[SR-Users] set host as inactive and probing in dispatcher
Daniel-Constantin Mierla
miconda at gmail.com
Mon Dec 12 13:51:35 CET 2011
Hello,
On 12/12/11 1:35 PM, Uri Shacked wrote:
>
> thanks,
> since i am not so good with linux... :-( sorry....
> after doing GIT like :
> # git clone –depth 1 git://git.sip-router.org/sip-router <http://git.sip-router.org/sip-router> kamailio
> # cd kamailio
> # git checkout -b 3.2 origin/3.2
> # make FLAVOUR=kamailio cfg
> what do i do next?
> make install?
yes, make install. You can read a tutorial about installing kamailio 3.2
from git at:
* http://www.kamailio.org/wiki/install/3.2.x/git
Cheers,
Daniel
> On Mon, Dec 12, 2011 at 12:18 PM, Daniel-Constantin Mierla
> <miconda at gmail.com <mailto:miconda at gmail.com>> wrote:
>
> Hello,
>
> you have to upgrade to 3.2.1 (or use the latest git branch 3.2).
> The current keepalive mechanism was refactored a bit after the
> release of 3.2.0, as they were overlapping cases.
>
> Cheers,
> Daniel
>
>
> On 12/12/11 11:13 AM, Uri Shacked wrote:
>> version :
>> version: kamailio 3.2.0 (i386/linux) e19bb8
>> flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS,
>> USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM,
>> SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX,
>> FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER,
>> USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
>> ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN
>> 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB
>> poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
>> id: e19bb8
>> compiled on 18:43:11 Oct 24 2011 with gcc 4.1.2
>> and with log level 3 :
>> 13(11897) ERROR: <script>: OSPRPL is 408 now disable destination
>> 13(11897) ERROR: *** cfgtrace:
>> c=[/usr/local/etc/kamailio/kamailio.cfg] l=1266 a=26 n=ds_mark_dst
>> 13(11897) DEBUG: dispatcher [dispatch.c:1994]: mode [1] grp [47]
>> dst [sip:10.10.21.28]
>> 13(11897) ERROR: *** cfgtrace:
>> c=[/usr/local/etc/kamailio/kamailio.cfg] l=1267 a=26 n=xlog
>> 13(11897) ERROR: <script>: after disabling destination
>>
>> On Mon, Dec 12, 2011 at 11:14 AM, Daniel-Constantin Mierla
>> <miconda at gmail.com <mailto:miconda at gmail.com>> wrote:
>>
>> Hello,
>>
>> cn you give output of 'kamailio -V' and the log messages with
>> debug=3 in config file?
>>
>> Note that from the moment you set the gateway in some state
>> and you dump the list via mi, there can be keepalives that
>> change the state.
>>
>> Cheers,
>> Daniel
>>
>>
>> On 12/11/11 3:42 PM, Uri Shacked wrote:
>>> Hi,
>>> i tried to change the ds_probing_mode as well. it didn't do
>>> any good.
>>> i need the probing mode to be set to 1 anyway.
>>> so,
>>> any ideas?
>>> here is the cfg again:
>>> after the failure route i turn to this route
>>> "route[OSPRPLERR] {
>>> xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n");
>>> if($avp(OSPRPL)!=404) {
>>> xlog("$C(rg) OSPRPL is $avp(OSPRPL)*now disable
>>> destination* $C(xx)\n");
>>> ds_mark_dst("AP");
>>> xlog("$C(rg) *after disabling destination* $C(xx)\n");
>>> }"
>>> here is the log:
>>>
>>> 13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR
>>> sip:36264529 at 10.10.21.29 <mailto:sip%3A36264529 at 10.10.21.29>
>>> 13(5760) ERROR: *** cfgtrace:
>>> c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if
>>> 13(5760) ERROR: *** cfgtrace:
>>> c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog
>>> 13(5760) ERROR: <script>: OSPRPL is 408 *now disable
>>> destination
>>> *13(5760) ERROR: *** cfgtrace:
>>> c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26
>>> n=ds_mark_dst
>>> 13(5760) ERROR: *** cfgtrace:
>>> c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog
>>> 13(5760) ERROR: <script>: *after disabling destination*
>>>
>>> now i check the dispatcher list status:
>>> kamctl fifo ds_list
>>>
>>> SET:: 47
>>> URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4
>>> URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3
>>> URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2
>>> URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1
>>> SET:: 41
>>> URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4
>>> URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3
>>> URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1
>>> URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2
>>>
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>> --
>> Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/>
>> http://linkedin.com/in/miconda -- http://twitter.com/miconda
>>
>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org <mailto:sr-users at lists.sip-router.org>
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/>
> http://linkedin.com/in/miconda -- http://twitter.com/miconda
>
>
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20111212/5b5d6e37/attachment.htm>
More information about the sr-users
mailing list