[SR-Users] $fs syntax

[Ovidiu Sas]

In this case, you will need to specify the port.
If no port is specified, then the default 5060 is assumed (I think).
If you listen on two interfaces with non standard ports, then not
setting the port in fs should not match any interface.

-ovidiu

On Wed, Oct 17, 2012 at 12:41 PM, Juha Heinanen <jh at tutpro.com> wrote:
> Ovidiu Sas writes:
>
>> IIRC, port is also optional.
>
> lets say that you have two listening ports on the same ip, one that is
> used for external traffic and the other for internal.  if you leave port
> out when you force the socket, which socket it is using?
>
> -- juha
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



-- 
VoIP Embedded, Inc.
http://www.voipembedded.com