[SR-Users] dmq_usrloc

Thu Aug 13 13:54:03 CEST 2015

Hello,

>From which version has this been generated?

Also, can you provide the output of "kamctl ul show" and the relevant
modparam sections of your config (usrloc, dmq, dmq_usrloc).

Cheers,
Charles

On 13 August 2015 at 10:23, Kelvin Chua <kelchy at gmail.com> wrote:

> I don't know if this is related, this happens on 4.3.1 as well but usrloc
> crashes once it gets a DMQ
>
> #0  0x00007f2a82a5727c in get_urecord_by_ruid (_d=0x0, _aorhash=8118438,
> _ruid=0x7ffe6028d5c0, _r=0x7ffe6028d568, _c=0x7ffe6028d578)
>     at udomain.c:1153
> #1  0x00007f2a8282029a in usrloc_get_all_ucontact (node=0x7f2a01790998) at
> usrloc_sync.c:166
> #2  0x00007f2a828240a7 in usrloc_dmq_handle_msg (msg=0x7f2a01790f78,
> resp=0x7ffe6028d820, node=0x7f2a01790998) at usrloc_sync.c:363
> #3  0x00007f2a83959e6f in worker_loop (id=1) at worker.c:105
> #4  0x00007f2a8393e566 in child_init (rank=0) at dmq.c:293
> #5  0x0000000000599658 in init_mod_child (m=0x7f2a86955c78, rank=0) at
> sr_module.c:898
> #6  0x0000000000599390 in init_mod_child (m=0x7f2a86956098, rank=0) at
> sr_module.c:895
> #7  0x0000000000599390 in init_mod_child (m=0x7f2a86956a78, rank=0) at
> sr_module.c:895
> #8  0x0000000000599390 in init_mod_child (m=0x7f2a86956e68, rank=0) at
> sr_module.c:895
> #9  0x0000000000599390 in init_mod_child (m=0x7f2a869570f8, rank=0) at
> sr_module.c:895
> #10 0x0000000000599390 in init_mod_child (m=0x7f2a86957498, rank=0) at
> sr_module.c:895
> #11 0x0000000000599390 in init_mod_child (m=0x7f2a86957838, rank=0) at
> sr_module.c:895
> #12 0x0000000000599390 in init_mod_child (m=0x7f2a86957db0, rank=0) at
> sr_module.c:895
> #13 0x0000000000599390 in init_mod_child (m=0x7f2a86958090, rank=0) at
> sr_module.c:895
> #14 0x0000000000599390 in init_mod_child (m=0x7f2a869582c0, rank=0) at
> sr_module.c:895
> #15 0x0000000000599390 in init_mod_child (m=0x7f2a869589b0, rank=0) at
> sr_module.c:895
> #16 0x0000000000599390 in init_mod_child (m=0x7f2a86958f88, rank=0) at
> sr_module.c:895
> #17 0x0000000000599390 in init_mod_child (m=0x7f2a869594d8, rank=0) at
> sr_module.c:895
> #18 0x000000000059996c in init_child (rank=0) at sr_module.c:924
> #19 0x00000000004aa753 in main_loop () at main.c:1650
> #20 0x00000000004b02b0 in main (argc=13, argv=0x7ffe6028e318) at
> main.c:2533
>
>
> Kelvin Chua
>
> On Sat, Aug 8, 2015 at 12:09 AM, Asgaroth <00asgaroth00 at gmail.com> wrote:
>
>> Hi,
>>
>>
>>
>> Yes, I do see it replicating contacts to the other 2 servers on the dmq
>> bus, however, I did come across a strange issue with the max contacts
>> parameter, which the devs are looking at:
>>
>>
>>
>> https://github.com/kamailio/kamailio/issues/265
>>
>>
>>
>> Cheers
>>
>>
>>
>>
>>
>> *From:* sr-users [mailto:sr-users-bounces at lists.sip-router.org] *On
>> Behalf Of *Kelvin Chua
>> *Sent:* Friday 7 August 2015 14:56
>> *To:* Kamailio (SER) - Users Mailing List <sr-users at lists.sip-router.org>
>> *Subject:* Re: [SR-Users] dmq_usrloc
>>
>>
>>
>> have you seen your usrloc actually populate data from another server?
>>
>> i can verify my dmq is working properly. just usrloc not populating.
>>
>>
>> Kelvin Chua
>>
>>
>>
>> On Fri, Aug 7, 2015 at 6:22 PM, Asgaroth <00asgaroth00 at gmail.com> wrote:
>>
>> Hi,
>>
>>
>>
>> I’m a new user to the dmq subsystem in kamailio, but, once I had a
>> properly configured dmq environment and loaded dmq_usrloc after dmq, all I
>> had to do was add the following to the module paramters:
>>
>>
>>
>> modparam("dmq_usrloc", "enable", 1)
>>
>>
>>
>> Then in the routing logic of the registrar’s you just need to add the
>> appropriate dmq message handling blocks.
>>
>>
>>
>> Hope this helps in some way.
>>
>>
>>
>>
>>
>>
>>
>> *From:* sr-users [mailto:sr-users-bounces at lists.sip-router.org] *On
>> Behalf Of *Kelvin Chua
>> *Sent:* Thursday 6 August 2015 07:29
>> *To:* SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
>> Users Mailing List <sr-users at lists.sip-router.org>
>> *Subject:* [SR-Users] dmq_usrloc
>>
>>
>>
>> is there any function to trigger replication?
>>
>>
>>
>> i enabled the module and dmq is working for my htables
>>
>> but usrloc is not replicating.
>>
>>
>>
>> "kamctl ul show" does not show anything
>>
>>
>>
>> i used ngrep to trace the KDMQ packets, i can see the frequent exchanges
>> but nothing related to usrloc. am i doing something wrong?
>>
>>
>> Kelvin Chua
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>

-- 
*Charles Chance*
Managing Director

t. 0121 285 4400    m. 07932 063 891

-- 
*** We're rebranding! Learn more here 
<http://www.sipcentric.com/2015/07/were-rebranding/> ***

www.sipcentric.com

Follow us on twitter @sipcentric <http://twitter.com/sipcentric>

Sipcentric Ltd. Company registered in England & Wales no. 7365592. Registered 
office: Faraday Wharf, Innovation Birmingham Campus, Holt Street, 
Birmingham Science Park, Birmingham B7 4BB.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20150813/bef1bd7e/attachment.html>