[SR-Users] Kamailio 3.1.x and FreeSWITCH 1.0.6+ for Media Services and SBC Author: Daniel-Constantin Mierla

Carlton Thompson thompsoc83 at gmail.com
Sat May 18 21:10:35 CEST 2013


http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc#dokuwiki__top

Hello I was trying to use your tutorial on the above page. I am trying to
do so using PGQL vs MYSQL. I changed all the mysql parts to pgsql however
when i try to start kamailio it fails. I am building the system on alpine
linux and attached my kamailio.cfg and kamctlrc. i am able to setup using
the default config making necessary changes but when i use yours it fails.
Any help would be appreciated.
-- 
Regards,
Carlton Thompson, MS
Doctoral Student
College of Engineering
University of Florida
Gainesville, FL 32611
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20130518/904a2c57/attachment-0001.html>
-------------- next part --------------
#!KAMAILIO
 
#!define WITH_PGSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#!define WITH_FREESWITCH
 
#
# Kamailio (OpenSER) SIP Server v3.1 - default configuration script
#     - web: http://www.kamailio.org
#     - git: http://sip-router.org
#
# Direct your questions about this file to: 
<sr-users at lists.sip-router.org>
#
# Refer to the Core CookBook at 
http://www.kamailio.org/dokuwiki/doku.php
# for an explanation of possible statements, functions and parameters.
#
# Several features can be enabled using '#!define WITH_FEATURE' 
directives:
#
# *** To run in debug mode: 
#     - define WITH_DEBUG
#
# *** To enable pgsql: 
#     - define WITH_PGSQL
#
# *** To enable authentication execute:
#     - enable pgsql
#     - define WITH_AUTH
#     - add users using 'kamctl'
#
# *** To enable IP authentication execute:
#     - enable pgsql
#     - enable authentication
#     - define WITH_IPAUTH
#     - add IP addresses with group id '1' to 'address' table
#
# *** To enable persistent user location execute:
#     - enable pgsql
#     - define WITH_USRLOCDB
#
# *** To enable presence server execute:
#     - enable pgsql
#     - define WITH_PRESENCE
#
# *** To enable nat traversal execute:
#     - define WITH_NAT
#     - install RTPProxy: http://www.rtpproxy.org
#     - start RTPProxy:
#        rtpproxy -l _your_public_ip_ -s udp:localhost:7722
#
# *** To enable PSTN gateway routing execute:
#     - define WITH_PSTN
#     - set the value of pstn.gw_ip
#     - check route[PSTN] for regexp routing condition
#
# *** To enable database aliases lookup execute:
#     - enable pgsql
#     - define WITH_ALIASDB
#
# *** To enable multi-domain support execute:
#     - enable pgsql
#     - define WITH_MULTIDOMAIN
#
# *** To enable TLS support execute:
#     - adjust CFGDIR/tls.cfg as needed
#     - define WITH_TLS
#
# *** To enable XMLRPC support execute:
#     - define WITH_XMLRPC
#     - adjust route[XMLRPC] for access policy
#
# *** To enable anti-flood detection execute:
#     - adjust pike and htable=>ipban settings as needed (default is
#       block if more than 16 requests in 2 seconds and ban for 300 
seconds)
#     - define WITH_ANTIFLOOD
#
# *** To enhance accounting execute:
#     - enable pgsql
#     - define WITH_ACCDB
#     - add following columns to database
#!ifdef ACCDB_COMMENT
  ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT 
'';
  ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT 
'';
  ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL 
DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL 
DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL 
DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL 
DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL 
DEFAULT '';
#!endif
 
####### Defined Values #########
 
# *** Value defines - IDs used later in config
#!ifdef WITH_PGSQL
# - database URL - used to connect to database server by modules such
#       as: auth_db, acc, usrloc, a.s.o.
#!define DBURL "pgsql://openser:openserrw@localhost/openser"
#!endif
#!ifdef WITH_MULTIDOMAIN
# - the value for 'use_domain' parameters
#!define MULTIDOMAIN 1
#!else
#!define MULTIDOMAIN 0
#!endif
 
# - flags
#   FLT_ - per transaction (message) flags
#	FLB_ - per branch flags
#!define FLT_ACC 1
#!define FLT_ACCMISSED 2
#!define FLT_ACCFAILED 3
#!define FLT_NATS 5
 
#!define FLB_NATB 6
#!define FLB_NATSIPPING 7
 
####### Global Parameters #########
 
#!ifdef WITH_DEBUG
debug=4
log_stderror=yes
#!else
debug=2
log_stderror=no
#!endif
 
memdbg=5
memlog=5
 
log_facility=LOG_LOCAL0
 
fork=yes
children=4
 
/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes
 
/* uncomment the next line to disable the auto discovery of local 
aliases
   based on reverse DNS on IPs (default on) */
#auto_aliases=no
 
/* add local domain aliases */
#alias="sip.mydomain.com"
 
/* uncomment and configure the following line if you want Kamailio to 
   bind on a specific interface/port/proto (default bind on all 
available) */
listen=udp:10.0.0.10:5060
 
/* port to listen to
 * - can be specified more than once if needed to listen on many ports 
*/
port=5060
 
#!ifdef WITH_TLS
enable_tls=yes
#!endif
 
####### Custom Parameters #########
 
# These parameters can be modified runtime via RPC interface
# - see the documentation of 'cfg_rpc' module.
#
# Format: group.id = value 'desc' description
# Access: $sel(cfg_get.group.id) or @cfg_get.group.id
#
 
#!ifdef WITH_PSTN
# PSTN GW Routing
#
# - pstn.gw_ip: valid IP or hostname as string value, example:
# pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
#
# - by default is empty to avoid misrouting
pstn.gw_ip = "10.0.0.1" desc "PSTN GW Address"
#!endif
 
#!ifdef WITH_FREESWITCH
freeswitch.bindip = "10.0.0.101" desc "FreeSWITCH IP Address"
freeswitch.bindport = "5060" desc "FreeSWITCH Port"
#!endif
 
 
####### Modules Section ########
 
# set paths to location of modules
#!ifdef LOCAL_TEST_RUN
mpath="modules_k:modules"
#!else
mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/"
#!endif
 
#!ifdef WITH_PGSQL
loadmodule "db_postgres.so"
#!endif
 
loadmodule "mi_fifo.so"
loadmodule "kex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "mi_rpc.so"
loadmodule "acc.so"
loadmodule "uac.so"
 
#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH
loadmodule "permissions.so"
#!endif
#!endif
 
#!ifdef WITH_ALIASDB
loadmodule "alias_db.so"
#!endif
 
#!ifdef WITH_MULTIDOMAIN
loadmodule "domain.so"
#!endif
 
#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
#!endif
 
#!ifdef WITH_NAT
loadmodule "nathelper.so"
loadmodule "rtpproxy.so"
#!endif
 
#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif
 
#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"
loadmodule "pike.so"
#!endif
 
#!ifdef WITH_XMLRPC
loadmodule "xmlrpc.so"
#!endif
 
# ----------------- setting module-specific parameters ---------------
 
 
# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")
 
 
# ----- tm params -----
# auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3)
# default retransmission timeout: 30sec
modparam("tm", "fr_timer", 30000)
# default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 120000)
 
 
# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)
 
 
# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
 
 
# ----- acc params -----
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra", 
	
"src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/* enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)
modparam("acc", "db_extra",
	
"src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
#!endif
 
 
# ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
#!endif
 
 
# ----- auth_db params -----
#!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "")
modparam("auth_db", "use_domain", MULTIDOMAIN)
 
# ----- permissions params -----
#!ifdef WITH_IPAUTH
modparam("permissions", "db_url", DBURL)
modparam("permissions", "db_mode", 1)
#!endif
 
#!endif
 
 
# ----- alias_db params -----
#!ifdef WITH_ALIASDB
modparam("alias_db", "db_url", DBURL)
modparam("alias_db", "use_domain", MULTIDOMAIN)
#!endif
 
 
# ----- domain params -----
#!ifdef WITH_MULTIDOMAIN
modparam("domain", "db_url", DBURL)
# use caching
modparam("domain", "db_mode", 1)
# register callback to match myself condition with domains list
modparam("domain", "register_myself", 1)
#!endif
 
 
#!ifdef WITH_PRESENCE
# ----- presence params -----
modparam("presence", "db_url", DBURL)
 
# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
#!endif
 
 
#!ifdef WITH_NAT
# ----- rtpproxy params -----
modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")
 
# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from", "sip:pinger at kamailio.org")
 
# params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif
 
 
#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg")
#!endif
 
#!ifdef WITH_ANTIFLOOD
# ----- pike params -----
modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)
modparam("pike", "remove_latency", 4)
 
# ----- htable params -----
# ip ban htable with autoexpire after 5 minutes
modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")
#!endif
 
#!ifdef WITH_XMLRPC
# ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPC")
#!endif
 
####### Routing Logic ########
 
 
# Main SIP request routing logic
# - processing of any incoming SIP request starts with this route
route {
 
	# per request initial checks
	route(REQINIT);
 
	# NAT detection
	route(NAT);
 
	# handle requests within SIP dialogs
	route(WITHINDLG);
 
	### only initial requests (no To tag)
 
	# CANCEL processing
	if (is_method("CANCEL"))
	{
		if (t_check_trans())
			t_relay();
		exit;
	}
 
	t_check_trans();
 
	# authentication
	route(AUTH);
 
	# record routing for dialog forming requests (in case they are 
routed)
	# - remove preloaded route headers
	remove_hf("Route");
	if (is_method("INVITE|SUBSCRIBE"))
		record_route();
 
	# account only INVITEs
	if (is_method("INVITE"))
	{
		setflag(FLT_ACC); # do accounting
	}
 
	# dispatch requests to foreign domains
	route(SIPOUT);
 
	### requests for my local domains
 
	# handle presence related requests
	route(PRESENCE);
 
	# handle registrations
	route(REGISTRAR);
 
	if ($rU==$null)
	{
		# request with no Username in RURI
		sl_send_reply("484","Address Incomplete");
		exit;
	}
 
	# dispatch destinations to PSTN
	route(PSTN);
 
	#!ifdef WITH_FREESWITCH
	# save callee ID
	$avp(callee) = $rU;
	route(FSDISPATCH);
	#!endif
 
	# user location service
	route(LOCATION);
 
	route(RELAY);
}
 
 
route[RELAY] {
#!ifdef WITH_NAT
	if (check_route_param("nat=yes")) {
		setbflag(FLB_NATB);
	}
	if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) {
		route(RTPPROXY);
	}
#!endif
 
#!ifdef WITH_CFGSAMPLES
	/* example how to enable some additional event routes */
	if (is_method("INVITE")) {
		#t_on_branch("BRANCH_ONE");
		t_on_reply("REPLY_ONE");
		t_on_failure("FAIL_ONE");
	}
#!endif
 
	if (!t_relay()) {
		sl_reply_error();
	}
	exit;
}
 
# Per SIP request initial checks
route[REQINIT] {
#!ifdef WITH_ANTIFLOOD
	# flood dection from same IP and traffic ban for a while
	# be sure you exclude checking trusted peers, such as pstn 
gateways
	# - local host excluded (e.g., loop to self)
	if(src_ip!=myself)
	{
		if($sht(ipban=>$si)!=$null)
		{
			# ip is already blocked
			xdbg("request from blocked IP - $rm from $fu 
(IP:$si:$sp)\n");
			exit;
		}
		if (!pike_check_req())
		{
			xlog("L_ALERT","ALERT: pike blocking $rm from 
$fu (IP:$si:$sp)\n");
			$sht(ipban=>$si) = 1;
			exit;
		}
	}
#!endif
 
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		exit;
	}
 
	if(!sanity_check("1511", "7"))
	{
		xlog("Malformed SIP message from $si:$sp\n");
		exit;
	}
}
 
# Handle requests within SIP dialogs
route[WITHINDLG] {
	if (has_totag()) {
		# sequential request withing a dialog should
		# take the path determined by record-routing
		if (loose_route()) {
			if (is_method("BYE")) {
				setflag(FLT_ACC); # do accounting ...
				setflag(FLT_ACCFAILED); # ... even if 
the transaction fails
			}
			route(RELAY);
		} else {
			if (is_method("SUBSCRIBE") && uri == myself) {
				# in-dialog subscribe requests
				route(PRESENCE);
				exit;
			}
			if ( is_method("ACK") ) {
				if ( t_check_trans() ) {
					# no loose-route, but stateful 
ACK;
					# must be an ACK after a 487
					# or e.g. 404 from upstream 
server
					t_relay();
					exit;
				} else {
					# ACK without matching 
transaction ... ignore and discard
					exit;
				}
			}
			sl_send_reply("404","Not here");
		}
		exit;
	}
}
 
# Handle SIP registrations
route[REGISTRAR] {
	if (is_method("REGISTER"))
	{
		if(isflagset(FLT_NATS))
		{
			setbflag(FLB_NATB);
			# uncomment next line to do SIP NAT pinging 
			## setbflag(FLB_NATSIPPING);
		}
		if (!save("location"))
			sl_reply_error();
 
		exit;
	}
}
 
# USER location service
route[LOCATION] {
 
#!ifdef WITH_ALIASDB
	# search in DB-based aliases
	alias_db_lookup("dbaliases");
#!endif
 
	if (!lookup("location")) {
		switch ($rc) {
			case -1:
			case -3:
				t_newtran();
				t_reply("404", "Not Found");
				exit;
			case -2:
				sl_send_reply("405", "Method Not 
Allowed");
				exit;
		}
	}
 
	# when routing via usrloc, log the missed calls also
	if (is_method("INVITE"))
	{
		setflag(FLT_ACCMISSED);
	}
}
 
# Presence server route
route[PRESENCE] {
	if(!is_method("PUBLISH|SUBSCRIBE"))
		return;
 
#!ifdef WITH_PRESENCE
	if (!t_newtran())
	{
		sl_reply_error();
		exit;
	};
 
	if(is_method("PUBLISH"))
	{
		handle_publish();
		t_release();
	}
	else
	if( is_method("SUBSCRIBE"))
	{
		handle_subscribe();
		t_release();
	}
	exit;
#!endif
 
	# if presence enabled, this part will not be executed
	if (is_method("PUBLISH") || $rU==$null)
	{
		sl_send_reply("404", "Not here");
		exit;
	}
	return;
}
 
# Authentication route
route[AUTH] {
#!ifdef WITH_AUTH
	if (is_method("REGISTER"))
	{
		# authenticate the REGISTER requests (uncomment to 
enable auth)
		if (!www_authorize("$td", "subscriber"))
		{
			www_challenge("$td", "0");
			exit;
		}
 
		if ($au!=$tU)
		{
			sl_send_reply("403","Forbidden auth ID");
			exit;
		}
	} else {
 
#!ifdef WITH_FREESWITCH
	if(route(FSINBOUND))
		return;
#!endif
 
#!ifdef WITH_IPAUTH
		if(allow_source_address())
		{
			# source IP allowed
			return;
		}
#!endif
 
		# authenticate if from local subscriber
		if (from_uri==myself)
		{
			if (!proxy_authorize("$fd", "subscriber")) {
				proxy_challenge("$fd", "0");
				exit;
			}
			if (is_method("PUBLISH"))
			{
				if ($au!=$tU) {
					sl_send_reply("403","Forbidden 
auth ID");
					exit;
				}
			} else {
				if ($au!=$fU) {
					sl_send_reply("403","Forbidden 
auth ID");
					exit;
				}
			}
 
			consume_credentials();
			# caller authenticated
		} else {
			# caller is not local subscriber, then check if 
it calls
			# a local destination, otherwise deny, not an 
open relay here
			if (!uri==myself)
			{
				sl_send_reply("403","Not relaying");
				exit;
			}
		}
	}
#!endif
	return;
}
 
# Caller NAT detection route
route[NAT] {
#!ifdef WITH_NAT
	force_rport();
	if (nat_uac_test("19")) {
		if (method=="REGISTER") {
			fix_nated_register();
		} else {
			fix_nated_contact();
		}
		setflag(FLT_NATS);
	}
#!endif
	return;
}
 
# RTPProxy control
route[RTPPROXY] {
#!ifdef WITH_NAT
	if (is_method("BYE")) {
		unforce_rtp_proxy();
	} else if (is_method("INVITE")){
		force_rtp_proxy();
	}
	if (!has_totag()) add_rr_param(";nat=yes");
#!endif
	return;
}
 
# Routing to foreign domains
route[SIPOUT] {
	if (!uri==myself)
	{
		append_hf("P-hint: outbound\r\n");
		route(RELAY);
	}
}
 
# PSTN GW routing
route[PSTN] {
#!ifdef WITH_PSTN
	# check if PSTN GW IP is defined
	if (strempty($sel(cfg_get.pstn.gw_ip))) {
		xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not 
defined\n");
		return;
	}
 
	# route to PSTN dialed numbers starting with '+' or '00'
	#     (international format)
	# - update the condition to match your dialing rules for PSTN 
routing
	if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$"))
		return;
 
	# only local users allowed to call
	if(from_uri!=myself) {
		sl_send_reply("403", "Not Allowed");
		exit;
	}
 
	$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);
 
	route(RELAY);
	exit;
#!endif
 
	return;
}
 
# XMLRPC routing
#!ifdef WITH_XMLRPC
route[XMLRPC]
{
	# allow XMLRPC from localhost
	if ((method=="POST" || method=="GET")
			&& (src_ip==127.0.0.1)) {
		# close connection only for xmlrpclib user agents (there 
is a bug in
		# xmlrpclib: it waits for EOF before interpreting the 
response).
		if ($hdr(User-Agent) =~ "xmlrpclib")
			set_reply_close();
		set_reply_no_connect();
		dispatch_rpc();
		exit;
	}
	send_reply("403", "Forbidden");
	exit;
}
#!endif
 
#!ifdef WITH_FREESWITCH
# FreeSWITCH routing blocks
route[FSINBOUND] {
	if($si== $sel(cfg_get.freeswitch.bindip)
			&& $sp==$sel(cfg_get.freeswitch.bindport))
		return 1;
	return -1;
}
 
route[FSDISPATCH] {
	if(!is_method("INVITE"))
		return;
	if(route(FSINBOUND))
		return;
 
	# dial number selection
	switch($rU) {
		case /"^41$":
			# 41 - voicebox menu
			# allow only authenticated users
			if($au==$null)
			{
				sl_send_reply("403", "Not allowed");
				exit;
			}
			$rU = "vm-" + $au;
		break;
		case /"^441[0-9][0-9]$":
			# starting with 44 folowed by 1XY - direct call 
to voice box
			strip(2);
			route(FSVBOX);
		break;
		case /"^433[01][0-9][0-9]$":
			# starting with 433 folowed by (0|1)XY - 
conference
			strip(2);
		break;
		case /"^45[0-9]+$":
			strip(2);
		break;
		default:
			# offline - send to voicebox
			if (!registered("location"))
			{
				route(FSVBOX);
				exit;
			}
			# online - do bridging
			prefix("kb-");
			if(is_method("INVITE"))
			{
				# in case of failure - re-route to 
FreeSWITCH VoiceMail
				t_on_failure("FAIL_FSVBOX");
			}
	}
	route(FSRELAY);
	exit;
}
 
route[FSVBOX] {
	if(!($rU=~"^1[0-9][0-9]+$"))
		return;
	prefix("vb-");
	route(FSRELAY);
}
 
# Send to FreeSWITCH
route[FSRELAY] {
	$du = "sip:" + $sel(cfg_get.freeswitch.bindip) + ":"
			+ $sel(cfg_get.freeswitch.bindport);
	if($var(newbranch)==1)
	{
		append_branch();
		$var(newbranch) = 0;
	}
	route(RELAY);
	exit;
}
 
#!endif
 
# Sample branch router
branch_route[BRANCH_ONE] {
	xdbg("new branch at $ru\n");
}
 
# Sample onreply route
onreply_route[REPLY_ONE] {
	xdbg("incoming reply\n");
#!ifdef WITH_NAT
	if ((isflagset(FLT_NATS) || isbflagset(FLB_NATB))
			&& status=~"(183)|(2[0-9][0-9])") {
		force_rtp_proxy();
	}
	if (isbflagset("6")) {
		fix_nated_contact();
	}
#!endif
}
 
# Sample failure route
failure_route[FAIL_ONE] {
#!ifdef WITH_NAT
	if (is_method("INVITE")
			&& (isbflagset(FLB_NATB) || 
isflagset(FLT_NATS))) {
		unforce_rtp_proxy();
	}
#!endif
 
	if (t_is_canceled()) {
		exit;
	}
 
	# uncomment the following lines if you want to block client 
	# redirect based on 3xx replies.
	##if (t_check_status("3[0-9][0-9]")) {
	##t_reply("404","Not found");
	##	exit;
	##}
 
	# uncomment the following lines if you want to redirect the 
failed 
	# calls to a different new destination
	##if (t_check_status("486|408")) {
	##	sethostport("10.0.0.100:5060");
	##	append_branch();
	##	# do not set the missed call flag again
	##	t_relay();
	##}
}
 
#!ifdef WITH_FREESWITCH
failure_route[FAIL_FSVBOX] {
#!ifdef WITH_NAT
	if (is_method("INVITE")
			&& (isbflagset(FLB_NATB) || 
isflagset(FLT_NATS))) {
		unforce_rtp_proxy();
	}
#!endif
 
	if (t_is_canceled()) {
		exit;
	}
 
	if (t_check_status("486|408")) {
		# re-route to FreeSWITCH VoiceMail
		$rU = $avp(callee);
		$var(newbranch) = 1;
		route(FSVBOX);
	}
}
#!endif
-------------- next part --------------
# $Id$
#
# The Kamailio configuration file for the control tools.
#
# Here you can set variables used in the kamctl and kamdbctl setup
# scripts. Per default all variables here are commented out, the control tools
# will use their internal default values.

## your SIP domain
SIP_DOMAIN=10.0.0.100

## chrooted directory
# $CHROOT_DIR="/path/to/chrooted/directory"

## database type: MYSQL, PGSQL, ORACLE, DB_BERKELEY, or DBTEXT, by default none is loaded
# If you want to setup a database with kamdbctl, you must at least specify
# this parameter.
DBENGINE=PGSQL

## database host
DBHOST=localhost

## database name (for ORACLE this is TNS name)
DBNAME=openser

# database path used by dbtext or db_berkeley
# DB_PATH="/usr/local/etc/kamailio/dbtext"

## database read/write user
DBRWUSER=openser

## password for database read/write user
DBRWPW="openserrw"

## database read only user
DBROUSER=openserro

## password for database read only user
DBROPW=openserro

## database super user (for ORACLE this is 'scheme-creator' user)
DBROOTUSER="postgres"

# user name column
# USERCOL="username"


# SQL definitions
# If you change this definitions here, then you must change them 
# in db/schema/entities.xml too.
# FIXME

# FOREVER="2020-05-28 21:32:15"
# DEFAULT_ALIASES_EXPIRES=$FOREVER
# DEFAULT_Q="1.0"
# DEFAULT_CALLID="Default-Call-ID"
# DEFAULT_CSEQ="13"
# DEFAULT_LOCATION_EXPIRES=$FOREVER


# Program to calculate a message-digest fingerprint 
# MD5="md5sum"

# awk tool
# AWK="awk"

# If you use a system with a grep and egrep that is not 100% gnu grep compatible,
# e.g. solaris, install the gnu grep (ggrep) and specify this below.
#
# grep tool
# GREP="grep"

# egrep tool
# EGREP="egrep"

# sed tool
# SED="sed"

# tail tool
# LAST_LINE="tail -n 1"

# expr tool
# EXPR="expr"


# Describe what additional tables to install. Valid values for the variables
# below are yes/no/ask. With ask (default) it will interactively ask the user
# for an answer, while yes/no allow for automated, unassisted installs.
#

# If to install tables for the modules in the EXTRA_MODULES variable.
# INSTALL_EXTRA_TABLES=ask

# If to install presence related tables.
# INSTALL_PRESENCE_TABLES=ask

# Define what module tables should be installed.
# If you use the postgres database and want to change the installed tables, then you
# must also adjust the STANDARD_TABLES or EXTRA_TABLES variable accordingly in the
# kamdbctl.base script.

# Kamailio standard modules
# STANDARD_MODULES="standard acc lcr domain group permissions registrar usrloc msilo
#                   alias_db uri_db speeddial avpops auth_db pdt dialog dispatcher
#                   dialplan"

# Kamailio extra modules
# EXTRA_MODULES="imc cpl siptrace domainpolicy carrierroute userblacklist htable purple"


## type of aliases used: DB - database aliases; UL - usrloc aliases
## - default: none
# ALIASES_TYPE="DB"

## control engine: FIFO or UNIXSOCK
## - default FIFO
# CTLENGINE="FIFO"

## path to FIFO file
# OSER_FIFO="FIFO"

## check ACL names; default on (1); off (0)
# VERIFY_ACL=1

## ACL names - if VERIFY_ACL is set, only the ACL names from below list
## are accepted
# ACL_GROUPS="local ld int voicemail free-pstn"

## verbose - debug purposes - default '0'
# VERBOSE=1

## do (1) or don't (0) store plaintext passwords
## in the subscriber table - default '1'
# STORE_PLAINTEXT_PW=0

## OPENSER START Options
## PID file path - default is: /var/run/kamailio/kamailio.pid
# PID_FILE=/var/run/kamailio/kamailio.pid

## Extra start options - default is: not set
# example: start Kamailio with 64MB share memory: STARTOPTIONS="-m 64"
# STARTOPTIONS=


More information about the sr-users mailing list