[SR-Users] set host as inactive and probing in dispatcher

Daniel-Constantin Mierla miconda at gmail.com
Mon Dec 12 10:14:58 CET 2011


Hello,

cn you give output of 'kamailio -V' and the log messages with debug=3 in 
config file?

Note that from the moment you set the gateway in some state and you dump 
the list via mi, there can be keepalives that change the state.

Cheers,
Daniel

On 12/11/11 3:42 PM, Uri Shacked wrote:
> Hi,
> i tried to change the ds_probing_mode as well. it didn't do any good.
> i need the probing mode to be set to 1 anyway.
> so,
> any ideas?
> here is the cfg again:
> after the failure route i turn to this route
> "route[OSPRPLERR] {
> xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n");
> if($avp(OSPRPL)!=404) {
>  xlog("$C(rg) OSPRPL is $avp(OSPRPL)*now disable destination* $C(xx)\n");
>  ds_mark_dst("AP");
>  xlog("$C(rg) *after disabling destination* $C(xx)\n");
>  }"
> here is the log:
>
> 13(5760) ERROR: <script>:  SCRIPT : in OSPRPLERR 
> sip:36264529 at 10.10.21.29 <mailto:sip%3A36264529 at 10.10.21.29>
> 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] 
> l=1264 a=17 n=if
> 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] 
> l=1259 a=26 n=xlog
> 13(5760) ERROR: <script>:  OSPRPL is 408 *now disable destination
> *13(5760) ERROR: *** cfgtrace: 
> c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst
> 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] 
> l=1261 a=26 n=xlog
> 13(5760) ERROR: <script>: *after disabling destination*
>
> now i check the dispatcher list status:
> kamctl fifo ds_list
>
> SET:: 47
>         URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4
>         URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3
>         URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2
>         URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1
> SET:: 41
>         URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4
>         URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3
>         URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1
>         URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20111212/2874bf90/attachment.htm>


More information about the sr-users mailing list