[SR-Users] cnxcc

Carlos Ruiz Díaz carlos.ruizdiaz at gmail.com
Sat Apr 26 16:42:28 CEST 2014


Hi Andrzej,

are you trying to setup cnxcc to check both credit and maximum simultaneous
calls?

Regards,



On Sat, Apr 26, 2014 at 9:26 AM, Andrzej Ciupek
<andrzej.ciupek at hotmail.com>wrote:

>  Hello
>
> I’am using default config with options from an example. It looks like
> event route isn’t execuded after hangup.
>
> Apr 26 16:26:14 kamailio /usr/local/sbin/kamailio[4611]: INFO: <script>:
> 1000 has 1 call(s)
> Apr 26 16:26:15 kamailio /usr/local/sbin/kamailio[4611]: INFO: <script>:
> 1000 has 1 call(s)
> Apr 26 16:26:16 kamailio /usr/local/sbin/kamailio[4611]: INFO: <script>:
> 1000 has 1 call(s)
> Apr 26 16:26:17 kamailio /usr/local/sbin/kamailio[4611]: INFO: <script>:
> 1000 has 1 call(s)
> Apr 26 16:26:18 kamailio /usr/local/sbin/kamailio[4611]: INFO: <script>:
> 1000 has 1 call(s)
> Apr 26 16:26:19 kamailio /usr/local/sbin/kamailio[4611]: INFO: <script>:
> 1000 has 1 call(s)
> Apr 26 16:26:20 kamailio /usr/local/sbin/kamailio[4611]: INFO: <script>:
> 1000 has 1 call(s)
> Apr 26 16:26:20 kamailio /usr/local/sbin/kamailio[4604]: INFO: <script>:
> Setting up money based credit control
> Apr 26 16:26:20 kamailio /usr/local/sbin/kamailio[4604]: INFO: <script>:
> Setting up channel based credit control
> Apr 26 16:26:20 kamailio /usr/local/sbin/kamailio[4604]: INFO: <script>:
> CNXCC ROUTE: 1000 has 2 call(s)
>
> kamailio.cfg
>>> # ----- prepaid call controll -----
>
> #!define DLG_FLAG 28
> #!define CC_FLAG 29
>
> loadmodule "dialog.so"
>
> modparam("dialog", "hash_size", 2048)
> modparam("dialog", "default_timeout", 3600)
> modparam("dialog", "db_mode", 0)
> modparam("dialog", "dlg_flag", DLG_FLAG)
>
> modparam("rtimer", "timer", "name=ta;interval=1;mode=1;")
> modparam("rtimer", "exec", "timer=ta;route=SHOW_CHANNEL_COUNT")
>
> loadmodule "cnxcc.so"
>
> modparam("cnxcc", "dlg_flag", CC_FLAG)
> modparam("cnxcc", "credit_check_period", 1) #check every 1 second
>
>>>> route {
>>>  if (!allow_source_address("2") and !allow_source_address("1")){
>         route(CNXCC);
>         route(PSTN);
>         }
>> }
>
> route[CNXCC]
> {
>
>         $var(client)            = "1000";
>
>         xlog("L_INFO", "Setting up money based credit control");
>
>         $var(credit)            = "10"; # 10$ of credit
>         $var(cost_per_sec)      = "1";  # 1$ per sec
>         $var(i_pulse)           = "1";  # 1$ to establish the call
>         $var(f_pulse)           = "1";  # 1$ per second
>
>         # if only one call is established, that call should last 9 seconds.
>
>         if (!cnxcc_set_max_credit("$var(client)",
>                                   "$var(credit)",
>                                   "$var(cost_per_sec)",
>                                   "$var(i_pulse)",
>                                   "$var(f_pulse)")) {
>                 xlog("Error setting up credit control");
>                 return;
>         }
>         $var(count)     = -1;
>
>         if (!cnxcc_get_channel_count("$var(client)", "$var(count)")) {
>                 xlog("Error getting customer's channel count");
>         }
>
>         xlog("L_INFO", "CNXCC ROUTE: $var(client) has $var(count)
> call(s)");
>
>         if ($var(retcode) < -1) {
>                 xlog("Too many channels for customer");
>                 sl_send_reply(403, "Forbidden");
>
>                 if (!cnxcc_terminate_all("$var(client)")) {
>                         xlog("Error terminating customer's calls");
>                 } else {
>                         xlog("Terminating customer's call");
>                 }
>
>                 exit;
>         }
> }
>
> route[SHOW_CHANNEL_COUNT]
> {
>         $var(count) = @cnxcc.channels["1000"].count;
>         xlog("L_INFO", "1000 has $var(count) call(s)");
> }
>
> event_route[dialog:failed]
> {
>         xlog("dialog failed");
> }
>
> event_route[cnxcc:call-shutdown]
> {
>         xlog("L_INFO", "Shutting down channel by callcontroll");
>         xlog("L_INFO", "[$ci]: call killed");
>         $var(count)     = $var(count)-1;
>         if (!cnxcc_get_channel_count("$var(client)", "$var(count)")) {
>                 xlog("Error getting customer's channel count");
>         }
>         xlog("L_INFO", "CNXCC ROUTE: $var(client) has $var(count)
> call(s)");
>         # perform some kind of notification, database update, email
> sending, etc
> }
>
> Greetings
> Andrzej Ciupek
>
> *Od:* Carlos Ruiz Díaz <carlos.ruizdiaz at gmail.com>
> *Wysłano:* ‎sobota‎, ‎26‎ ‎kwietnia‎ ‎2014 ‎15‎:‎19
> *Do:* Kamailio (SER) - Users Mailing List <sr-users at lists.sip-router.org>,
> Andrzej Ciupek <andrzej.ciupek at hotmail.com>
>
> Hi,
>
> sorry guys, I forgot about this. I will make my own tests and post the
> results.
>
> Andrzej, can you post the configuration file you are using?
>
> Regards,
> Carlos
>
>
> On Sat, Apr 26, 2014 at 4:15 AM, Kelvin Chua <kelchy at gmail.com> wrote:
>
>> No, I have not yet found the solution for this issue on my setup.
>>
>> Maybe Carlos can help us out
>> On Apr 26, 2014 5:10 PM, "Andrzej Ciupek" <andrzej.ciupek at hotmail.com>
>> wrote:
>>
>>>   Hello
>>>
>>> Have You solved this issue ?
>>> I’am using Kamailio 4.1.3 and I’am getting the same results.
>>>
>>> Greetings
>>> Andrzej Ciupek
>>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
>
> --
> Carlos
> http://caruizdiaz.com
> http://ngvoice.com
> +52 55 3048 3303
>



-- 
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20140426/a35c9832/attachment.html>


More information about the sr-users mailing list