[SR-Users] SCA and PRESENCE
Jorj Bauer
jorj at isc.upenn.edu
Tue Jul 15 19:16:43 CEST 2014
Forgive me if this is daft - but what is your need for the Presence module?
It sounds like you're trying to enable two different technologies that do the same thing, since SCA already handles busy-lamps. I presume I'm just missing something.
-- Jorj
On Jul 14, 2014, at 3:57 PM, Joel White <joelewhite at gmail.com> wrote:
> I am enabling what was in the default config for WITH_PRESENCE
>
> When I enable WITH_PRESENCE, the Polycom phones do not show BLF
>
> Sure, I am using SPIP 335, SPIP 601 and 650, as well as VVX 1500 and SPIP 5000
>
> For the 601 I am running Legacy firmware 3.1.8 combined with a Bootrom of 3.1.3 rev D
>
> For the 335, 650, and 5000 I am running firmware version 3.2.6 Combined . I believe the Bootrom is 4.2.0
>
> I have not started to work on auto provisioning with the VVX 1500 and have been manually configuring them. I believe that they will work with the 3.2.6 firmware as well although I have seen many using 4.0.3 firmware with the newer VVX models
>
>
>
> Ask me anything and I will try to help :)
>
>
> On Thu, Jul 10, 2014 at 7:28 AM, João Vitor Arruda <joao.arruda at gmail.com> wrote:
> Hi Joel,
>
> When you say: "I enable presence modules" what you mean?
> Other than loading the module itself you may have included some code in kamailio.cfg using to handle the SUBSCRIBE messages for presence right?
>
> Without knowing your config, one thing that crossed my mind is:
> - Since both SCA and PRESENCE modules need to handle SUBSCRIBE messages you need to be sure that you do it first using the SCA function "sca_handle_subscribe()" just for the ones with Event header == "call-info" or == "line-seize". Then, for all the other SUBSCRIBE messages you can use the PRESENCE module function.
>
> There is an example of the code for filtering the ones to be handled by the SCA module function here:
> http://www.kamailio.org/docs/modules/devel/modules/sca.html#idp27944
>
> You too mention that the SCA works fine on your Polycom phones, since I´m too trying to use it but having some issues, I will appreciate if you can share (either here or by pvt message) some info like: which Polycom phone models and firmware version you are using.
>
> Regards,
> João Vitor Arruda
>
>
> 2014-07-08 13:26 GMT-03:00 Joel White <joelewhite at gmail.com>:
> I am having an issue where I enable presence modules and the SCA module stops working. I disable presence and SCA works fine on Polycom phones. Does anyone know what I am missing or doing wrong?
>
>
> Thank you in advance
>
> Joel
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
More information about the sr-users
mailing list