[SR-Users] hanging active dialog...

[Daniel-Constantin Mierla]

Have you listed the profile via kamctl or kamcmd? The commands are in 
the readme:

http://kamailio.org/docs/modules/stable/modules/dialog.html#idp3737432

Is the afferent profile listing any dialog?

Cheers,
Daniel

On 8/23/13 2:50 PM, Gertjan Wolzak wrote:
>
> Hello Carlos,
>
> I have been looking at your module, can't wait to work with it, 
> especially the prepaid part.
>
> But as this system is in production, can't just start experimenting, 
> want to.... But cant.
>
> So just have to wait for some tips on the cli....
>
> But thanks.
>
> Rgds,
>
> Gertjan
>
> *From:*sr-users-bounces at lists.sip-router.org 
> [mailto:sr-users-bounces at lists.sip-router.org] *On Behalf Of *Carlos 
> Ruiz Díaz
> *Sent:* vrijdag 23 augustus 2013 14:37
> *To:* Kamailio (SER) - Users Mailing List
> *Subject:* Re: [SR-Users] hanging active dialog...
>
> I don't know what exactly happened in your case but if you don't have 
> time to investigate you can try cnxcc module [1] channel control to 
> achieve the same goal.
>
> Take a look at the sample configuration file located in [2]
>
>   
> xlog("L_INFO",  "Setting  up  channel  based  credit  control")/;/
>   
>   
>           $var(max_chan)    *=*  2;
>   
>           $var(retcode)    = cnxcc_set_max_channels("$var(client)", "$var(max_chan)");
>   
>   
>           if ($var(retcode)  *=*= -1) {
>   
>                   xlog("Error setting up credit control");
>                   return;
>   
>           }
>   
>   
>          $var(count)      *=*  -1;
>   
>   
>          if  (!cnxcc_get_channel_count("$var(client)",  "$var(count)"))  {
>   
>                  xlog("Error  getting  customer's  channel  count")/;/
>   
>          }
>   
>   
>          xlog("L_INFO",  "CNXCC  ROUTE:  $var(client)  has  $var(count)  call(s)")/;/
>   
>   
>           if  ($var(retcode)  <  -1)  {
>   
>                   xlog("Too  many  channels  for  customer")/;/
>   
>                   sl_send_reply(403,  "Forbidden")/;/
>   
>   
>                   if  (!cnxcc_terminate_all("$var(client)"))  {
>   
>                            xlog("Error  terminating  customer's  calls")/;/
>   
>                   }
>   
>   
>                   exit/;/
>           }
>   
>   
> [1]http://kamailio.org/docs/modules/devel/modules/cnxcc.html
> [2]https://github.com/caruizdiaz/cnxcc/blob/master/example/kamailio-cnxcc.cfg
>   
> Regards,
> Carlos
>   
>
> On Fri, Aug 23, 2013 at 5:16 AM, Gertjan Wolzak <g.wolzak at foize.com 
> <mailto:g.wolzak at foize.com>> wrote:
>
> Goodmorning All,
>
> I use the following route to check for concurrent calls by the same 
> user, if a concurrent call is tried it is not allowed.
>
> route[CONCURRENT]
>
> {
>
>         xlog("SCRIPT: Conccurrent call check");
>
> if(!get_profile_size("caller","$fu","$avp(nrcalls)"))
>
>         {
>
>                 sl_send_reply("403", "Call not matching profile");
>
>                 exit;
>
>         }
>
>         xlog("SCRIPT: caller value for $fu is $avp(nrcalls)");
>
>         if($avp(nrcalls)>= 1)
>
>         {
>
>                 sl_send_reply("403", "Active calls limit exceeded");
>
>                 exit;
>
>         }
>
>         dlg_manage();
>
> if(!set_dlg_profile("caller","$fu"))
>
>         {
>
>                 sl_send_reply("500", "No new channels in this profile");
>
>                 exit;
>
>         }
>
>         xlog("SCRIPT: caller value for $fu is now $avp(nrcalls)");
>
> }
>
> Now I had a situation where a user could not call because the 
> get_profile_size for this user gave the value 1. So another call was 
> not allowed.
>
> But the user did not have a call active. As no dialogs were active, 
> checked that.
>
> I assume there can be a lot of reasons why this happens, also I want 
> to use the "I don't want to know the cause" method to solve this.
>
> So I looked at the dialog module documentation, to see if I can just 
> clear the profile size for this specific user.
>
> I wanted to use the profile_list_dlgs(8.6) to get the dialog details, 
> then the dlg_terminate_dlg(8.4) to, you guessed it, terminate that dialog.
>
> But it's not clear to me how I can give those commands....
>
> Is there a way to give those commands on the cli, if so can someone 
> please write down some examples...
>
> Would be really appreciated.
>
> Rgds,
>
> Gertjan
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> -- 
> Carlos
>
> http://caruizdiaz.com
>
> +595981146623
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20130823/454c8fe3/attachment-0001.html>