[SR-Users] best way to start kamailio at boot

Uri Shacked ushacked at gmail.com
Sun Feb 5 09:26:46 CET 2012


Hi,

any help will be graet....


* hi,
*>*
*>* when i moved the /etc/init.d/kamailio file. kamailio did not start at
boot.
*>* now, i set the debug level to 4 and run kamailio in both ways.
*>*
*>* 1. "/etc/init.d/kamailio start"
*>*
*  the resault was :

*Feb  1 19:59:04 net-ivr-KamIN-J1 kamailio: DEBUG: <core>
[mem/q_malloc.c:202]: qm_malloc_init: QM_OPTIMIZE=16384, /ROUNDTO=2048
Feb  1 19:59:04 net-ivr-KamIN-J1 kamailio: DEBUG: <core>
[mem/q_malloc.c:204]: qm_malloc_init: QM_HASH_SIZE=2099, qm_block
size=218344
Feb  1 19:59:04 net-ivr-KamIN-J1 kamailio: DEBUG: <core>
[mem/q_malloc.c:205]: qm_malloc_init(0x7f1cf585b000, 2147483648),
start=0x7f1cf585b000
Feb  1 19:59:04 net-ivr-KamIN-J1 kamailio: DEBUG: <core>
[mem/q_malloc.c:213]: qm_malloc_init: size= 2147483648, init_overhead=218440
Feb  1 19:59:04 net-ivr-KamIN-J1 kamailio: DEBUG: <core>
[mem/shm_mem.c:203]: shm_mem_init: success*

>*
*>* you can see the shm_mem size is 2048Mb.
*>*
*
2."kamailio"
the resault was :

*Feb  1 19:56:50 net-ivr-KamIN-J1 kamailio: DEBUG: <core>
[mem/q_malloc.c:202]: qm_malloc_init: QM_OPTIMIZE=16384, /ROUNDTO=2048
Feb  1 19:56:50 net-ivr-KamIN-J1 kamailio: DEBUG: <core>
[mem/q_malloc.c:204]: qm_malloc_init: QM_HASH_SIZE=2099, qm_block
size=218344
Feb  1 19:56:50 net-ivr-KamIN-J1 kamailio: DEBUG: <core>
[mem/q_malloc.c:205]: qm_malloc_init(0x7f8618310000, 33554432),
start=0x7f8618310000
Feb  1 19:56:50 net-ivr-KamIN-J1 kamailio: DEBUG: <core>
[mem/q_malloc.c:213]: qm_malloc_init: size= 33554432, init_overhead=218440
Feb  1 19:56:50 net-ivr-KamIN-J1 kamailio: DEBUG: <core>
[mem/shm_mem.c:203]: shm_mem_init: success*
**
the resault is 32Mb.

any ideas?


>*
*>* On Wed, Feb 1, 2012 at 5:01 PM, Jason Penton <jason.penton at
smilecoms.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
>wrote:
*>*
*>>* I am not familiar with Centos but I suspect there is another script
being
*>>* run from somewhere. What I would do is move the /etc/init.d/kamailio
script
*>>* somewhere safe (your home directory for eg). Then reboot and see if
*>>* kamailio still starts - if it does you need to find out whihc script is
*>>* being called and where it is.
*>>*
*>>* If you are not running X by default you are prob in runlevel 3. If you
*>>* are running X, then it will be 5. check where you runlevel scripts are
*>>* pointing. e.g.
*>>*
*>>* ls -al /etc/rc3.d/SXXkamailio (X = [0-9])
*>>*
*>>* Cheers
*>>* Jason
*>>*
*>>*  On Wed, Feb 1, 2012 at 4:26 PM, Uri Shacked <uri.shacked at
gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
>wrote:
*>>*
*>>>*  Hi,
*>>>*
*>>>* when i reboot the machine, it starts with 32Mb and i do not understand
*>>>* why...
*>>>* so, does it use a startup file that i am not familiar with?
*>>>* what is the appropriate runlevel? how do i set it and where?
*>>>*
*>>>* thanks,
*>>>* Uri
*>>>*
*>>>*
*>>>* >Hi Sammy,
*>>>* >
*>>>* >When you use the init script, it is starting Kamailio with the
correct
*>>>* >arguments to get the environment you wish (-m 2048 probably). If
*>>>* however,
*>>>* >you just call kamailio these args are not there. Im not sure why you
are
*>>>* >running with kamailio command directly. Why don't you add your init
*>>>* script
*>>>* >to the appropriate runlevel for auto startup?
*>>>* >
*>>>* >Cheers
*>>>* >Jason
*>>>*
*>>>* On Wed, Feb 1, 2012 at 3:06 PM, Uri Shacked <ushacked at gmail.com<
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>
*>>>* wrote:
*>>>*
*>>>* >* Hi again....
*>>>* *>*
*>>>* *>* i installed kamailio 3.2.2 today.
*>>>* *>* i used the chkconfig tool to get kamailio run at boot.
*>>>* *>* i edited both /etc/init.d/kamailio and /etc/default/kamailio files
*>>>* to run
*>>>* *>* with 2048Mg of memory.
*>>>* *>* now, when i run /etc/init.d/kamailio start, it starts with the
right
*>>>* *>* amount of memory.
*>>>* *>* when i rum "kamailio" only, it starts with 32Mb....
*>>>* *>*
*>>>* *>*  i use centos 6.2 64bit.
*>>>* *>* any ideas?
*>>>* *>*
*>>>* *>*
*>>>* *>*
*>>>* *>*
*>>>* *>*
*>>>* *>* On Tue, Oct 25, 2011 at 1:18 PM, Uri Shacked <ushacked at
gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>
*>>>* wrote:
*>>>* *>*
*>>>* *>>* Hi.
*>>>* *>>* I already checked it all. The kamailio start and stop command did
*>>>* not
*>>>* *>>* work. The init script i used was for debian. Now i use another
*>>>* script,
*>>>* *>>* for centos. It works. I add the kamailio proccess with chkconfig
*>>>* tool.
*>>>* *>>* Thanks.
*>>>* *>>*
*>>>* *>>* On 10/25/11, Sammy Govind <govoiper at gmail.com<
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>
*>>>* wrote:
*>>>* *>>* > Thanks Alex,
*>>>* *>>* >
*>>>* *>>* > Hey Uri, can you check if you've /etc/init.d/kamailio file
*>>>* exists - open
*>>>* *>>* > that file if exists and cross verify few parameters.
*>>>* *>>* > Few of these are as follows
*>>>* *>>* >
*>>>* *>>* > PATH=/sbin:/bin:/usr/sbin:/usr/bin
*>>>* *>>* > DAEMON=*/usr/local/sbin/kamailio*
*>>>* *>>* > NAME=kamailio
*>>>* *>>* > DESC=kamailio
*>>>* *>>* > HOMEDIR=/var/run/
*>>>* *>>* > *PIDFILE*=$HOMEDIR/$NAME.pid
*>>>* *>>* > DEFAULTS=*/etc/default/kamailio.default*
*>>>* *>>*  > RUN_KAMAILIO=yes
*>>>* *>>* >
*>>>* *>>* > Make sure /etc/default/kamailio.default file exits. here are
the
*>>>* *>>* contents of
*>>>* *>>* > my file.
*>>>* *>>* >
*>>>* *>>* > RUN_KAMAILIO=yes
*>>>* *>>* > USER=kamailio
*>>>* *>>* > GROUP=kamailio
*>>>* *>>* > MEMORY=64
*>>>* *>>* > DUMP_CORE=no
*>>>* *>>* >
*>>>* *>>* > On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion <
*>>>* *>>* > klaus.mailinglists at pernau.at<
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>
*>>>* wrote:
*>>>* *>>* >
*>>>* *>>* >> Test the startupscript if they work:
*>>>* *>>* >>
*>>>* *>>* >> /etc/init.d/kamailio start
*>>>* *>>* >> /etc/init.d/kamailio stop
*>>>* *>>* >>
*>>>* *>>* >> If this works, then make sure to have proper symlinks from the
*>>>* *>>* >> corresponding runlevel to the startup script. Do it manually
or
*>>>* use the
*>>>* *>>* >> chkconfig tool.
*>>>* *>>* >>
*>>>* *>>* >> klaus
*>>>* *>>* >>
*>>>* *>>* >>
*>>>* *>>* >> On 24.10.2011 08:00, Uri Shacked wrote:
*>>>* *>>* >>
*>>>* *>>* >>> hi again,
*>>>* *>>* >>> i found out that on my centos 5.4 the command
*>>>* start-stop-daemon that
*>>>* *>>* the
*>>>* *>>* >>> /etc/init.d/kamailio uses is not recognized.
*>>>* *>>* >>> it is kamailio3.2 any ideas?
*>>>* *>>* >>>
*>>>* *>>* >>>
*>>>* *>>* >>> On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked at
*>>>* gmail.com<
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
*>>>* *>>* >>> <mailto:ushacked at gmail.com<
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>>
*>>>* wrote:
*>>>* *>>* >>>
*>>>* *>>* >>>    Hi,
*>>>* *>>* >>>    what is the best way to start kamailio at boot?
*>>>* *>>* >>>    the example in the install is not working for me....
*>>>* *>>* >>>
*>>>* *>>* >>>
*>>>* *
*>>>*
*>>*
*>>* This email is subject to the disclaimer of Smile Communications (PTY)
Ltd. at http://www.smilecoms.com/disclaimer
*>>*
*>>*
*>*
*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20120205/75a147ee/attachment.htm>


More information about the sr-users mailing list