[SR-Users] Issues Kamailio 4.0 and Asterisk 11
Nishar M.H
nisharmh85 at gmail.com
Sun Aug 18 07:13:15 CEST 2013
HI,
I have used *if**(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")**)* and now i am able
to start the kamailio using kamctl start
Here is the log below.:
Aug 18 08:24:45 kamailio-VirtualBox /usr/local/sbin/kamailio[3757]: INFO:
rr [rr_mod.c:159]: outbound module not available
Aug 18 08:24:45 kamailio-VirtualBox /usr/local/sbin/kamailio[3757]: INFO:
usrloc [hslot.c:53]: locks array size 512
Aug 18 08:24:45 kamailio-VirtualBox /usr/local/sbin/kamailio[3757]: INFO:
auth [auth_mod.c:350]: auth: qop set, but nonce-count (nc_enabled) support
disabled
Aug 18 08:24:45 kamailio-VirtualBox /usr/local/sbin/kamailio[3757]: INFO:
<core> [udp_server.c:179]: INFO: udp_init: SO_RCVBUF is initially 163840
Aug 18 08:24:45 kamailio-VirtualBox /usr/local/sbin/kamailio[3757]: INFO:
<core> [udp_server.c:230]: INFO: udp_init: SO_RCVBUF is finally 262142
Aug 18 08:24:45 kamailio-VirtualBox /usr/local/sbin/kamailio[3757]: INFO:
<core> [udp_server.c:179]: INFO: udp_init: SO_RCVBUF is initially 163840
Aug 18 08:24:45 kamailio-VirtualBox /usr/local/sbin/kamailio[3757]: INFO:
<core> [udp_server.c:230]: INFO: udp_init: SO_RCVBUF is finally 262142
Aug 18 08:24:45 kamailio-VirtualBox /usr/local/sbin/kamailio[3773]: INFO:
ctl [io_listener.c:225]: io_listen_loop: using epoll_lt io watch method
(config)
Aug 18 08:28:54 kamailio-VirtualBox /usr/local/sbin/kamailio[3771]: ERROR:
mi_fifo [fifo_fnc.c:470]: fifo command domain_dump is not available
Aug 18 08:49:13 kamailio-VirtualBox /usr/local/sbin/kamailio[3764]: NOTICE:
acc [acc.c:275]: ACC: call missed:
timestamp=1376801353;method=INVITE;from_tag=ae70066a;to_tag=e90f3c6b;call_id=NmEwMzE3ZDBkNGEwZmRhODMwNDMzZDNkZmVjNGVmODM.;code=486;reason=Busy
Here;src_user=1000;src_domain=192.168.20.208;src_ip=192.168.20.186;dst_ouser=1000;dst_user=1000;dst_domain=192.168.20.186
I am able to call sip to sip for internal purpose.
In Asterisk Server i have created a trunk and after the command "sip show
peers" it show like below :
localhost*CLI> sip show peers
Name/username Host Dyn
Forcerport ACL Port Status Description
Realtime
*kamailio
192.168.20.208 5060 OK (1
ms)*
1 sip peers [Monitored: 1 online, 0 offline Unmonitored: 0 online, 0
offline]
Now how can i test the calls are going through Asterisk ?
Thanks in advance.
Regards,
Nishar Hamsa
On Sat, Aug 17, 2013 at 1:06 PM, SamyGo <govoiper at gmail.com> wrote:
> Check regular expression as the logs state. Modify with correct one.
>
> sent from a little smart phone
> On Aug 17, 2013 2:03 PM, "Nishar M.H" <nisharmh85 at gmail.com> wrote:
>
>> HI,
>>
>> I have followed the same.
>>
>> When i run :
>>
>> *kamctl start*
>>
>> I got the same error like :
>>
>> *INFO: Starting Kamailio :
>>
>> ERROR: PID file /var/run/kamailio.pid does not exist -- Kamailio start
>> failed*
>>
>> Here is the log file :
>>
>> Aug 17 12:57:31 kamailio-VirtualBox kamailio: INFO: <core>
>> [tcp_main.c:4846]: init_tcp: using epoll_lt as the io watch method (auto
>> detected)
>> Aug 17 12:57:31 kamailio-VirtualBox /usr/local/sbin/kamailio[2110]: INFO:
>> rr [../outbound/api.h:49]: Failed to import bind_ob
>> Aug 17 12:57:31 kamailio-VirtualBox /usr/local/sbin/kamailio[2110]: INFO:
>> rr [rr_mod.c:159]: outbound module not available
>> Aug 17 12:57:31 kamailio-VirtualBox /usr/local/sbin/kamailio[2110]: INFO:
>> usrloc [hslot.c:53]: locks array size 512
>> Aug 17 12:57:31 kamailio-VirtualBox /usr/local/sbin/kamailio[2110]: INFO:
>> auth [auth_mod.c:350]: auth: qop set, but nonce-count (nc_enabled) support
>> disabled
>> Aug 17 12:57:31 kamailio-VirtualBox /usr/local/sbin/kamailio[2110]:
>> ERROR: <core> [rvalue.c:3026]: Bad regular expression
>> "^([1-5]01[0-9]$"(853,50-853,66)
>> Aug 17 12:57:31 kamailio-VirtualBox /usr/local/sbin/kamailio[2110]:
>> ERROR: <core> [route.c:1214]: fixing failed (code=-1) at
>> cfg:/usr/local/etc/kamailio//kamailio.cfg:857
>>
>>
>> Some issues is there with the pattern.
>>
>> Regards,
>>
>> Nishar Hamsa
>>
>>
>>
>>
>> On Sat, Aug 17, 2013 at 11:29 AM, SamyGo <govoiper at gmail.com> wrote:
>>
>>> Dear Nishar,
>>>
>>> From the mentioned URL the configurations need the following changes.
>>>
>>> On the top start on configs you need to use: WITH_PSTN and might not
>>> need WITH_ASTERISK
>>>
>>> #!KAMAILIO
>>> #!define WITH_MYSQL#!define WITH_AUTH#!define WITH_USRLOCDB#!define WITH_PSTN
>>>
>>> The insert your asterisk IP in the following line:
>>>
>>>
>>> pstn.gw_ip = "<AsteriskIPHere>" desc "PSTN GW Address"
>>>
>>>
>>> Next your route[LOCATION] is called after the route[PSTN] from default
>>> config file so you'll have to put proper regexp/conditions to avoid your
>>> regular Extension to Extension calls to go out to PSTN-Asterisk.
>>>
>>> Now in route[PSTN] add another condition to return from PSTN route when
>>> a local extension is dialed.
>>>
>>> if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$") || $rU=~"^([1-5]01[0-9]$"))
>>>
>>>
>>> return;
>>>
>>>
>>> That will ensure that your regular extensions set don't route out to
>>> PSTN asterisk and infact will enter the route[LOCATION] where a user
>>> location DB search is made and an online user is found for the dialed
>>> destination and a successful call will be established.
>>>
>>> I think that should be all for now.
>>>
>>> BR,
>>> Sammy
>>>
>>>
>>>
>>>
>>>
>>> On Fri, Aug 16, 2013 at 4:06 AM, Victor V. Kustov <coyote at bks.tv> wrote:
>>>
>>>> Hi, Nishar M.H!
>>>>
>>>> >
>>>> >ERROR: PID file /var/run/kamailio.pid does not exist -- Kamailio
>>>> >start failed
>>>>
>>>> see log for details. do not use dumb copy/paste for kamailio config.
>>>>
>>>> --
>>>> WBR, Victor
>>>> I use FREE operation system: 3.10.4-calculate GNU/Linux
>>>>
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>> sr-users at lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users at lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>
>>
>> --
>>
>>
>> Thanks & Regards,
>>
>> --------------------------------------------------------------------------------------------
>>
>>
>> *Nishar Hamsa
>>
>> *
>>
>>
>>
>>
>> --------------------------------------------------------------------------------------------
>>
>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
--
Thanks & Regards,
--------------------------------------------------------------------------------------------
*Nishar Hamsa
*
--------------------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20130818/545a7f63/attachment.html>
More information about the sr-users
mailing list