[SR-Users] Outbound Calls using pstn.gw_ip

[Barthel Marco (CI/AFU1)]

Hi Rajah,
setting pstn.gw to "1.2.3.4;transport=tcp" should help. If you need to use some other port this should help "1.2.3.4:5080;transport=tcp"

Mit freundlichen Grüßen / Best regards

Marco Barthel

Robert Bosch GmbH
(CI/AFU1)
Postfach 30 02 20
70442 Stuttgart
GERMANY
www.bosch.com<http://www.bosch.com>


Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart, HRB 14000;
Aufsichtsratsvorsitzender: Franz Fehrenbach; Geschäftsführung: Dr. Volkmar Denner,
Dr. Stefan Asenkerschbaumer, Dr. Rolf Bulander, Dr. Stefan Hartung, Dr. Dirk Hoheisel, Christoph Kübel,
Uwe Raschke, Wolf-Henning Scheider, Dr. Werner Struth, Peter Tyroller
Von: sr-users-bounces at lists.sip-router.org [mailto:sr-users-bounces at lists.sip-router.org] Im Auftrag von Rajah Chowbay
Gesendet: Sonntag, 15. Dezember 2013 01:06
An: sr-users at lists.sip-router.org
Betreff: [SR-Users] Outbound Calls using pstn.gw_ip

Setup:

jitsi --> kamailio <-----> pstn.gw<http://pstn.gw/>

jitsi is registered using TCP
SIP Trunk between kamailio and pstn.gw<http://pstn.gw/> is using TCP

Initial invite from jitsi to kamailio is sent using TCP but invite sent  from kamailio to pstn.gw<http://pstn.gw/> is being sent with UDP.

How can I configure kamailio to send invite to pstn.gw<http://pstn.gw/> with TCP?

Thank You
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20131216/f65d8441/attachment.html>