[SR-Users] Proxy Registrations offset port
SamyGo
govoiper at gmail.com
Wed Mar 21 05:23:47 CET 2012
Hi Robert,
There can't be any simpler start then using the configurations(kamailio.cfg
file) mentioned in this blog-post by Daniel.
http://kb.asipto.com/asterisk:realtime:kamailio-3.1.x-asterisk-1.6.2-astdb
You can see a *route[REGFWD]* and in that route you can relay the
REGISTRATIONS to your desired SIP-Server!!
This is by far the easiest and simplest start I've found without any
headache of going deeper into the SIP packets and techniques.
See this is the concerned route.
# Forward REGISTER to *YOUR_SIP_REGISTRAR_SERVER*
route[REGFWD] {
if(!is_method("REGISTER"))
{
return;
}
$var(rip) = $sel(cfg_get.asterisk.bindip); #CHANGE THE
asterisk.bindip/asterisk.bindport on the top
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" + $sel(cfg_get.asterisk.bindport);
$uac_req(furi)="sip:" + $au + "@" + $var(rip);
$uac_req(turi)="sip:" + $au + "@" + $var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport) + ">\r\n"; # Change
Kamailio.bindip/port as well.
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $hdr(Expires) + "\r\n";
uac_req_send();}#!endif
Make sure you do DB tables and Variables adjustments accordingly.
Regards,
Sammy.
NOTE: Thanks Sir Daniel for these wonderful and very helpful blogposts.
On Wed, Mar 21, 2012 at 3:41 AM, Daniel-Constantin Mierla <miconda at gmail.com
> wrote:
> Hello,
>
>
> On 3/20/12 10:36 PM, Robert wrote:
>
> I've spent a significant amount of time now jacking with configurations…
>
> Maybe I should re-state what I'm trying to do…
>
> I'm trying to establish an SBC / UpperRegistration SBC…
>
> The goal – is to listen on a port other than 5060 and relay the
> registration to the actual proxy.
>
> I.e. IP Phone ---> Kamailio (port 8080) ----> Sip proxy (port 5060)
>
> I've tried all combinations of rewritehostport / t_replicate etc…
>
> perhaps t_relay_to(...) is enough, depending on what the r-uri address
> contain (should be registrar server address, if K on port 8080 is used as
> outbound proxy).
>
> You have to use path module and the sip proxy on 5060 has to understand
> the path headers (it is not clear that proxy on 5060 is Kamailio, if it is,
> then it support path).
>
>
>
> The best I get is an attempt to register followed by an unauthorized
> with request for digest auth..
>
> I don't want to store any credentials in Kamailio – I just want to act
> as an offset port for users who cannot reach 5060…
>
>
> Forwarding registrations is fine, no need to authenticate them on K port
> 8080. Perhaps providing the relevant part of your config along with a ngrep
> SIP trace on K port 8080 will help to give you the right directions to get
> it work.
>
> Cheers,
> Daniel
>
>
>
> OpenSBC was working for this – however the registrations were timing out
> and not renewing
>
>
> From: Reda Aouad <reda.aouad at gmail.com>
> Reply-To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
> Users Mailing List" <sr-users at lists.sip-router.org>
> Date: Fri, 9 Mar 2012 17:16:14 +0100
> To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -Users
> Mailing List" <sr-users at lists.sip-router.org>
> Subject: Re: [SR-Users] Proxy Registrations offset port
>
> No wonder your signallin is not reaching the final client.
>
> I didnt't suggest to throw OpenSips. NAT handling is delicate woth
> proxies.
>
> Start by looking at some wireshark dump to see what's wrong.
>
>
> Reda
>
> On 9 mars 2012, at 16:57, Robert <robert at inteli-core.com> wrote:
>
> Two different tests I completed:
>
> Test #1 – it showed the opensips server
> Test #2 – it showed the client's public ip address
>
> The issue is not as much RTP – but I'm not getting SIP signaling back to
> the client.. Which leads me to believe the NAT problem. I'm not even
> getting ringing…
>
> Maybe I should go ahead and install Kamailio and throw out the OpenSIPs
> stuff…
>
>
>
> From: Reda Aouad <reda.aouad at gmail.com>
> Reply-To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
> Users Mailing List" <sr-users at lists.sip-router.org>
> Date: Fri, 9 Mar 2012 16:41:57 +0100
> To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -Users
> Mailing List" <sr-users at lists.sip-router.org>
> Subject: Re: [SR-Users] Proxy Registrations offset port
>
> Kamailio's default conf is really a good place to start, you just have
> to disable the authentication, by commenting the corresponding route.
>
> You can start by looking at a wireshark/tcpdump dump on your PortaOne
> server to know where the rtp stream is going, and then troubleshoot
> accordingly..
>
> On your PortaOne server, what is the location of registered users? Is it
> their IP@, or that of OpenSips server?
>
> Reda
>
> On 9 mars 2012, at 16:28, Robert <robert at inteli-core.com> wrote:
>
> Thank you so much for answering.. The folks at the other place don't
> want to help.
>
> We have a PortaOne SIP platform… It does everything… It's listening on
> port 5060 – public ip..
>
> We want to deploy Kamailio or some derivative of SER to listen on PUBLIC
> port – other than 5060 – for our customers who cannot reach 5060.
>
> Using a very simple rewritehostport statement – I was successful in
> getting the registration to pass through. I.e. Registered my Aastra and
> X-Lite to port 8080 and saw registration in PortaOne.
>
> I do not want K/SER to do actual auth / registration – I.e. I do not
> care who tries to use it – I want final registration to be PortaOne… That's
> why I think the simple rewritehostport worked well. OpenSIPS was not doing
> any auth – just simply passing it on.
>
> Our PortaOne was handling RTP Proxy – so during an outbound call I was
> getting 2 way audio – no problem.
> However when an inbound call would come in from PortaOne – it was being
> delivered to OpenSIPS and looks like Opensips was reporting 401
> Unauthorized.
>
> The Aastra / X-Lite are NAT… It's possible that either I need to look at
> nathlper closer – or that I misconfigured something somewhere.
>
> I guess I'm not fluent enough in the configs and options to get a good
> config.
>
>
> From: Reda Aouad <reda.aouad at gmail.com>
> Reply-To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
> Users Mailing List" <sr-users at lists.sip-router.org>
> Date: Fri, 9 Mar 2012 15:45:14 +0100
> To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users
> Mailing List" <sr-users at lists.sip-router.org>
> Subject: Re: [SR-Users] Proxy Registrations offset port
>
> Hi Robert,
>
> I had the same feeling about O***sips community.....
>
> I have a similar setup. A proxy that listens on port other than 5060,
> forwarding to other servers on 5060.
> If you can better define better your problem with your setup, maybe we can
> help you better.
>
> Is your server listening only on one port 8080? Is your server behind
> NAT or does it have a public IP @ on the interface it's listening on? What
> is the exact problem with inbound calls? Are you doing record-route? Do you
> forward only registrations, or are your handling invites as well? What
> server listens on port 5060? Another Kamailio server? Does it handle
> clients behind NAT?
>
> You should know that Kamailio is a SIP server, not a PBX/sofswitch/SBC
> as Asterisk or Freeswitch.
> If you define better your problem, and send me your config file (by
> private email if you like), I may look at it.
>
> Reda
>
>
>
> On Fri, Mar 9, 2012 at 15:32, Robert <robert at inteli-core.com> wrote:
>
>> I've been playing with OpenSIPS and am willing to change over if it
>> means I'll get a more informed answer from this community..
>>
>> I need to set up a proxy forwarding server that can listen on a port
>> other than 5060 – I.e. 8080 and forward the registration requests to
>> another Voip platform we have that is running on 5060.
>>
>> I've been able to this under OpenSIPS but I'm having issues with
>> inbound calls. It could be a NAT issue.
>>
>> Basically listen on 8080 – forward any and all registrations to x:5060
>> — which I've done using rewritehostport
>>
>> Anyone have any good example configs for this? I'm a n00b at this
>> OpenSER stuff – but have been around asterisk / freeswitch / portaone for a
>> while.
>>
>> Thanks in advance
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
> _______________________________________________ SIP Express Router (SER)
> and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> _______________________________________________ SIP Express Router (SER)
> and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> _______________________________________________ SIP Express Router (SER)
> and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users at lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Daniel-Constantin Mierla
> Kamailio Advanced Training, April 23-26, 2012, Berlin, Germanyhttp://www.asipto.com/index.php/kamailio-advanced-training/
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20120321/2870e85b/attachment-0001.htm>
More information about the sr-users
mailing list