[SR-Users] nathelper-module and sdp offer in 200 OK

[Ovidiu Sas]

Add some logs (print the message that you are processing and the rtp
command that you are issuing).
That should help you in troubleshooting your scenario.

Regards,
Ovidiu Sas

On Thu, Feb 10, 2011 at 4:55 AM, Emil Kroymann <emil.kroymann at isaco.de> wrote:
> Hi,
>
> yeah, the script does call rtp_offer for 200 OK and rtp_answer for ACK.
> So, no problem there.
>
> Emil
>
> Am Thu, 10 Feb 2011 09:46:04 +0100
> schrieb Carsten Bock <lists at bock.info>:
>
>> Hi,
>>
>> just a hint: If you use rtpoffer/answer for SDP in 200ojk/ACK, the
>> SDP-Offer is in the 200 OK, so you need to call "rtp_offer" for the
>> 200 OK instead of the usual "rtp_answer" for the 200 OK. The ACK/SDP
>> contains then the rtp_answer.
>> Works like a charm for me....
>>
>> Carsten
>>
>> 2011/2/10 Emil Kroymann <emil.kroymann at isaco.de>:
>> > When I checked the code of the nathelper module that we are using,
>> > it didn't seem to be the case, that to and from tags are switched
>> > for the ACK request. Maybe, something has been changed after the
>> > point we checked out sip-router. When was this code last changed?
>> >
>> > Am Wed, 9 Feb 2011 12:51:29 -0500
>> > schrieb Ovidiu Sas <osas at voipembedded.com>:
>> >
>> >> The code seems to be correct.  The to and from tags are switched
>> >> for:
>> >>  - reply with offer (200ok with first SDP)
>> >>  - request with answer (ACK with second SDP)
>> >>
>> >> Are you sure that you are properly invoking offer/answer rtpproxy
>> >> functions?
>> >>
>> >>
>> >> Regards,
>> >> Ovidiu Sas
>> >>
>> >> On Wed, Feb 9, 2011 at 11:48 AM, Emil Kroymann
>> >> <emil.kroymann at isaco.de> wrote:
>> >> > Hi,
>> >> >
>> >> > We recently had a problem with the nathelper module and rtpproxy
>> >> > in a scenario where the SDP offer is sent only in the 200 OK. We
>> >> > use sip-router 3.1 and rtp-proxy from git master. The sip-router
>> >> > configuration uses the rtpproxy_offer() and rtpproxy_answer()
>> >> > functions in appropriate places. The problem is, that the
>> >> > arguments sent to the rtpproxy, when the ACK with the sdp answer
>> >> > arrives, seems to be not in the order, that rtpproxy expects.
>> >> >
>> >> > On the 200 OK, the nathelper module sends callid, to-tag,
>> >> > from-tag to rtpproxy. On the ACK, the nathelper module sends
>> >> > callid, from-tag, to-tag (with different command prefixes, of
>> >> > course, but I cannot remember them atm). The version of rtpproxy
>> >> > that we are using seems to expect, that the order of arguments
>> >> > sent on the ACK request is the same as on the 200 OK.
>> >> >
>> >> > My question: are there any module parameters, to correct this
>> >> > behaviour?
>> >> >
>> >> > Regards,
>> >> >
>> >> > Emil
>> >> > --
>> >> > Emil Kroymann
>> >> > VoIP Services Engineer
>> >> >
>> >> > Email: emil.kroymann at isaco.de
>> >> > Tel: +49-30-203899885
>> >> >
>> >> > ISACO GmbH
>> >> > Kurfürstenstraße 79
>> >> > 10787 Berlin
>> >> > Germany
>> >> >
>> >> > Amtsgericht Charlottenburg, HRB 112464B
>> >> > Geschäftsführer: Daniel Frommherz
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
>> >> > mailing list sr-users at lists.sip-router.org
>> >> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>> >> >
>> >> >
>> >>
>> >
>> >
>> >
>> > --
>> > Emil Kroymann
>> > VoIP Services Engineer
>> >
>> > Email: emil.kroymann at isaco.de
>> > Tel: +49-30-203899885
>> > Mobile: +49-176-38389303
>> >
>> > ISACO GmbH
>> > Kurfürstenstraße 79
>> > 10787 Berlin
>> > Germany
>> >
>> > Amtsgericht Charlottenburg, HRB 112464B
>> > Geschäftsführer: Daniel Frommherz
>> >
>> >
>> > _______________________________________________
>> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>> > list sr-users at lists.sip-router.org
>> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>> >
>> >
>>
>>
>>
>
>
>
> --
> Emil Kroymann
> VoIP Services Engineer
>
> Email: emil.kroymann at isaco.de
> Tel: +49-30-203899885
> Mobile: +49-176-38389303
>
> ISACO GmbH
> Kurfürstenstraße 79
> 10787 Berlin
> Germany
>
> Amtsgericht Charlottenburg, HRB 112464B
> Geschäftsführer: Daniel Frommherz
>
>