[SR-Users] Fwd: configuration
Daniel-Constantin Mierla
miconda at gmail.com
Tue Sep 13 09:04:51 CEST 2011
Hello,
On 9/12/11 4:14 PM, neili ma wrote:
> Hello,
>
> Thanks a lot for your advice, I found and solved the problem thanks to
> the debugger, actually the problem was with
>
> modparam("auth_db",
> "db_url","mysql://openser:openserrw@localhost/openser")
>
> I just had to change localhost to my locationserver IP and the problem
> was solved :), thanks again.
good that you find it. Don't forget to cc the mailing list always so
people reading the thread (archive later) see the conclusion -- it can
help many others running on same situation.
Cheers,
Daniel
>
> Sincerely,
> Neili
>
>
> 2011/9/12 Daniel-Constantin Mierla <miconda at gmail.com
> <mailto:miconda at gmail.com>>
>
> Hello,
>
> you have another group of actions that can send 401 Unauthorized:
>
>
> if (!check_to()) {
> sl_send_reply("401", "Unauthorized");
> exit;
> }
>
> You can either run with debug=4 and watch the syslog to see some
> hints in messages where it fires this 401, or use debugger module
> with cfgtrace option set and you see the execution path of the
> config in the logs.
>
> If you send here the ngrep of such REGISTER and the reply we can
> spot what could be the situation for 401.
>
> Cheers,
> Daniel
>
>
> On 9/11/11 9:18 PM, neili ma wrote:
>> Hello sr-users,
>>
>> I'm new using kamailio open source, and I would like to ask for help.
>>
>> My version is 3.1.4 and I am trying to configure 3 servers, one
>> with proxy, one with registrar and one with location server.
>>
>> My problem is when I try to send a register message it returns an
>> error "401 Unauthorized", I know the error is in the fuction
>> www_authorize("10.254.239.7", "subscriber") but I don't know how
>> to solve it, for me it seems correct the parameters.
>>
>> Below I have attatched the proxy and registrar relevant route
>> code for my problem, and the IPs for proxy an registrar are:
>> 10.254.239.7-----------10.254.239.8
>>
>> If someone can help me, I will be gratefull. Thanks in advance.
>>
>> ####REGISTRAR CODE
>>
>> route{
>>
>> # initial sanity checks -- too long messages
>> if (msg:len >= 2048 ) {
>> sl_send_reply("513", "Message too big");
>> exit;
>> };
>>
>> if (!uri==myself) {
>> sl_send_reply("400", "Bad destination, only
>> register messages de$
>> exit;
>> };
>>
>> # the only valid message for the registrar is the register
>> message
>> # other messages are answered with an error message
>> if (uri==myself) {
>>
>> if (method=="REGISTER") {
>>
>> sl_send_reply("100", "Trying");
>>
>> if (!www_authorize("10.254.239.7", "subscriber")) {
>> www_challenge("10.254.239.7", "1");
>> exit;
>> };
>>
>> if (!check_to()) {
>> sl_send_reply("401", "Unauthorized");
>> exit;
>> };
>>
>> consume_credentials();
>> if(!save("location")) {
>> sl_reply_error();
>> };
>> exit;
>> } else {
>> sl_send_reply("403", "Forbidden");
>> exit;
>> };
>> };
>> }
>>
>> #########PROXY CODE
>>
>> if (method=="ACK") {
>> route(1);
>> exit;
>> } if (method=="INVITE") {
>> route(3);
>> exit;
>> } else if (method=="REGISTER") {
>> route(2);
>> exit;
>> };
>>
>> lookup("aliases");
>> if (!uri==myself) {
>> route(1);
>> };
>>
>> route[2] {
>> #rewrinting the host allows the registrar to know that the
>> message is de$
>>
>> rewritehost("10.254.239.8");
>> if(!t_relay()) {
>> sl_reply_error();
>> };
>> exit;
>> }
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla --http://www.asipto.com
> Kamailio Advanced Training, Oct 10-13, Berlin:http://asipto.com/u/kat
> http://linkedin.com/in/miconda -- http://twitter.com/miconda
>
>
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Oct 10-13, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20110913/5c6a84f6/attachment-0001.htm>
More information about the sr-users
mailing list