[SR-Users] Reactivating a failed dispatcher destination

[Lee Archer]

Hi Carsten, I see the INFO requests on the target server and the packets being sent and received on the kamailio server.  Logs aren't showing me anything, even in debug mode.

Regards

Lee

-----Original Message-----
From: sr-users-bounces at lists.sip-router.org [mailto:sr-users-bounces at lists.sip-router.org] On Behalf Of Carsten Bock
Sent: 20 May 2011 09:40
To: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - UsersMailing List
Subject: Re: [SR-Users] Reactivating a failed dispatcher destination

Hi,

do you see any outgoing "INFO" Requests?
Do you see anything in the logs?

Carsten

2011/5/20 Lee Archer <Lee.Archer at thebigword.com>:
> Hi Daniel, I can see the gateway flagged as P after so many failed 
> attempts but when I bring the server back up I can see the pings being 
> received by the server but Kamailio still has a P against the 
> dispatcher dump.  The server is definitely working and pings are getting through.
>
>
>
> SET:: 443012572
>
>         URI:: sip:172.16.7.124:5060 flag=A
>
> SET:: 443012571
>
>         URI:: sip:172.16.7.122:5060 flag=P
>
> SET:: 443012570
>
>         URI:: sip:172.16.7.122:5060 flag=P
>
>
>
> Hi Carsten, I am loading dispatcher after tm.
>
>
>
> My settings for this are
>
>
>
> modparam("dispatcher", "flags", 2)
>
> modparam("dispatcher", "ds_ping_interval", 10)
>
> modparam("dispatcher", "ds_probing_threshhold", 3)
>
> modparam("dispatcher", "ds_probing_mode", 1)
>
> modparam("dispatcher", "ds_ping_method", "INFO").
>
>
>
> Thanks for help guys.
>
>
>
> Regards
>
>
>
> Lee
>
>
>
> From: Daniel-Constantin Mierla [mailto:miconda at gmail.com]
> Sent: 20 May 2011 09:06
> To: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - 
> Users Mailing List
> Cc: Lee Archer
> Subject: Re: [SR-Users] Reactivating a failed dispatcher destination
>
>
>
> On 5/19/11 4:05 PM, Lee Archer wrote:
>
> Hi all I wonder if someone can help by pointing me in the right direction.
> I have dispatcher set to ping and set any failed gateways to probing 
> but how do you get them out of this state when they start working 
> again?  I have run some tests and I must be missing something  as 
> active servers seem to stay in probing mode.
>
> I am using Kamailio 3.0.4.
>
> isn't pinging going on even after setting it inactive destination and 
> as soon as it becomes online will mark it active again?
>
> Administrative choice is to use mi/rpc command:
>
> kamctl fifo ds_set_state ...
>
> http://kamailio.org/docs/modules/stable/modules_k/dispatcher.html#id28
> 07032
>
> Cheers,
> Daniel
>
> --
>
> Daniel-Constantin Mierla -- http://www.asipto.com
>
> http://linkedin.com/in/miconda -- http://twitter.com/miconda
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing 
> list sr-users at lists.sip-router.org 
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>



--
Carsten Bock
http://www.ng-voice.com
mailto:carsten at ng-voice.com

Schomburgstr. 80
22767 Hamburg
Germany

Mobile +49 179 2021244
Office +49 40 34927219
Fax +49 40 34927220

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users at lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users