[SR-Users] "Create Certificates to be used with Kamailio" changes
Juha Heinanen
jh at tutpro.com
Thu Sep 30 17:57:42 CEST 2010
Andrei Pelinescu-Onciul writes:
> > enable_tls=1
> > tcp_async=no # do not include in 3.1
> > listen=udp:0.0.0.0:5060
> > listen=tcp:0.0.0.0:5060
> ^^^^^^^^ it should not be 0.0.0.0 but an actual IP.
> If you use 0.0.0.0 you _must_ set adevertised_adress or
> you will have some strange Vias && RRs.
>
> > listen=tls:0.0.0.0:5061 # not needed in 3.1
> ^^^^^^^^^^^^^^^^ - it's optional only if you have another
> listen which does not specify the protocol
> (e.g. listen=10.0.0.2:5060 or
> listen=10.0.0.2). In this case ser will
> listen on all protocols on the default
> port). I
> This is true also for 3.0 and at least for
> all ser versions.
ok, fixed.
> In general I use
> http://sip-router.org/docbook/sip-router/branch/master/modules/tls/tls.html#tls.certs_howto
> as a quick setup reminder.
i read that too, but it was not as easy to follow as the tuto.
-- juha
More information about the sr-users
mailing list