe4MJa1DC4teIllJkqq6U-PAw9Zh4y] Dump for 'answer' from 127.0.0.1:38786: {
> "sdp": "v=0
> o=FreeSWITCH 1424799070 1424799071 IN IP6 CARRIER_IPv6
> s=FreeSWITCH
> c=IN IP6 CARRIER_IPv6
> t=0 0
> m=audio 24308 RTP/AVP 0 101
> a=rtpmap:0 PCMU/8000
> a=rtpmap:101 telephone-event/8000
> a=fmtp:101 0-16
> a=silenceSupp:off - - - -
> a=ptime:20
> a=rtcp:24309 IN IP6 CARRIER_IPv6
> 
> 
> The CARRIER_IPv6 gets converted as follows with 0.0.0.0 in place of what
> should be the address of my RTPEngine instance.  Shouldn't it be returning
> the IPv4 address of my RTPEngine instance (either priv or pub as called
> from Kamailio)?
> 
> [TdBe4MJa1DC4teIllJkqq6U-PAw9Zh4y] Replying to 'answer' from 127.0.0.1:38786
> [TdBe4MJa1DC4teIllJkqq6U-PAw9Zh4y] Response dump for 'answer' to
> 127.0.0.1:38786: { "sdp": "v=0
> o=FreeSWITCH 1424799070 1424799071 IN IP4 0.0.0.0
> s=FreeSWITCH
> c=IN IP4 0.0.0.0
> t=0 0
> m=audio 38914 RTP/SAVP 0 101
> a=rtpmap:0 PCMU/8000
> a=rtpmap:101 telephone-event/8000
> a=fmtp:101 0-16
> a=silenceSupp:off - - - -
> a=ptime:20
> a=sendrecv
> a=rtcp:38915
> a=crypto:1 AES_CM_128_HMAC_SHA1_80
> inline:Jby5IPt4WlNySLd66eK+Mcky8yJeUwp7dWH7W3aO



More information about the sr-users mailing list