[SR-Users] Remove m=video from SDP header

[phillman25]

Hi Daniel

Yes there is an empty line after P-hint header.
I will make a few tests as you suggested below to see whether its the
carrier.

Thanks
Phillip

On Tue, Aug 14, 2012 at 12:15 PM, Daniel-Constantin Mierla <
miconda at gmail.com> wrote:

>  Hello,
>
> the sdp looks ok, assuming that there is an empty line after P-hint header.
>
> Perhaps you should test with a sip phone to see if the call is ok with it,
> if yes, then you have to ask the carrier to give you details about why the
> call is not accepted.
>
> Cheers,
> DAniel
>
>
> On 8/13/12 9:52 AM, phillman25 wrote:
>
> Dear List
>
>  I am trying to remove specific lines from the following original SDP
> body:
>
>
>  Content-Type: application/sdp
> Content-Length: 406
>
>  v=0
> o=root 3048 3048 IN IP4 xxx.xxx.xxx.xxx
> s=session
> c=IN IP4 xxx.xxx.xxx.xxx
> b=CT:384
> t=0 0
> m=audio 11904 RTP/AVP 0 8 18 101
> a=rtpmap:0 PCMU/8000
> a=rtpmap:8 PCMA/8000
> a=rtpmap:18 G729/8000
> a=fmtp:18 annexb=no
> a=rtpmap:101 telephone-event/8000
> a=fmtp:101 0-16
> a=silenceSupp:off - - - -
> a=ptime:20
>  a=sendrecv
> m=video 11602 RTP/AVP 34 99
> a=rtpmap:34 H263/90000
> a=rtpmap:99 H264/90000
> a=sendrecv
>
>
>
>
>  I need to remove the following lines from the above SDP body as my
> International carrier does not support Video capabilities:
>
> m=video 15042 RTP/AVP 34 99
> a=rtpmap:34 H263/90000
> a=rtpmap:99 H264/90000
>
>
>
>  I used the following code in Kamailio config:
>
> if(has_body("application/sdp") && search_body("m=video")){
>
>                    subst_body('#m=video ([0-9]+) RTP/AVP (.*)$# #');
>
>                    subst_body('#a=rtpmap:34 (.*)$# #');
>
>                    subst_body('#a=rtpmap:99 (.*)$# #');
>
>                    subst_body('#a=sendrecv(.*)$# #');
>
>         }
>
>
>
>  Content-Type: application/sdp
> Content-Length: 325
> P-hint: outbound
> v=0
> o=root 3048 3048 IN IP4 xxx.xxx.xxx.xxx
>  s=session
> c=IN IP4 xxx.xxx.xxx.xxx
> b=CT:384
> t=0 0
> m=audio 11904 RTP/AVP 0 8 18 101
> a=rtpmap:0 PCMU/8000
> a=rtpmap:8 PCMA/8000
> a=rtpmap:18 G729/8000
> a=fmtp:18 annexb=no
> a=rtpmap:101 telephone-event/8000
> a=fmtp:101 0-16
> a=silenceSupp:off - - - -
> a=ptime:20
> a=sendrecv
>
>
>  As you can see the m=video body has been removed, however, calls are
> still failing. Is there something i have missed?
>
>  I am using Kamailio v3.2.2
>
>
>  Thanking you in advance!
>
>  Phillip
>
>
> --
> Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
> Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 - http://asipto.com/u/katu
> Kamailio Practical Workshop, Netherlands, Sep 10-12, 2012 - http://asipto.com/u/kpw
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20120814/06ea5621/attachment.htm>