[SR-Users] commands out of sync you can't run this command now

Daniel-Constantin Mierla miconda at gmail.com
Tue Dec 13 14:06:56 CET 2011


I cannot see any DEBUG messages, are you sure the debug=3 in your config 
and you dont have other -d command line parameters?

Cheers,
Daniel

On 12/13/11 12:58 PM, MingHon wrote:
> Hi,
>
> the attachment was 2mb i remove it from approval. i did sentto ur 
> email too..
>
> anyway i attached the file with 7 zip.. reduced to 60k now..
>
> -- 
> Regards,
>
> MingHon
>
>
> On Tue, Dec 13, 2011 at 7:00 PM, Daniel-Constantin Mierla 
> <miconda at gmail.com <mailto:miconda at gmail.com>> wrote:
>
>     Hello,
>
>     have you sent them to me or to mailing list? On the mailing list I
>     could not find an attachment, also I didn't get an email on myself
>     only.
>
>     Cheers,
>     Daniel
>
>
>     On 12/13/11 10:39 AM, MingHon wrote:
>>
>>         Hello,
>>
>>         i attached the log/messages files please take a look...
>>
>>         Cheers,
>>         MingHon
>>
>>
>>         On Tue, Dec 13, 2011 at 4:58 PM, Daniel-Constantin Mierla
>>         <miconda at gmail.com <mailto:miconda at gmail.com>> wrote:
>>
>>             Hello,
>>
>>
>>             On 12/13/11 9:24 AM, Daniel-Constantin Mierla wrote:
>>>             Hello,
>>>
>>>             are you using any private developed module or extension?
>>>             There seems to be a buffer overflow as well.
>>>
>>>             if you don't have any private extension, can you send
>>>             directly to me the entire log from start of kamailio
>>>             with following global parameters:
>>>
>>>             debug=3
>>>             memlog=4
>>>             memdbg=4
>>             errata - the values of the global parameters were wrong
>>             -- actually the above three lines should be:
>>
>>             debug=3
>>             memlog=1
>>             memdbg=1
>>
>>             Cheers,
>>             Daniel
>>
>>
>>>
>>>             Cheers,
>>>             Daniel
>>>
>>>             On 12/13/11 8:51 AM, MingHon wrote:
>>>>             im using version: kamailio 3.1.4 (i386/linux)
>>>>             after kamctl start it return
>>>>             INFO: Starting Kamailio :
>>>>             INFO: started (pid: 3589)
>>>>
>>>>             ps aux | grep 3589
>>>>             root      3609  0.0  0.0   4012   704 pts/0    S+  
>>>>             15:48   0:00 grep 3589
>>>>
>>>>             here is the log message.
>>>>
>>>>             Dec 13 15:43:41 hostname
>>>>             /usr/local/sbin/kamailio[3589]: ERROR: db_mysql
>>>>             [km_dbase.c:120]: driver error on query: Commands out
>>>>             of sync; you can't run this command now
>>>>             Dec 13
>>>>             15:43:41 hostname /usr/local/sbin/kamailio[3589]:
>>>>             ERROR: <core> [db_query.c:101]: error while submitting
>>>>             query
>>>>             Dec 13
>>>>             15:43:41 hostname /usr/local/sbin/kamailio[3589]:
>>>>             ERROR: <core> [db.c:366]: error in db_query
>>>>             Dec 13
>>>>             15:43:41 hostname /usr/local/sbin/kamailio[3589]:
>>>>             ERROR: <core> [db.c:405]: querying version for table
>>>>             location
>>>>             Dec 13
>>>>             15:43:41 hostname /usr/local/sbin/kamailio[3589]:
>>>>             ERROR: usrloc [dlist.c:491]: error during table version
>>>>             check.
>>>>             Dec 13
>>>>             15:43:41 hostname /usr/local/sbin/kamailio[3589]: :
>>>>             <core> [mem/q_malloc.c:146]: BUG: qm_*: fragm.
>>>>             0x838b11c (address 0x838b134) end overwritten(0, 0)!
>>>>             Dec 13 15:43:41 hostname kamailio: ERROR: <core>
>>>>             [daemonize.c:307]: Main process exited before writing
>>>>             to pipe
>>>>
>>>>
>>>>
>>>>             On Tue, Dec 13, 2011 at 12:53 AM, Daniel-Constantin
>>>>             Mierla <miconda at gmail.com <mailto:miconda at gmail.com>>
>>>>             wrote:
>>>>
>>>>                 Hello,
>>>>
>>>>
>>>>                 On 12/12/11 4:09 PM, MingHon wrote:
>>>>>                 btw im using kamailio 3.1
>>>>
>>>>                 which one exactly? Just send output of 'kamailio -V'.
>>>>
>>>>                 Also, watch the log messages with debug=3 and get
>>>>                 the one related to the error messages to see which
>>>>                 module is executing that command.
>>>>
>>>>                 Cheers,
>>>>                 Daniel,
>>>>
>>>>>
>>>>>
>>>>>                 On Mon, Dec 12, 2011 at 11:08 PM, MingHon
>>>>>                 <gminghon at gmail.com <mailto:gminghon at gmail.com>>
>>>>>                 wrote:
>>>>>
>>>>>                     Hi List,
>>>>>
>>>>>                     im doing a fresh install, everything installed
>>>>>                     successfully but when
>>>>>
>>>>>                     i try to start kamailio with kamctl start i
>>>>>                     receive this error.
>>>>>
>>>>>                     when im using mysql 5.5 rpm version i get this
>>>>>                     error....
>>>>>
>>>>>                     if install with mysql 5.0 rpm i dont receive
>>>>>                     that error it run perfectly.
>>>>>
>>>>>                     is mysql 5.5 incompatible yet?
>>>>>
>>>>>                     Thanks,
>>>>>
>>>>>
>>>>>                     -- 
>>>>>                     Regards,
>>>>>
>>>>>                     MingHon
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>                 -- 
>>>>>                 Regards,
>>>>>
>>>>>                 MingHon
>>>>>
>>>>>
>>>>>                 _______________________________________________
>>>>>                 SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>>>                 sr-users at lists.sip-router.org  <mailto:sr-users at lists.sip-router.org>
>>>>>                 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>                 -- 
>>>>                 Daniel-Constantin Mierla --http://www.asipto.com
>>>>                 http://linkedin.com/in/miconda  -- http://twitter.com/miconda
>>>>
>>>>
>>>>
>>>>
>>>>             -- 
>>>>             Regards,
>>>>
>>>>             MingHon
>>>>
>>>>
>>>>             _______________________________________________
>>>>             SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>>             sr-users at lists.sip-router.org  <mailto:sr-users at lists.sip-router.org>
>>>>             http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>             -- 
>>>             Daniel-Constantin Mierla --http://www.asipto.com
>>>             http://linkedin.com/in/miconda  -- http://twitter.com/miconda
>>>
>>>
>>>             _______________________________________________
>>>             SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>             sr-users at lists.sip-router.org  <mailto:sr-users at lists.sip-router.org>
>>>             http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>             -- 
>>             Daniel-Constantin Mierla --http://www.asipto.com
>>             http://linkedin.com/in/miconda  -- http://twitter.com/miconda
>>
>>
>>
>>
>>         -- 
>>         Regards,
>>
>>         MingHon
>>
>>
>>
>>
>>     -- 
>>     Regards,
>>
>>     MingHon
>>
>>
>>     _______________________________________________
>>     SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>     sr-users at lists.sip-router.org  <mailto:sr-users at lists.sip-router.org>
>>     http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>     -- 
>     Daniel-Constantin Mierla --http://www.asipto.com
>     http://linkedin.com/in/miconda  -- http://twitter.com/miconda
>
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20111213/b16feca5/attachment-0001.htm>


More information about the sr-users mailing list