[SR-Users] set host as inactive and probing in dispatcher

[Daniel-Constantin Mierla]

Hello,

you have to upgrade to 3.2.1 (or use the latest git branch 3.2). The 
current keepalive mechanism was refactored a bit after the release of 
3.2.0, as they were overlapping cases.

Cheers,
Daniel

On 12/12/11 11:13 AM, Uri Shacked wrote:
> version :
> version: kamailio 3.2.0 (i386/linux) e19bb8
> flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, 
> USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, 
> SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, 
> FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, 
> USE_DST_BLACKLIST, HAVE_RESOLV_RES
> ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, 
> MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB
> poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
> id: e19bb8
> compiled on 18:43:11 Oct 24 2011 with gcc 4.1.2
> and with log level 3 :
> 13(11897) ERROR: <script>:  OSPRPL is 408 now disable destination
> 13(11897) ERROR: *** cfgtrace: 
> c=[/usr/local/etc/kamailio/kamailio.cfg] l=1266 a=26 n=ds_mark_dst
> 13(11897) DEBUG: dispatcher [dispatch.c:1994]: mode [1] grp [47] dst 
> [sip:10.10.21.28]
> 13(11897) ERROR: *** cfgtrace: 
> c=[/usr/local/etc/kamailio/kamailio.cfg] l=1267 a=26 n=xlog
> 13(11897) ERROR: <script>:  after disabling destination
>
> On Mon, Dec 12, 2011 at 11:14 AM, Daniel-Constantin Mierla 
> <miconda at gmail.com <mailto:miconda at gmail.com>> wrote:
>
>     Hello,
>
>     cn you give output of 'kamailio -V' and the log messages with
>     debug=3 in config file?
>
>     Note that from the moment you set the gateway in some state and
>     you dump the list via mi, there can be keepalives that change the
>     state.
>
>     Cheers,
>     Daniel
>
>
>     On 12/11/11 3:42 PM, Uri Shacked wrote:
>>     Hi,
>>     i tried to change the ds_probing_mode as well. it didn't do any good.
>>     i need the probing mode to be set to 1 anyway.
>>     so,
>>     any ideas?
>>     here is the cfg again:
>>     after the failure route i turn to this route
>>     "route[OSPRPLERR] {
>>     xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n");
>>     if($avp(OSPRPL)!=404) {
>>      xlog("$C(rg) OSPRPL is $avp(OSPRPL)*now disable destination*
>>     $C(xx)\n");
>>      ds_mark_dst("AP");
>>      xlog("$C(rg) *after disabling destination* $C(xx)\n");
>>      }"
>>     here is the log:
>>
>>     13(5760) ERROR: <script>:  SCRIPT : in OSPRPLERR
>>     sip:36264529 at 10.10.21.29 <mailto:sip%3A36264529 at 10.10.21.29>
>>     13(5760) ERROR: *** cfgtrace:
>>     c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if
>>     13(5760) ERROR: *** cfgtrace:
>>     c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog
>>     13(5760) ERROR: <script>:  OSPRPL is 408 *now disable destination
>>     *13(5760) ERROR: *** cfgtrace:
>>     c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst
>>     13(5760) ERROR: *** cfgtrace:
>>     c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog
>>     13(5760) ERROR: <script>: *after disabling destination*
>>
>>     now i check the dispatcher list status:
>>     kamctl fifo ds_list
>>
>>     SET:: 47
>>             URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4
>>             URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3
>>             URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2
>>             URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1
>>     SET:: 41
>>             URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4
>>             URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3
>>             URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1
>>             URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2
>>
>>
>>     _______________________________________________
>>     SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>     sr-users at lists.sip-router.org  <mailto:sr-users at lists.sip-router.org>
>>     http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>     -- 
>     Daniel-Constantin Mierla --http://www.asipto.com  <http://www.asipto.com/>
>     http://linkedin.com/in/miconda  -- http://twitter.com/miconda
>
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20111212/a341ed2f/attachment.htm>