[Kamailio-Users] LCR module in Kamailio 3.0

[Denis Putyato]

root at ubuntutest:/kamailio# kamctl fifo which

500 command 'which' not available

root at ubuntutest:/kamailio#

 

From: Daniel-Constantin Mierla [mailto:miconda at gmail.com] 
Sent: Tuesday, January 26, 2010 2:55 PM
To: Denis Putyato
Cc: users at lists.kamailio.org
Subject: Re: [Kamailio-Users] LCR module in Kamailio 3.0

 



On 1/26/10 12:35 PM, Denis Putyato wrote: 

I do not use lcr routing in config (only gw table is used).

ok




Not in kamailio 1.5 nor 3.0. I use carrierroute (in 1.5) and now drouting
(in 3.0). 

By the way. Recently you helped me with drouting. Can I ask one more
question about this module?

When I try to do "kamctl fifo dr_reload" I receive "500 command 'dr_reload'
not available".


do:

kamctl fifo which

Should list available MI commands, is dr_reload there?

Cheers,
Daniel




 

 

From: Daniel-Constantin Mierla [mailto:miconda at gmail.com] 
Sent: Tuesday, January 26, 2010 12:43 PM
To: Denis Putyato
Cc: users at lists.kamailio.org
Subject: Re: [Kamailio-Users] LCR module in Kamailio 3.0

 



On 1/26/10 10:38 AM, Denis Putyato wrote: 

Daniel thank you. Now it's working


welcome! Be sure you understand the idea behind the instances. Not being a
user of lcr don't know exactly the internal architecture, so as I understood
from discussions on mailing lists, you can have more lcr instance on same
kamailio grouped under same value of lcr_id (many gws and lcr rules with
same lcr_id).

Cheers,
Daniel





 

From: Daniel-Constantin Mierla [mailto:miconda at gmail.com] 
Sent: Tuesday, January 26, 2010 12:31 PM
To: Denis Putyato
Cc: users at lists.kamailio.org
Subject: Re: [Kamailio-Users] LCR module in Kamailio 3.0

 

Hello,

On 1/26/10 7:33 AM, Denis Putyato wrote: 

Hello everybody!

 

I have a such problem with LCR module 

When I add a new gw in gw table via kamctl addgw or direct via mysql
command, never mind, after doing lcr reload, in memory loaded only gw with
lcr_id = 1.

All other gateways, with lcr_id > 1,  not loaded into memory, so I cannot
use them.

(After lcr reload I do lcr dump and only gateways whis lcr_id = 1 can be
seen)

 

Thank you for any help.

 

P.S. lcr table, where lcr_id is present too, is empty. It does not need for
processing in my kamailio. Only gw table is used.    

 

Kamailio 3.0 was installed from GIT.

maybe is related to lcr_count parameter:

http://kamailio.org/docs/modules/3.0.x/modules/lcr.html#id2495949

AFAIK, there were some changes in lcr by adding instances, which are hold in
lcr_id (gws to same instance have same id).

Cheers,
Daniel





-- 
Daniel-Constantin Mierla
* http://www.asipto.com/






-- 
Daniel-Constantin Mierla
* http://www.asipto.com/
 
 
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users at lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users





-- 
Daniel-Constantin Mierla
* http://www.asipto.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20100126/6f310009/attachment.htm>