[SR-Users] 500 I'm terribly sorry error
Daniel-Constantin Mierla
miconda at gmail.com
Wed Dec 11 11:06:45 CET 2013
Hello,
can you set debug=3 in your config file and look at the logs for more
information on why is failing?
To discover why a route block is not executed, you can use debugger
module with cfgtrace parameter set to 1, then you will see what lines of
configuration files are executed and spot what condition didn't evaluate
as expected to get to the respective routing block.
Cheers,
Daniel
On 11/12/13 10:51, Helena Garcia-Nieto wrote:
>
> Hey,
>
> Yes.
>
> Dec 11 08:55:45 server77-68-57-68 /usr/local/sbin/kamailio[13233]:
> ERROR: <script>: r-uri (sip:XXXXX771269 at 202.68.XX.XX:5060) to me it
> looks ok
>
> That is the printing when using the route (pstn) on the routing logic
> and only adding the xlog on the default route[PSTN]
>
> With the full config (attached)
>
> That is the trace just before entering the route (ISKRATEL)
>
> Dec 11 09:25:39 /usr/local/sbin/kamailio[15793]: ERROR: <script>:
> Helena r-uri (sip:XXX771269 at 77.XX.XX.XX:7060;transport=tcp)
>
> I was not able to get the other printings, and I'm not sure why...
> since I have the route [ISKRATEL] like:
>
> route[ISKRATEL] {
>
> xlog("L_ERR", "Helena 0 r-uri ($ru) \n");
>
> #!ifdef WITH_PSTN
>
> # check if ISKRATEL GW IP is defined
>
> xlog("L_ERR", "Helena 1 r-uri ($ru) \n");
>
> if (strempty($sel(cfg_get.iskratel.gw_ip))) {
>
> xlog("SCRIPT: PSTN rotuing enabled but iskratel.gw_ip
> not defined\n");
>
> return;
>
> }
>
> xlog("L_ERR", "Helena 2 r-uri ($ru) \n");
>
> # only local users allowed to call
>
> if(from_uri!=myself) {
>
> sl_send_reply("403", "Not Allowed");
>
> exit;
>
> }
>
> xlog("L_ERR", "Helena 3 r-uri ($ru) \n");
>
> if (strempty($sel(cfg_get.iskratel.gw_port))) {
>
> $ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip);
>
> } else {
>
> $ru = "sip:" + $rU + "@" +
> $sel(cfg_get.iskratel.gw_ip) + ":"+ $sel(cfg_get.iskratel.gw_port);
>
> xlog("L_ERR", "Helena 4 r-uri ($ru) \n");
>
> }
>
> xlog("L_ERR", "Helena 5 r-uri ($ru) \n");
>
> #MORODO Add profix to ISKRATEL: A99901
>
> subst_uri('/^sip:(.*)/sip:A99901\1/i'); # add A99901
>
> #MORODO TEST
>
> xlog("L_ERR", "Helena r-uri ($ru) \n");
>
> route(RELAY);
>
> exit;
>
> #!endif
>
> return;
>
> }
>
> I attach the kamailio conf file, in case you can see something on it.
> Can you advise me on why I'm not getting the xlogs inside the
> function? And where can be the problem with the 500 I'm terrible sorry?
>
> Thanks in advanced!
>
> Helena
>
> *From:*Daniel-Constantin Mierla [mailto:miconda at gmail.com]
> *Sent:* miércoles, 11 de diciembre de 2013 8:39
> *To:* Helena Garcia-Nieto; 'Kamailio (SER) - Users Mailing List'
> *Subject:* Re: [SR-Users] 500 I'm terribly sorry error
>
> I already told to pring the $ru, have you done it?
>
> Daniel
>
> On 10/12/13 17:09, Helena Garcia-Nieto wrote:
>
> Hi Daniel,
>
> Thanks for the answer but...
>
> I already tested if the problem is there and even commenting the
> prefix out the error is exactly the same.
>
> That is why I test it using:
>
> pstn.gw_ip = "10.XX.XX.XX"
>
> pstn.gw_port = "5060"
>
> And route(PSTN)
>
> Without changing original PSTN routing.
>
> I'm getting the same problem.
>
> Could you think on something else that can be affecting that?
>
> Helena
>
> *From:*sr-users-bounces at lists.sip-router.org
> <mailto:sr-users-bounces at lists.sip-router.org>
> [mailto:sr-users-bounces at lists.sip-router.org] *On Behalf Of
> *Daniel-Constantin Mierla
> *Sent:* martes, 10 de diciembre de 2013 16:54
> *To:* Kamailio (SER) - Users Mailing List
> *Subject:* Re: [SR-Users] 500 I'm terribly sorry error
>
> Hello,
>
> I guess the r-uri is not correct after your changes. you can try
> to print $ru with xlog(...) just before the route(RELAY).
>
> You should use string operation to add the prefix instead of using
> a regular expression substitution, like:
>
> prefix("A99901");
>
> or
>
> $rU = "A99901" + $rU;
>
> Cheers,
> Daniel
>
>
> On 10/12/13 16:19, Helena Garcia-Nieto wrote:
>
> Hello,
>
> Thanks in advanced for the help. I am almost new with kamailio
> and still struggling through silly problems so please forgive
> me if the solution is so obvious.
>
> I have a network like
>
> Xlitle -- Kamailio -- GW
>
> The GW is more or less out of my reach for changing the behaivour.
>
> As devices I have xlitle
>
> Kamailio is on version 4.0.2
>
> I've changed only few things from the default config file. Add
> mysql support, auth, userlocdb, pstngw.
>
> For this part, gw routing , I've defined gw ip and port inside
> the PSTN definition like:
>
> #!ifdef WITH_PSTN
>
> # PSTN GW Routing
>
> #
>
> # - pstn.gw_ip: valid IP or hostname as string value, example:
>
> # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
>
> #
>
> # - by default is empty to avoid misrouting
>
> pstn.gw_ip = "" desc "PSTN GW Address"
>
> pstn.gw_port = "" desc "PSTN GW Port"
>
> iskratel.gw_ip = "10.XX.XX.XX"
>
> iskratel.gw_port = "5060"
>
> #!endif
>
> I route the calls with:
>
> route(ISKRATEL);
>
> And defined a routing function
>
> route[ISKRATEL] {
>
> #!ifdef WITH_PSTN
>
> # check if ISKRATEL GW IP is defined
>
> if (strempty($sel(cfg_get.iskratel.gw_ip))) {
>
> xlog("SCRIPT: PSTN rotuing enabled but
> iskratel.gw_ip not defined\n");
>
> return;
>
> }
>
> # only local users allowed to call
>
> if(from_uri!=myself) {
>
> sl_send_reply("403", "Not Allowed");
>
> exit;
>
> }
>
> if (strempty($sel(cfg_get.iskratel.gw_port))) {
>
> $ru = "sip:" + $rU + "@" +
> $sel(cfg_get.iskratel.gw_ip);
>
> } else {
>
> $ru = "sip:" + $rU + "@" +
> $sel(cfg_get.iskratel.gw_ip) + ":"
>
> +
> $sel(cfg_get.iskratel.gw_port);
>
> }
>
> # Add profix to ISKRATEL: A99901
>
> subst_uri('/^sip:(.*)/sip:A99901\1/i')
> <sip:%28.*%29/sip:A99901%5C1/i%27%29>; # add A99901
>
> route(RELAY);
>
> exit;
>
> #!endif
>
> return;
>
> }
>
> I can see that the code goes all the way to the route(relay)
> but all I can see is the 500 I'm terribly sorry, server error
> occurred (7/SL) and a second response 500 I'm terribly sorry,
> server error occurred (7/TM)
>
> I've tried defining the IP as the given pstn.gw_ip and
> route(pstn) without changing anything on the pst default
> routing but the response of the server is the same.
>
> I cannot see any special error on the logs.
>
> I have the exact same config for this part, in another test
> server and the calls go to the gw without reporting any error.
>
> I'll appreciate any help from you! Thanks in advanced for your
> time
>
> Helena
>
>
>
>
>
> _______________________________________________
>
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>
> sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
>
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
>
> --
>
> Daniel-Constantin Mierla -http://www.asipto.com
>
> http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -http://www.linkedin.com/in/miconda
>
>
>
> --
> Daniel-Constantin Mierla -http://www.asipto.com
> http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -http://www.linkedin.com/in/miconda
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20131211/012a9b7c/attachment-0001.html>
More information about the sr-users
mailing list