[SR-Users] B2BUA issues

[phillman25]

Hello Alex

Will try with SEMS first, found something called sip:provider CE v2.4 from
http://www.sipwise.com/news/announcements/spce-v2_4-release/ if i'm not
mistaken, this seems to combine Kamailio with SEMS? Do you think that this
might be an easier installation rather than installing SEMS on its own as
it seems to provide more documentation?

Thanks again!



On Mon, Aug 6, 2012 at 1:33 PM, Alex Balashov <abalashov at evaristesys.com>wrote:

> The short answer to your latter question is: yes. Cisco media and PSTN
> gateways have never hairpinned SIP-to-SIP calls well, even when officially
> supported.
>
> Asterisk has a lower learning curve due to the abundance of information
> and tutorials, but SEMS would make more sense, since all you need is a
> signaling B2BUA.
>
>
>
>
> -- Alex
>
> --
> Sent from my Samsung mobile, and thus lacking in the refinement one might
> expect from a proper keyboard.
>
> Alex Balashov - Principal
> Evariste Systems LLC
> 235 E Ponce de Leon Ave
> Suite 106
> Decatur, GA 30030
> Tel: +1-678-954-0670
> Web: http://www.evaristesys.com/
>
> phillman25 <phillman25 at gmail.com> wrote:
> Hi Alex
>
> Thanks for your prompt reply.
>
> The PGW 2200 solution is used as our core PSTN gateway where its currently
> handling many SS7, H.323 and SIP interconnections. However, there are a few
> scenarios like the example described below, that the call is originating
> from Kamailio being sent to the PGW and then back to Kamailio for
> termination and this scenario doesn't seem to work.
>
> Do you think that by implementing SEMS or Asterisk in between the PGW and
> Kamailio could resolve this issue for these specific scenarios?
> From your experience what do you think would be a better solution?
>
> Thanks again!
> Phillip
>
> ========================
> Message: 2
> Date: Mon, 06 Aug 2012 04:26:28 -0400
> From: Alex Balashov <abalashov at evaristesys.com>
> Subject: Re: [SR-Users] B2BUA issues
> To: sr-users at lists.sip-router.org
> Message-ID: <501F7FB4.8040700 at evaristesys.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> What is the larger objective?  Are you using the PGW purely as a B2BUA?
>   If so, that's a colossally overblown waste of resources;  just use
> something like SEMS or Asterisk.
>
> On 08/06/2012 04:24 AM, phillman25 wrote:
>
> > Dear List
> >
> > I am trying to accomplish the following:
> >
> >
> > Asterisk PABX (192.168.10.189) ==> Kamailio(xxx.xxx.xxx.xxx)  ==> Cisco
> > PGW 2200 (PSTN gateway) (yyy.yyy.yyy.yyy) ==>
> > Kamailio(xxx.xxx.xxx.xxx) ==> Asterisk PABX (192.168.10.189)
> >
> > When trying the above scenario, the call is silent and drops after a few
> > seconds. In syslog i observe the following error:
> >
> > *ERROR: <core> [parser/parse_rr.c:84]: parse_rr(): Error while parsing
> > name-addr (sip:22030305 at 192.168.10.189:5060
> > <http://sip:22030305@192.168.10.189:5060>>)*
> >
> > Looking at the sip trace i see that his might be caused by the ACK
> > message received from the ASTERISK PABX? :
> >
> > ACK sip:22030305 at 192.168.10.189:5060
> > <http://sip:22030305@192.168.10.189:5060> SIP/2.0
> > Via: SIP/2.0/UDP 192.168.10.189:5060;branch=z9hG4bK3c80f516;rport
> > Route:
> > <sip:xxx.xxx.xxx.xxx;lr=on;ftag=as166b1eea;did=97b.
> 66623da5>,<sip:22030305@
> > yyy.yyy.yyy.yyy;pgw-call=call-55bc4>,<sip:xxx.xxx.xxx.xxx;
> lr=on;ftag=as166b1eea>
> > Max-Forwards: 70
> > From: "22498045" <sip:22498045 at 192.168.10.189
> > <mailto:sip%3A22498045 at 192.168.10.189>>;tag=as166b1eea
> > To: <sip:22030305 at xxx.xxx.xxx.xxx>;tag=as6d578713
> > Contact: <sip:22498045 at 192.168.10.189:5060
> > <http://sip:22498045@192.168.10.189:5060>>
> > Call-ID: 5e2d61160bd1bec9214e2d7d04e5a778 at 192.168.10.189:5060
> > <http://5e2d61160bd1bec9214e2d7d04e5a778@192.168.10.189:5060>
> > CSeq: 102 ACK
> > User-Agent: FPBX-2.8.1(1.8.12.0)
> > Content-Length: 0
> >
> >
> > After contacting Cisco they informed us that issue is cause by B2BUA
> > from our current version of Cisco PGW 2200 that doesn't support this
> > feature. Is there a module, solution that i can implement on Kamailio
> > that could temporarily resolve this issue?
> >
> > Thanking you in advance.
> >
> > Phillip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20120806/04724808/attachment-0001.htm>