[SR-Users] 500 I'm terribly sorry error
Helena Garcia-Nieto
helena.gnieto at morodo.co.uk
Wed Dec 11 10:51:22 CET 2013
Hey,
Yes.
Dec 11 08:55:45 server77-68-57-68 /usr/local/sbin/kamailio[13233]: ERROR:
<script>: r-uri (sip:XXXXX771269 at 202.68.XX.XX:5060) to me it looks ok
That is the printing when using the route (pstn) on the routing logic and
only adding the xlog on the default route[PSTN]
With the full config (attached)
That is the trace just before entering the route (ISKRATEL)
Dec 11 09:25:39 /usr/local/sbin/kamailio[15793]: ERROR: <script>: Helena
r-uri ( <sip:XXX771269 at 77.XX.XX.XX:7060;transport=tcp>
sip:XXX771269 at 77.XX.XX.XX:7060;transport=tcp)
I was not able to get the other printings, and I’m not sure why
since I
have the route [ISKRATEL] like:
route[ISKRATEL] {
xlog("L_ERR", "Helena 0 r-uri ($ru) \n");
#!ifdef WITH_PSTN
# check if ISKRATEL GW IP is defined
xlog("L_ERR", "Helena 1 r-uri ($ru) \n");
if (strempty($sel(cfg_get.iskratel.gw_ip))) {
xlog("SCRIPT: PSTN rotuing enabled but iskratel.gw_ip not
defined\n");
return;
}
xlog("L_ERR", "Helena 2 r-uri ($ru) \n");
# only local users allowed to call
if(from_uri!=myself) {
sl_send_reply("403", "Not Allowed");
exit;
}
xlog("L_ERR", "Helena 3 r-uri ($ru) \n");
if (strempty($sel(cfg_get.iskratel.gw_port))) {
$ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip);
} else {
$ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip) +
":"+ $sel(cfg_get.iskratel.gw_port);
xlog("L_ERR", "Helena 4 r-uri ($ru) \n");
}
xlog("L_ERR", "Helena 5 r-uri ($ru) \n");
#MORODO Add profix to ISKRATEL: A99901
subst_uri('/^sip:(.*)/sip:A99901\1/i'); # add A99901
#MORODO TEST
xlog("L_ERR", "Helena r-uri ($ru) \n");
route(RELAY);
exit;
#!endif
return;
}
I attach the kamailio conf file, in case you can see something on it. Can
you advise me on why I’m not getting the xlogs inside the function? And
where can be the problem with the 500 I’m terrible sorry?
Thanks in advanced!
Helena
From: Daniel-Constantin Mierla [mailto:miconda at gmail.com]
Sent: miércoles, 11 de diciembre de 2013 8:39
To: Helena Garcia-Nieto; 'Kamailio (SER) - Users Mailing List'
Subject: Re: [SR-Users] 500 I'm terribly sorry error
I already told to pring the $ru, have you done it?
Daniel
On 10/12/13 17:09, Helena Garcia-Nieto wrote:
Hi Daniel,
Thanks for the answer but
I already tested if the problem is there and even commenting the prefix out
the error is exactly the same.
That is why I test it using:
pstn.gw_ip = "10.XX.XX.XX"
pstn.gw_port = "5060"
And route(PSTN)
Without changing original PSTN routing.
I’m getting the same problem.
Could you think on something else that can be affecting that?
Helena
From: sr-users-bounces at lists.sip-router.org
[mailto:sr-users-bounces at lists.sip-router.org] On Behalf Of
Daniel-Constantin Mierla
Sent: martes, 10 de diciembre de 2013 16:54
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] 500 I'm terribly sorry error
Hello,
I guess the r-uri is not correct after your changes. you can try to print
$ru with xlog(...) just before the route(RELAY).
You should use string operation to add the prefix instead of using a regular
expression substitution, like:
prefix("A99901");
or
$rU = "A99901" + $rU;
Cheers,
Daniel
On 10/12/13 16:19, Helena Garcia-Nieto wrote:
Hello,
Thanks in advanced for the help. I am almost new with kamailio and still
struggling through silly problems so please forgive me if the solution is so
obvious.
I have a network like
Xlitle -- Kamailio -- GW
The GW is more or less out of my reach for changing the behaivour.
As devices I have xlitle
Kamailio is on version 4.0.2
I’ve changed only few things from the default config file. Add mysql
support, auth, userlocdb, pstngw.
For this part, gw routing , I’ve defined gw ip and port inside the PSTN
definition like:
#!ifdef WITH_PSTN
# PSTN GW Routing
#
# - pstn.gw_ip: valid IP or hostname as string value, example:
# pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
#
# - by default is empty to avoid misrouting
pstn.gw_ip = "" desc "PSTN GW Address"
pstn.gw_port = "" desc "PSTN GW Port"
iskratel.gw_ip = "10.XX.XX.XX"
iskratel.gw_port = "5060"
#!endif
I route the calls with:
route(ISKRATEL);
And defined a routing function
route[ISKRATEL] {
#!ifdef WITH_PSTN
# check if ISKRATEL GW IP is defined
if (strempty($sel(cfg_get.iskratel.gw_ip))) {
xlog("SCRIPT: PSTN rotuing enabled but iskratel.gw_ip not
defined\n");
return;
}
# only local users allowed to call
if(from_uri!=myself) {
sl_send_reply("403", "Not Allowed");
exit;
}
if (strempty($sel(cfg_get.iskratel.gw_port))) {
$ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip);
} else {
$ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip) +
":"
+ $sel(cfg_get.iskratel.gw_port);
}
# Add profix to ISKRATEL: A99901
subst_uri('/^sip:(.*)/sip:A99901\1/i')
<sip:%28.*%29/sip:A99901%5C1/i%27%29> ; # add A99901
route(RELAY);
exit;
#!endif
return;
}
I can see that the code goes all the way to the route(relay) but all I can
see is the 500 I’m terribly sorry, server error occurred (7/SL) and a second
response 500 I’m terribly sorry, server error occurred (7/TM)
I’ve tried defining the IP as the given pstn.gw_ip and route(pstn) without
changing anything on the pst default routing but the response of the server
is the same.
I cannot see any special error on the logs.
I have the exact same config for this part, in another test server and the
calls go to the gw without reporting any error.
I’ll appreciate any help from you! Thanks in advanced for your time
Helena
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -
http://www.linkedin.com/in/miconda
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20131211/1b73869f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: kamailio_500error.cfg
Type: application/octet-stream
Size: 29094 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20131211/1b73869f/attachment-0001.obj>
More information about the sr-users
mailing list