[SR-Users] hanging active dialog...
Gertjan Wolzak
g.wolzak at foize.com
Wed Aug 28 10:58:58 CEST 2013
Daniel,
Thank you for the examples.
Sorry, for the direct email, was not my intention.
Tried, and I get my results.
Thanks again.
Rgds,
Gertjan
From: Daniel-Constantin Mierla [mailto:miconda at gmail.com]
Sent: vrijdag 23 augustus 2013 17:31
To: Gertjan Wolzak; 'Kamailio (SER) - Users Mailing List'
Subject: Re: [SR-Users] hanging active dialog...
The example is the raw command to send, but kamctl takes care to format it.
You should do:
kamctl fifo profile_list_dlg callers
or
kamctl fifo profile_list_dlg callers _URI_
Replace the _URI_ with the value that was in $fu.
Cheers,
Daniel
On 8/23/13 3:34 PM, Gertjan Wolzak wrote:
I have tried with kamctl...
But because I found the documentation not very clear, I think I am doing it
wrong.
Let’s take the 8.6:
:profile_list_dlgs:_reply_fifo_file_
inbound_calls
_empty_line_
Where the parameters are profile and value, whereby the value is optional.
I tried : kamctl fifo :profile_list_dlgs: _reply_fifo_file_inbound_calls
callers
Im pretty sure that is not correct.
Been looking for the correct why on google, but can find a clear
explanation.
Gertjan.
From: sr-users-bounces at lists.sip-router.org
[mailto:sr-users-bounces at lists.sip-router.org] On Behalf Of
Daniel-Constantin Mierla
Sent: vrijdag 23 augustus 2013 15:06
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] hanging active dialog...
Have you listed the profile via kamctl or kamcmd? The commands are in the
readme:
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp3737432
Is the afferent profile listing any dialog?
Cheers,
Daniel
On 8/23/13 2:50 PM, Gertjan Wolzak wrote:
Hello Carlos,
I have been looking at your module, can’t wait to work with it, especially
the prepaid part.
But as this system is in production, can’t just start experimenting, want
to
. But cant.
So just have to wait for some tips on the cli
.
But thanks.
Rgds,
Gertjan
From: sr-users-bounces at lists.sip-router.org
[mailto:sr-users-bounces at lists.sip-router.org] On Behalf Of Carlos Ruiz Díaz
Sent: vrijdag 23 augustus 2013 14:37
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] hanging active dialog...
I don't know what exactly happened in your case but if you don't have time
to investigate you can try cnxcc module [1] channel control to achieve the
same goal.
Take a look at the sample configuration file located in [2]
xlog("L_INFO", "Setting up channel based
credit control");
$var(max_chan) = 2;
$var(retcode) = cnxcc_set_max_channels("$var(client)",
"$var(max_chan)");
if ($var(retcode) == -1) {
xlog("Error setting up credit control");
return;
}
$var(count) = -1;
if (!cnxcc_get_channel_count("$var(client)", "$var(count)")) {
xlog("Error getting customer's channel
count"
);
}
xlog("L_INFO", "CNXCC ROUTE: $var(client) has $var(count) call(s)");
if ($var(retcode) < -1) {
xlog("Too many channels for <
/span>custome
r");
sl_send_reply(403, "Forbidden");
if (!cnxcc_terminate_all("$var(client)")) {
xlog("Error terminating customer's calls");
}
exit;
}
[1] http://kamailio.org/docs/modules/devel/modules/cnxcc.html
[2]
https://github.com/caruizdiaz/cnxcc/blob/master/example/kamailio-cnxcc.cfg
Regards,
Carlos
On Fri, Aug 23, 2013 at 5:16 AM, Gertjan Wolzak <g.wolzak at foize.com> wrote:
Goodmorning All,
I use the following route to check for concurrent calls by the same user, if
a concurrent call is tried it is not allowed.
route[CONCURRENT]
{
xlog("SCRIPT: Conccurrent call check");
if(!get_profile_size("caller","$fu","$avp(nrcalls)"))
{
sl_send_reply("403", "Call not matching profile");
exit;
}
xlog("SCRIPT: caller value for $fu is $avp(nrcalls)");
if($avp(nrcalls)>= 1)
{
sl_send_reply("403", "Active calls limit exceeded");
exit;
}
dlg_manage();
if(!set_dlg_profile("caller","$fu"))
{
sl_send_reply("500", "No new channels in this profile");
exit;
}
xlog("SCRIPT: caller value for $fu is now $avp(nrcalls)");
}
Now I had a situation where a user could not call because the
get_profile_size for this user gave the value 1. So another call was not
allowed.
But the user did not have a call active. As no dialogs were active, checked
that.
I assume there can be a lot of reasons why this happens, also I want to use
the “I don’t want to know the cause” method to solve this.
So I looked at the dialog module documentation, to see if I can just clear
the profile size for this specific user.
I wanted to use the profile_list_dlgs(8.6) to get the dialog details, then
the dlg_terminate_dlg(8.4) to, you guessed it, terminate that dialog.
But it’s not clear to me how I can give those commands
.
Is there a way to give those commands on the cli, if so can someone please
write down some examples
Would be really appreciated.
Rgds,
Gertjan
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Carlos
http://caruizdiaz.com
+595981146623
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users at lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -
http://www.linkedin.com/in/miconda
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20130828/0ce5bda2/attachment-0001.html>
More information about the sr-users
mailing list