[SR-Users] reg_fetch_contacts for multiple devices registered
Jonathan Hunter
hunterj91 at hotmail.com
Wed May 14 17:54:25 CEST 2014
Hi Daniel,
Sorry to bug you just wondered if had a chance to consider the branching question?
Main thing is does append_branch work on 4.0 ?
And also the best way to implement branch routes?
Thanks
Jon
Hello,
I am getting there!
I am not using a branch routing block at present, I am doing modifications using values I pull from the location table.
So my question may be slightly different but very much branch related.
So I have two contacts;
Contact:: <sip:1009 at 213.123.211.158:15060;transport=udp;registering_acc=91_208_141_34>;q=;expires=60;flags=0x0;cflags=0x0;state=1;socket=<udp:xx.xx.xx.xx:5060>;methods=0xFFFFFFFF;user_agent=<Contact1>;reg-id=0Contact:: <sip:1009 at 213.123.211.158:5061;transport=udp>;q=;expires=3191;flags=0x0;cflags=0xC0;state=1;socket=<udp:xx.xx.xx.xx:5060>;methods=0xFFFFFFFF;received=<sip:213.123.211.158:49827>;user_agent=<Contact2>;+sip.instance=<urn:uuid:00000000-0000-0000-0000-58bfea20a6bd>;reg-id=0
Then using reg_fetch_contacts I get for each registered contact;
xlog("callee=>user_agent: $(ulc(callee=>user_agent)[$var(i)])\n"); xlog("callee=>received: $(ulc(callee=>received)[$var(i)])\n"); xlog("callee=>addr1: $(ulc(callee=>addr)[$var(i)])\n");
And define some variables as a result for each contact;
$var(ua1) = $(ulc(callee=>user_agent)[$var(i)]); $var(ua1add) = $(ulc(callee=>received)[$var(i)]); $var(ua1aor) = $(ulc(callee=>addr)[$var(i)]);
I then use these to set $du and $ru in the main routing, I do this for contact2 above, so I send to the recieved port (49827), identifying this by user agent type.
This works fine however branch[0] was sending an INVITE TO 1009 at 213.123.211.158:5061, contact2 also, and not contact1 (port 15060), so I have added;
$(branch(dst_uri)[0]) = $var(ua1aor);
So I now get parallel forking as follows;
INVITE sip:1009- at 213.123.211.158:49827 < This is what I want, for Contact2INVITE sip:1009- at 213.123.211.158:15060 < Again routes to Contact1 after modifiying the branch parameter.INVITE sip:1009- at 213.123.211.158:5061 < Still sends out original branch value.
And can see from debug, my branch [0] is modifed, but branch [1] is also created;
new branch [0] to sip:1009 at 213.123.211.158:49827new branch [1] to sip:1009 at 213.123.211.158:5061
So I now have 3 invites for 2 devices.
Whats the best approach to clean this up or implement in the first place, my main question is probably around branch modification/control.
Thanks, sorry for long question.
Jon
Date: Tue, 13 May 2014 16:04:21 +0200
From: miconda at gmail.com
To: sr-users at lists.sip-router.org
Subject: Re: [SR-Users] reg_fetch_contacts for multiple devices registered
Hello,
are you using a branch_route block?
Cheers,
Daniel
On 13/05/14 13:28, Jonathan Hunter
wrote:
Hi Guys,
Following on from my initial query, I have indexing working
for reg_fetch_contacts, however now I am
having issues with branching.
First, is append_branches() still applicable to kamailio
4.0.6 ? As when I use its not recognised.
Also I have two contacts registered, contact 0 and contact
1.
Contact 0 was registered first, then contact 1.
Now I perform manipulation on the main branch after
identifying the user agent for contact 1, and the main
branch request is sent out as I wish, this uses branch [0]
when running debug to the $ru/$du I have modified.
However with branch [1] this isnt modified which is fine,
but uses the contact AOR from Contact 1 and not Contact 0.
Is this normal behaviour and I just need to improve my
logic?
Any advise on parallel branching where you extract certain
credentials from location table, then as a result
manipulate the $ru and $du as a result, but dont affect any
other multiple registrations that would be great!
Many thanks
Jon
Hi Guys,
I was wondering if anyone could help?
I am currently using reg_fetch_contacts to
manipulate signaling based on the user agent device
being used, therefore I use the result of;
if(reg_fetch_contacts("location", "$ru",
"callee"))
{
xlog("callee=>user_agent
$ulc(callee=>user_agent)\n");
}
I then use
$ulc(callee=>user_agent) to make routing
decisions.
This seems to only
return the user-agent device being used for the
first registration at that AOR, as I have two
devices registered, a Cisco, and a jitsi client, and
it only returns the user_agent of the jitsi client I
registered first.
Is it possible to
return the user agents of all the devices registered
against an AOR so I can manage decisions
accordingly?
Many thanks
Jon
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20140514/370f9625/attachment.html>
More information about the sr-users
mailing list