[SR-Users] best way to start kamailio at boot

[Jason Penton]

I am not familiar with Centos but I suspect there is another script being
run from somewhere. What I would do is move the /etc/init.d/kamailio script
somewhere safe (your home directory for eg). Then reboot and see if
kamailio still starts - if it does you need to find out whihc script is
being called and where it is.

If you are not running X by default you are prob in runlevel 3. If you are
running X, then it will be 5. check where you runlevel scripts are
pointing. e.g.

ls -al /etc/rc3.d/SXXkamailio (X = [0-9])

Cheers
Jason

On Wed, Feb 1, 2012 at 4:26 PM, Uri Shacked <uri.shacked at gmail.com> wrote:

> Hi,
>
> when i reboot the machine, it starts with 32Mb and i do not understand
> why...
> so, does it use a startup file that i am not familiar with?
> what is the appropriate runlevel? how do i set it and where?
>
> thanks,
> Uri
>
>
> >Hi Sammy,
> >
> >When you use the init script, it is starting Kamailio with the correct
> >arguments to get the environment you wish (-m 2048 probably). If however,
> >you just call kamailio these args are not there. Im not sure why you are
> >running with kamailio command directly. Why don't you add your init script
> >to the appropriate runlevel for auto startup?
> >
> >Cheers
> >Jason
>
> On Wed, Feb 1, 2012 at 3:06 PM, Uri Shacked <ushacked at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>
> wrote:
>
> >* Hi again....
> *>*
> *>* i installed kamailio 3.2.2 today.
> *>* i used the chkconfig tool to get kamailio run at boot.
> *>* i edited both /etc/init.d/kamailio and /etc/default/kamailio files to
> run
> *>* with 2048Mg of memory.
> *>* now, when i run /etc/init.d/kamailio start, it starts with the right
> *>* amount of memory.
> *>* when i rum "kamailio" only, it starts with 32Mb....
> *>*
> *>*  i use centos 6.2 64bit.
> *>* any ideas?
> *>*
> *>*
> *>*
> *>*
> *>*
> *>* On Tue, Oct 25, 2011 at 1:18 PM, Uri Shacked <ushacked at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>
> wrote:
> *>*
> *>>* Hi.
> *>>* I already checked it all. The kamailio start and stop command did not
> *>>* work. The init script i used was for debian. Now i use another
> script,
> *>>* for centos. It works. I add the kamailio proccess with chkconfig
> tool.
> *>>* Thanks.
> *>>*
> *>>* On 10/25/11, Sammy Govind <govoiper at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>
> wrote:
> *>>* > Thanks Alex,
> *>>* >
> *>>* > Hey Uri, can you check if you've /etc/init.d/kamailio file exists
> - open
> *>>* > that file if exists and cross verify few parameters.
> *>>* > Few of these are as follows
> *>>* >
> *>>* > PATH=/sbin:/bin:/usr/sbin:/usr/bin
> *>>* > DAEMON=*/usr/local/sbin/kamailio*
> *>>* > NAME=kamailio
> *>>* > DESC=kamailio
> *>>* > HOMEDIR=/var/run/
> *>>* > *PIDFILE*=$HOMEDIR/$NAME.pid
> *>>* > DEFAULTS=*/etc/default/kamailio.default*
> *>>*  > RUN_KAMAILIO=yes
> *>>* >
> *>>* > Make sure /etc/default/kamailio.default file exits. here are the
> *>>* contents of
> *>>* > my file.
> *>>* >
> *>>* > RUN_KAMAILIO=yes
> *>>* > USER=kamailio
> *>>* > GROUP=kamailio
> *>>* > MEMORY=64
> *>>* > DUMP_CORE=no
> *>>* >
> *>>* > On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion <
> *>>* > klaus.mailinglists at pernau.at<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>
> wrote:
> *>>* >
> *>>* >> Test the startupscript if they work:
> *>>* >>
> *>>* >> /etc/init.d/kamailio start
> *>>* >> /etc/init.d/kamailio stop
> *>>* >>
> *>>* >> If this works, then make sure to have proper symlinks from the
> *>>* >> corresponding runlevel to the startup script. Do it manually or
> use the
> *>>* >> chkconfig tool.
> *>>* >>
> *>>* >> klaus
> *>>* >>
> *>>* >>
> *>>* >> On 24.10.2011 08:00, Uri Shacked wrote:
> *>>* >>
> *>>* >>> hi again,
> *>>* >>> i found out that on my centos 5.4 the command start-stop-daemon
> that
> *>>* the
> *>>* >>> /etc/init.d/kamailio uses is not recognized.
> *>>* >>> it is kamailio3.2 any ideas?
> *>>* >>>
> *>>* >>>
> *>>* >>> On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked at
> gmail.com <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
> *>>* >>> <mailto:ushacked at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>>
> wrote:
> *>>* >>>
> *>>* >>>    Hi,
> *>>* >>>    what is the best way to start kamailio at boot?
> *>>* >>>    the example in the install is not working for me....
> *>>* >>>
> *>>* >>>
> *
>

This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at http://www.smilecoms.com/disclaimer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20120201/7cfc89e8/attachment.htm>