[SR-Users] RTPproxy on Kamailio 3.2.1 difficulty.

nunu abe nunu_abe at yahoo.com
Mon Jan 9 15:36:11 CET 2012


Thank you very much Sammy :)
 
I am now better aquinted with rtpproxy, but my problem still exists. The rtpproxy server does infact try to do its job. It replaces the IN IP address by its own address everytime it forwards SIP INVITE messages but the callee UA does not respond. The wireshark output says that the packets are too long or unrecognised SIP header.
 Any ideas ???
 
Thank you for your help?
 
Regards
Maedot
 

________________________________
 From: Sammy Govind <govoiper at gmail.com>
To: nunu abe <nunu_abe at yahoo.com> 
Cc: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List <sr-users at lists.sip-router.org> 
Sent: Friday, January 6, 2012 12:02 PM
Subject: Re: [SR-Users] RTPproxy on Kamailio 3.2.1 difficulty.
 

Congrats so now RTPproxy issue has been resolved and Kamailio is saying that support for it has been enables.
 Next thing is ...ignore the reverse resolving of IPv6 IP !! thats not an issue at all for now.

The error you are receiving is due to sip PUBLISH method ... that can be a bug in Kamailio or anything on which I can't comment any better than you.

I hope some other gy take over the thread from here and see if this _IS_ really an issue or not, if so why is this here then !! 

Regards,
Sammy.



On Fri, Jan 6, 2012 at 3:37 PM, nunu abe <nunu_abe at yahoo.com> wrote:

Hi,
>
>
>I commented out the unix socket in the modparam as instructed and there is still no change. 
>
>
>1. The rtpproxy was listening to port 7722, but to make sure I stopped it and restarted it with the command: 
>    xxx at DualStackCS:~$ sudo netstat -pln |grep rtpp
>    udp        0      0 127.0.0.1:7722         0.0.0.0:*                           860/rtpproxy    
>
>
>    xxx at DualStackCS:~$ sudo /etc/init.d/rtpproxy restart
>    Restarting RTP relay: rtpproxy.
>
>
>    xxxxx at DualStackCS:~$ sudo netstat -pln |grep rtpp
>    udp        0      0 127.0.0.1:7722          0.0.0.0:*                           2303/rtpproxy   
>
>
>    xxxx at DualStackCS:~$ sudo /etc/init.d/rtpproxy stop
>    Stopping RTP relay: rtpproxy.
>   
>
>   xxxxx at DualStackCS:~$ sudo netstat -pln |grep rtpp
>    xxxxx at DualStackCS:~$ sudo rtpproxy -F -l 10.10.10.10 -6 /3001:0:0:1::10 -s udp:127.0.0.1:7722
>    xxxxx at DualStackCS:~$ sudo netstat -pln |grep rtpp
>    udp        0      0 127.0.0.1:7722          0.0.0.0:*                           2366/rtpproxy   
>
>2.Kamailio service started without error message but with this warning:
>     0(1549) WARNING: <core> [socket_info.c:1275]: WARNING: fix_hostname: could not rev. resolve 3001:0:0:1:0:0:0:10
>
>     16(2422) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (11): nathelper
>     16(2422) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (11): rtpproxy
>     15(2421) INFO: rtpproxy [rtpproxy.c:1415]: rtp proxy <udp:localhost:7722> found, support for it enabled
>
>3.As soon as clients register, these errors appear in the logs 
>(similar errors appear even more frequently while making a call, shown in the attachment):
> 7(2407) DEBUG: <core> [parser/msg_parser.c:630]:  method:  <PUBLISH>
> 7(2407) DEBUG: <core> [parser/msg_parser.c:632]:  uri:     <sip:300@[3001:0:0:1::10]>
> 7(2407) DEBUG: <core> [parser/msg_parser.c:634]:  version: <SIP/2.0>
> 7(2407)
 DEBUG: <core> [parser/parse_via.c:1288]: Found param type 232, <branch> = <z9hG4bK3847>; state=16
> 7(2407) DEBUG: <core> [parser/parse_via.c:2563]: end of header reached, state=5
> 7(2407) DEBUG: <core> [parser/msg_parser.c:515]: parse_headers: Via found, flags=2
> 7(2407) DEBUG: <core> [parser/msg_parser.c:517]: parse_headers: this is the first via
> 7(2407) DEBUG: <core> [receive.c:147]: After parse_msg...
> 7(2407) DEBUG: <core> [receive.c:188]: preparing to run routing scripts...
> 7(2407) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=464 a=6 n=route
> 7(2407) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=573 a=17 n=if
> 7(2407) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=568 a=26 n=mf_process_maxfwd_header
> 
> 6(2406) ERROR: *** cfgtrace:
 c=[/usr/local/etc/kamailio/kamailio.cfg] l=744 a=26 n=is_method
> 6(2406) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=767 a=25 n=consume_credentials
> 6(2406) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=780 a=3 n=return
> 6(2406) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=489 a=26 n=remove_hf
> 6(2406) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=500 a=6 n=route
> 6(2406) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=704 a=27 n=sl_send_reply
>
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=467 a=6 n=route
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=789 a=17 n=if
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=789 a=57 n=force_rport
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=799
 a=17 n=if
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=790 a=26 n=nat_uac_test
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=795 a=17 n=if
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=791 a=26 n=is_method
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=792 a=25 n=fix_nated_register
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=796 a=40 n=setflag
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=799 a=3 n=return
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=470 a=6 n=route
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=617 a=17 n=if
> 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=582 a=25 n=has_totag 
>
>
>So still lost in this issue.
>Thanks for your help! 
>
>
>Regards,
>Maedot
> 
>
>________________________________
>
>From: Sammy Govind <govoiper at gmail.com>
>To: nunu abe <nunu_abe at yahoo.com>; SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List <sr-users at lists.sip-router.org> 
>Sent: Friday, January 6, 2012 10:06 AM
>
>Subject: Re: [SR-Users] RTPproxy on Kamailio 3.2.1 difficulty.
>
>
>
>Don't forget to change the modparams for RTPproxy as 
>
>
>modparam("rtpproxy", "rtpproxy_sock", "udp:localhost:7722")
># modparam("rtpproxy", "rtpproxy_sock", "unix:/var/run/rtpproxy/rtpproxy.sock") 
>
>
>
>On Fri, Jan 6, 2012 at 2:05 PM, Sammy Govind <govoiper at gmail.com> wrote:
>
>Hi,
>>
>>
>>Kamailio is trying to communicate to RTproxy using port  7722 , execute the command
>>
>>
>>#netstat -pln | grep rtpp 
>>
>>
>>and see if your rtpproxy is even listening on that interface, which it isn't for sure.
>>
>>No if above is true then stop rtpproxy and start rtpproxy using the b/m command
>>
>> 
>>#sudo rtpproxy -F -l 10.10.10.10 -6 /3001:0:0:1::10 -s udp:127.0.0.1:7722 
>>
>>confirm using the netstat command that RTPproxy is indeed listening on 7722 port, if yes restart Kamailio and make sure you don't see kamailio complaining about not connecting to RTPproxy anymore.
>>
>> 
>>
>>
>>Regards,
>>Sammy.
>>
>>
>>On Fri, Jan 6, 2012 at 1:31 PM, nunu abe <nunu_abe at yahoo.com> wrote:
>>
>>Hi, 
>>> 
>>>I have already posted this message but it was sent only to Sammy Govind somehow, not to the mailing list. So I am posting it again to the list. I am sorry if this is double posting or if this is not the right way to do it. 
>>> 
>>>**Original message***
>>> 
>>> 
>>>Hi Sammy 
>>>These are the params from my kamilio cfg file. Just a reminder, the whole cfg file is copied from the link: http://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6, i just edited the IP addresses and DB_URL line to fit my settings.  
>>>#!ifdef WITH_NAT
>>># ----- rtpproxy params -----
>>># modparam("rtpproxy", "rtpproxy_sock", "udp:localhost:7722")
>>>modparam("rtpproxy", "rtpproxy_sock", "unix:/var/run/rtpproxy/rtpproxy.sock")
>>>
>>># ----- nathelper params -----
>>>modparam("nathelper", "natping_interval", 30)
>>>modparam("nathelper", "ping_nated_only", 1)
>>>modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
>>>modparam("nathelper", "sipping_from", "sip:pinger at kamailio.org")
>>>
>>># params needed for NAT traversal in other modules
>>>modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
>>>modparam("usrloc", "nat_bflag", FLB_NATB)
>>>#!endif
>>>
>>>I have tried to use both unix and UDP sockets each at a time.I removed the square braces from the IP addresses in the rtpproxy default files and its no more complainig about the "rtpproxy: setbindhost: No address associated with hostname" but still have the same messages in the logs.
>>>
>>>Thank you four your help.
>>>Regards,
>>>Maedot
>>>
>>> 
>>> From: Sammy Govind <govoiper at gmail.com>
>>>
>>>To: nunu abe <nunu_abe at yahoo.com>; SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List <sr-users at lists.sip-router.org> 
>>>Sent: Thursday, January 5, 2012 8:13 PM
>>>
>>>Subject: Re: [SR-Users] RTPproxy on Kamailio 3.2.1 difficulty.
>>> 
>>>
>>>hi,
>>>
>>>
>>>quick look at your logs,
>>>
>>>
>>>14(1596) ERROR: rtpproxy [rtpproxy.c:1466]: can't connect to RTP proxy
15(1597) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (10): nathelper
14(1596) ERROR: rtpproxy [rtpproxy.c:1538]: proxy <unix:/var/run/rtpproxy/rtpproxy.sock> does not respond, disable it 5(1584) DEBUG: db_mysql [km_my_con.c:123]: server version is 5.1.41-3ubuntu12.10
14(1596) WARNING: rtpproxy [rtpproxy.c:1395]: can't get version of the RTP proxy
14(1596) WARNING: rtpproxy [rtpproxy.c:1432]: support for RTP proxy <unix:/var/run/rtpproxy/rtpproxy.sock> has been disabled temporarily
14(1596) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (9): debugger 5(1584) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (5): nathelper
14(1596) DEBUG: debugger [debugger_mod.c:124]: rank is (9) 5(1584) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (5): rtpproxy 5(1584) ERROR: rtpproxy [rtpproxy.c:1466]: can't connect to RTP proxy 5(1584) ERROR: rtpproxy [rtpproxy.c:1538]: proxy <unix:/var/run/rtpproxy/rtpproxy.sock> does not respond, disable it 5(1584) WARNING: rtpproxy [rtpproxy.c:1395]: can't get version of the RTP proxy 5(1584) WARNING: rtpproxy [rtpproxy.c:1432]: support for RTP proxy <unix:/var/run/rtpproxy/rtpproxy.sock> has been disabled temporarily 5(1584) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (5): debugger 5(1584) DEBUG: debugger [debugger_mod.c:124]: rank is (5)
15(1597) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (10): rtpproxy
15(1597) ERROR: rtpproxy [rtpproxy.c:1466]: can't connect to RTP proxy
15(1597) ERROR: rtpproxy [rtpproxy.c:1538]: proxy <unix:/var/run/rtpproxy/rtpproxy.sock> does not respond, disable it
15(1597) WARNING: rtpproxy [rtpproxy.c:1395]: can't get version of the RTP proxy
15(1597) WARNING: rtpproxy [rtpproxy.c:1432]: support for RTP proxy <unix:/var/run/rtpproxy/rtpproxy.sock> has been disabled temporarily
15(1597) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (10): debugger
>>>
>>>
>>>
>>>paste the rtpproxy/nathelper module params lines which are in your kamailio.cfg.
>>>
>>> 
>>>regards,
>>>sammy
>>>
>>>
>>>
>>>
>>>On Wed, Jan 4, 2012 at 7:59 PM, nunu abe <nunu_abe at yahoo.com> wrote:
>>>
>>>Thank you Sammy for noticing :)
>>>>
>>>>Now I have a bit of different but same problem. After the earlier posting the message I decided to start everything from scratch and I installed everything new. 
>>>>But I still have problem. The rtpproxy server is not working, it fails to replace the IP address of the sender in the SDP and hence there is no RTP communication.
>>>>These are the steps I followed:
>>>>
>>>>
>>>>1. Freshly installed kamailio 3.2.1 on Kubuntu from GIT
>>>>
>>>>2. Installed mysql server
>>>>
>>>>4. installed rtpproxy, changed its user to be kamailio.
>>>>
>>>>3.Copied the provided kamailio.cfg file from the link and edited the IP addresses and the DBURL to reflect my settings
>>>>
>>>>4. Uncommented
 the Control socket line and added these lines in the /etc/default/rtpproxy file
>>>>  CONTROL_SOCK="unix:/var/run/rtpproxy/rtpproxy.sock"
>>>>  ADDR_IPV4=[10.10.10.10]
>>>>  ADDR_IPV6=[3001:0:0:1::10]
>>>>  EXTRA_OPTS="-l {ADDR_IPV4} -6 /{ADDR_IPV6}"
>>>>
>>>>*** I aslso tried without adding the last three lines, but it made no difference.***
>>>>
>>>>5. Started rtpproxy in a bridge mode
>>>>
>>>>xxxx at DualStackCS:~$ sudo rtpproxy -F -l 10.10.10.10 -6 /3001:0:0:1::10 
>>>>*** I have also tried to start it this way :xxxx at DualStackCS:~$ sudo rtpproxy -F -l 10.10.10.10 -6 /3001:0:0:1::10 -s unix:/var/run/rtpproxy/rtpproxy.sock  - but no difference****
>>>>
>>>>xxxx at DualStackCS:~$ ps aux|grep rtpproxy
>>>>root      1522  0.0  0.0  11384   696 ?        Ssl  15:31   0:00 rtpproxy -F -l 10.10.10.10 -6 
 3001:0:0:1::10
>>>>xxxx    1528  0.0  0.0   3324   804 pts/1    S+   15:31   0:00 grep --color=auto rtpproxy
>>>>
>>>>xxxxx at DualStackCS:~$ sudo /etc/init.d/kamailio start
>>>>
>>>>
>>>>6. Started kamailio
>>>>@DualStackCS:~$ sudo /etc/init.d/kamailio restart
>>>>
>>>>I have attached the log file.
>>>>
>>>>Many thanks for your help.
>>>>
>>>>Regards,
>>>>
>>>>Maedot
>>>>
>>>> 
>>>> From: Sammy Govind <govoiper at gmail.com>
>>>>To: miconda at gmail.com; SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List <sr-users at lists.sip-router.org> 
>>>>Sent: Tuesday, January 3, 2012 2:04 PM
>>>>Subject: Re: [SR-Users] RTPproxy on Kamailio 3.2.1 difficulty.
>>>>
>>>>
>>>>
>>>>Hi,
>>>>
>>>>
>>>>I had a good laugh when I read the reply, but going through the whole thread again I found this:
>>>>" It displays the same message even when I replace ADDR_IPV4 and ADDR_IPV6 with IP addresses. " 
>>>>
>>>>
>>>>So there _IS_ some problem here.
>>>>
>>>>
>>>>Nuno, can you please copy paste the exact command which you executing, plus paste the logs,
>>>>
>>>>
>>>>--
>>>>Regards, 
>>>>Sammy.
>>>>
>>>>
>>>>On Tue, Jan 3, 2012 at 2:22 PM, Daniel-Constantin Mierla <miconda at gmail.com> wrote:
>>>>
>>>>Hello,
>>>>>
>>>>>the ADDR_IPV4 and ADDR_IPV6 have to be replaced with real IP
    addresses that you have on the system runnin RTPProxy.
>>>>>
>>>>>Cheers,
>>>>>Daniel
>>>>>
>>>>>
>>>>>On 1/3/12 8:56 AM, nunu abe wrote: 
>>>>>Dear Daniel,  
>>>>>>Greetings and Happy New year to you all! I would like to thank you very much for your detailed and well structured tutorials on Kamailio. I am resending this email as I sent the earlier one before I was a member of the mailing list and I thought it may have been sent to the spam folder. If not then, I apologize for double posting.  
>>>>>>I was trying to design a similar scenario like the one " Run your own SIP VoIP service on both IPv4 and IPv6 " as explained on Asipto web-page(http://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6). However I ran into difficulties with rtpproxy. The proxy is not routing media packets as it should. I followed the instruction regarding the kamailio.cfg file and edited the necessary lines according to my settings. I think my problem comes from setting up the rtpproxy.  
>>>>>>1. I edited the /etc/default/rtpproxy file. i.e. I uncommented the line - CONTROL_SOCK="unix:/var/run/rtpproxy/rtpproxy.sock"  
>>>>>>2. I started the rtpproxy with this command: rtpproxy -F -l ADDR_IPV4 -6 /ADDR_IPV6 . However, after this command the system returns the message : rtpproxy: setbindhost: No address associated with hostname 
>>>>>>It displays the same message even when I replace ADDR_IPV4 and ADDR_IPV6 with IP addresses. 
>>>>>>  
>>>>>>3. I have also tried using the udp socket:- CONTROL_SOCK=udp:127.0.0.1:22222, of course I have replaced the unix socket by this udp socket in the kamilio.cfg file.   
>>>>>>So my question is, what did I do wrong with the settings that SIP messages are traversing normal from IPv4 client to IPv6 client and vice versa but media files(RTP packets) are not? The rtpproxy receives the media files from one client but fails to forward them to the other client.   
>>>>>>Thanks for your help.   
>>>>>>Maedot  
>>>>>> 
>>>>>>
>>>>>>_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users at lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>>
>>>>>-- 
Daniel-Constantin Mierla -- http://www.asipto.com http://linkedin.com/in/miconda -- http://twitter.com/miconda  
>>>>>_______________________________________________
>>>>>SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>>>sr-users at lists.sip-router.org
>>>>>http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>>
>>>>>
>>>> 
>>>>_______________________________________________
>>>>SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>>sr-users at lists.sip-router.org
>>>>http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>>   
>>>>
>>>>_______________________________________________
>>>>SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>>sr-users at lists.sip-router.org
>>>>http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>> 
>>>
>>>  
>>>_______________________________________________
>>>SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>sr-users at lists.sip-router.org
>>>http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>> 
> 
>
>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20120109/f59259ff/attachment-0001.htm>


More information about the sr-users mailing list