[SR-Users] question about nat_uac_test

[Klaus Darilion]

On 03.01.2014 16:59, Brian Davis wrote:
> REGISTER sip:test1.test.com:5060 <http://test1.test.com:5060> SIP/2.0
> Via: SIP/2.0/UDP 
> 96.xxx.xxx.xxx:33745;rport;branch=z9hG4bKf5s1p`n3TRv5TZx5RXy.RVv+JPz8Nat*UX!8KRx4SRx 
>
> Via: SIP/2.0/UDP 
> 192.xx.xxx.xxx:33745;branch=z9hG4bKeb263246c44095f072d8167dd0c7987a343134;rport 
>
> Contact: "Joe" <sip:xxxyyyzzzz at 192.xx.xxx.xxx:33745;transport=udp>

> Dec 30 03:33:45 sip-01 kamailio[20489]: INFO: <script>: 
> 3b0400ca43e28f78f3e6dc945a084b88 at 192.xx.xxx.xxx|log|source 
> 96.xxx.xxx.xxx:33745

Actually the source IP seem to be identical to the topmost Via address.

But it should detect the private IP address in the contact header.

Maybe you have an exception, that NAT traversal is not triggered, if 
there is more than 1 Via header.

Klaus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20140107/5a70a100/attachment.html>