[SR-Users] RLS issue
Daniel-Constantin Mierla
miconda at gmail.com
Fri Dec 24 11:03:13 CET 2010
Hello,
On 12/22/10 4:55 PM, Klaus Darilion wrote:
> 1. Kamailio will send the request to the address of the list member
> (normal DNS lookups).
>
> 2. If there is a problem with OpenIMS then you should ask the OpenIMS
> guys, we are not familiar with OpenIMS.
for sake of completion, openimscore is running now on the same core as
version 3.x, it has just some extra modules. So in regard to routing and
common modules, it the same thing.
Cheers,
Daniel
>
> regards
> klaus
>
> Am 22.12.2010 12:57, schrieb "Andrés S. García Ruiz":
>>
>> Thanks a lot for your response!
>>
>> I've been thinking about it and there's something abnormal. Firs, the
>> RLS is suppose to send the initial SUBSCRIBE to the S-CSCF instead of
>> sending it to the I-CSCF. Then, I don't know why the S-CSCF translates
>> the SUBSCRIBE URI (sip:testuser02 at open-ims.test) to
>> "sip:testuser01 at 155.54.190.245:8060;rinstance=9b7761b4bcaa4bd0". All the
>> routing is the default configuration of both cscfs and rls.
>>
>> How can I change the routing of the RLS in order it to send the
>> SUBSCRIBE messages to the S-CSCF?
>>
>> Here's the configuration file:
>> /
>> #!KAMAILIO
>>
>> #!ifdef ACCDB_COMMENT
>> ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
>> ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
>> ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
>> ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
>> ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
>> ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL
>> DEFAULT '';
>> ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL
>> DEFAULT '';
>> ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL
>> DEFAULT '';
>> ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL
>> DEFAULT '';
>> ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL
>> DEFAULT '';
>> #!endif
>>
>> ####### Defined Values #########
>>
>> #!define WITH_DEBUG
>> #!define WITH_AUTH
>> #!define WITH_MYSQL
>> #!define WITH_USRLOCDB
>> #!define WITH_PRESENCE
>> #!define WITH_XCAPSRV
>>
>>
>> # *** Value defines - IDs used later in config
>> #!ifdef WITH_MYSQL
>> # - database URL - used to connect to database server by modules such
>> # as: auth_db, acc, usrloc, a.s.o.
>> #!define DBURL "mysql://openser:openserrw@localhost/openser"
>> #!endif
>> #!ifdef WITH_MULTIDOMAIN
>> # - the value for 'use_domain' parameters
>> #!define MULTIDOMAIN 1
>> #!else
>> #!define MULTIDOMAIN 0
>> #!endif
>>
>> # - flags
>> # FLT_ - per transaction (message) flags
>> # FLB_ - per branch flags
>> #!define FLT_ACC 1
>> #!define FLT_ACCMISSED 2
>> #!define FLT_ACCFAILED 3
>> #!define FLT_NATS 5
>>
>> #!define FLB_NATB 6
>> #!define FLB_NATSIPPING 7
>>
>> ####### Global Parameters #########
>>
>> #!ifdef WITH_DEBUG
>> debug=4
>> log_stderror=yes
>> #!else
>> debug=2
>> log_stderror=no
>> #!endif
>>
>> memdbg=5
>> memlog=5
>>
>> log_facility=LOG_LOCAL0
>>
>> fork=yes
>> children=4
>>
>> /* uncomment the next line to disable TCP (default on) */
>> #disable_tcp=yes
>>
>>
>> /* uncomment the next line to disable the auto discovery of local
>> aliases
>> based on reverse DNS on IPs (default on) */
>> #auto_aliases=no
>>
>> /* add local domain aliases */
>> alias="open-ims.test"
>>
>> /* uncomment and configure the following line if you want Kamailio to
>> bind on a specific interface/port/proto (default bind on all
>> available) */
>> #listen=udp:10.0.0.10:5060
>>
>> /* port to listen to
>> * - can be specified more than once if needed to listen on many ports */
>> port=5060
>>
>> #!ifdef WITH_TLS
>> enable_tls=yes
>> #!endif
>>
>> #!ifdef WITH_XCAPSRV
>> tcp_accept_no_cl=yes
>> #!endif
>>
>> ####### Custom Parameters #########
>>
>> # These parameters can be modified runtime via RPC interface
>> # - see the documentation of 'cfg_rpc' module.
>> #
>> # Format: group.id = value 'desc' description
>> # Access: $sel(cfg_get.group.id) or @cfg_get.group.id
>> #
>>
>> #!ifdef WITH_PSTN
>> # PSTN GW Routing
>> #
>> # - pstn.gw_ip: valid IP or hostname as string value, example:
>> # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
>> #
>> # - by default is empty to avoid misrouting
>> pstn.gw_ip = "" desc "PSTN GW Address"
>> #!endif
>>
>>
>> ####### Modules Section ########
>>
>> # set paths to location of modules
>> #!ifdef LOCAL_TEST_RUN
>> mpath="modules_k:modules"
>> #!else
>> mpath="/usr/local/kamailio-3.1-xcap-rls/lib/kamailio/modules_k/:/usr/local/kamailio-3.1-xcap-rls/lib/kamailio/modules/"
>>
>> #!endif
>>
>> #!ifdef WITH_MYSQL
>> loadmodule "db_mysql.so"
>> #!endif
>>
>> loadmodule "mi_fifo.so"
>> loadmodule "kex.so"
>> loadmodule "tm.so"
>> loadmodule "tmx.so"
>> loadmodule "sl.so"
>> loadmodule "rr.so"
>> loadmodule "pv.so"
>> loadmodule "maxfwd.so"
>> loadmodule "usrloc.so"
>> loadmodule "registrar.so"
>> loadmodule "textops.so"
>> loadmodule "siputils.so"
>> loadmodule "xlog.so"
>> loadmodule "sanity.so"
>> loadmodule "ctl.so"
>> loadmodule "mi_rpc.so"
>> loadmodule "acc.so"
>> # loadmodule "pua_mi.so"
>> # loadmodule "pua_usrloc.so"
>>
>>
>> #!ifdef WITH_AUTH
>> loadmodule "auth.so"
>> loadmodule "auth_db.so"
>> #!ifdef WITH_IPAUTH
>> loadmodule "permissions.so"
>> #!endif
>> #!endif
>>
>> #!ifdef WITH_ALIASDB
>> loadmodule "alias_db.so"
>> #!endif
>>
>> #!ifdef WITH_MULTIDOMAIN
>> loadmodule "domain.so"
>> #!endif
>>
>> #!ifdef WITH_PRESENCE
>> loadmodule "presence.so"
>> loadmodule "presence_xml.so"
>> loadmodule "pua.so"
>> loadmodule "rls.so"
>> #!endif
>>
>> #!ifdef WITH_NAT
>> loadmodule "nathelper.so"
>> loadmodule "rtpproxy.so"
>> #!endif
>>
>> #!ifdef WITH_TLS
>> loadmodule "tls.so"
>> #!endif
>>
>> #!ifdef WITH_ANTIFLOOD
>> loadmodule "htable.so"
>> loadmodule "pike.so"
>> #!endif
>>
>> #!ifdef WITH_XMLRPC
>> loadmodule "xmlrpc.so"
>> #!endif
>>
>> #!ifdef WITH_XCAPSRV
>> loadmodule "xhttp.so"
>> loadmodule "xcap_server.so"
>> #!endif
>>
>> # ----------------- setting module-specific parameters ---------------
>>
>>
>> # ----- mi_fifo params -----
>> modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")
>>
>>
>> # ----- tm params -----
>> # auto-discard branches from previous serial forking leg
>> modparam("tm", "failure_reply_mode", 3)
>> # default retransmission timeout: 30sec
>> modparam("tm", "fr_timer", 30000)
>> # default invite retransmission timeout after 1xx: 120sec
>> modparam("tm", "fr_inv_timer", 120000)
>>
>>
>> # ----- rr params -----
>> # add value to ;lr param to cope with most of the UAs
>> modparam("rr", "enable_full_lr", 1)
>> # do not append from tag to the RR (no need for this script)
>> modparam("rr", "append_fromtag", 0)
>>
>>
>> # ----- registrar params -----
>> modparam("registrar", "method_filtering", 1)
>> /* uncomment the next line to disable parallel forking via location */
>> # modparam("registrar", "append_branches", 0)
>> /* uncomment the next line not to allow more than 10 contacts per AOR */
>> #modparam("registrar", "max_contacts", 10)
>>
>>
>> # ----- acc params -----
>> /* what special events should be accounted ? */
>> modparam("acc", "early_media", 0)
>> modparam("acc", "report_ack", 0)
>> modparam("acc", "report_cancels", 0)
>> /* by default ww do not adjust the direct of the sequential requests.
>> if you enable this parameter, be sure the enable "append_fromtag"
>> in "rr" module */
>> modparam("acc", "detect_direction", 0)
>> /* account triggers (flags) */
>> modparam("acc", "log_flag", FLT_ACC)
>> modparam("acc", "log_missed_flag", FLT_ACCMISSED)
>> modparam("acc", "log_extra",
>> "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
>> modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
>> /* enhanced DB accounting */
>> #!ifdef WITH_ACCDB
>> modparam("acc", "db_flag", FLT_ACC)
>> modparam("acc", "db_missed_flag", FLT_ACCMISSED)
>> modparam("acc", "db_url", DBURL)
>> modparam("acc", "db_extra",
>> "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
>> #!endif
>>
>>
>> # ----- usrloc params -----
>> /* enable DB persistency for location entries */
>> #!ifdef WITH_USRLOCDB
>> modparam("usrloc", "db_url", DBURL)
>> modparam("usrloc", "db_mode", 2)
>> modparam("usrloc", "use_domain", MULTIDOMAIN)
>> #!endif
>>
>>
>> # ----- auth_db params -----
>> #!ifdef WITH_AUTH
>> modparam("auth_db", "db_url", DBURL)
>> modparam("auth_db", "calculate_ha1", yes)
>> modparam("auth_db", "password_column", "password")
>> modparam("auth_db", "load_credentials", "")
>> modparam("auth_db", "use_domain", MULTIDOMAIN)
>>
>> # ----- permissions params -----
>> #!ifdef WITH_IPAUTH
>> modparam("permissions", "db_url", DBURL)
>> modparam("permissions", "db_mode", 1)
>> #!endif
>>
>> #!endif
>>
>>
>> # ----- alias_db params -----
>> #!ifdef WITH_ALIASDB
>> modparam("alias_db", "db_url", DBURL)
>> modparam("alias_db", "use_domain", MULTIDOMAIN)
>> #!endif
>>
>>
>> # ----- domain params -----
>> #!ifdef WITH_MULTIDOMAIN
>> modparam("domain", "db_url", DBURL)
>> # use caching
>> modparam("domain", "db_mode", 1)
>> # register callback to match myself condition with domains list
>> modparam("domain", "register_myself", 1)
>> #!endif
>>
>>
>> #!ifdef WITH_PRESENCE
>> # ----- presence params -----
>> modparam("presence", "db_url", DBURL)
>>
>> # ----- presence_xml params -----
>> modparam("presence_xml", "db_url", DBURL)
>> modparam("presence_xml", "force_active", 1)
>> modparam("presence_xml", "integrated_xcap_server", 1)
>> modparam("rls", "db_url", DBURL)
>> modparam("rls", "xcap_table", "xcap")
>> modparam("rls", "rlsubs_table", "rls_watchers")
>> modparam("rls", "rlpres_table", "rls_presentity")
>> modparam("rls", "clean_period", 100)
>> modparam("rls", "waitn_time", 50)
>> modparam("rls", "max_expires", 10800)
>> modparam("rls", "hash_size", 9)
>> modparam("rls", "xcap_root", "http://ciervo.inf.um.es/xcap-root:5060")
>> modparam("rls", "integrated_xcap_server", 1)
>> modparam("rls", "to_presence_code", 10)
>> modparam("rls", "rls_event", "presence")
>> #!endif
>>
>>
>> #!ifdef WITH_NAT
>> # ----- rtpproxy params -----
>> modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")
>>
>> # ----- nathelper params -----
>> modparam("nathelper", "natping_interval", 30)
>> modparam("nathelper", "ping_nated_only", 1)
>> modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
>> modparam("nathelper", "sipping_from", "sip:pinger at kamailio.org")
>>
>> # params needed for NAT traversal in other modules
>> modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
>> modparam("usrloc", "nat_bflag", FLB_NATB)
>> #!endif
>>
>>
>> #!ifdef WITH_TLS
>> # ----- tls params -----
>> modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg")
>> #!endif
>>
>> #!ifdef WITH_ANTIFLOOD
>> # ----- pike params -----
>> modparam("pike", "sampling_time_unit", 2)
>> modparam("pike", "reqs_density_per_unit", 16)
>> modparam("pike", "remove_latency", 4)
>>
>> # ----- htable params -----
>> # ip ban htable with autoexpire after 5 minutes
>> modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")
>> #!endif
>>
>> #!ifdef WITH_XMLRPC
>> # ----- xmlrpc params -----
>> modparam("xmlrpc", "route", "XMLRPC");
>> modparam("xmlrpc", "url_match", "^/RPC")
>> #!endif
>>
>> #!ifdef WITH_XCAPSRV
>> # ----- xcap_server params -----
>> modparam("xcap_server", "db_url", DBURL)
>> # modparam("rls", "integrated_xcap_server", 1)
>> #!endif
>>
>> ####### Routing Logic ########
>>
>>
>> # Main SIP request routing logic
>> # - processing of any incoming SIP request starts with this route
>> route {
>>
>> # per request initial checks
>> route(REQINIT);
>>
>> # NAT detection
>> route(NAT);
>>
>> # handle requests within SIP dialogs
>> route(WITHINDLG);
>>
>> ### only initial requests (no To tag)
>>
>> # CANCEL processing
>> if (is_method("CANCEL"))
>> {
>> if (t_check_trans())
>> t_relay();
>> exit;
>> }
>>
>> t_check_trans();
>>
>> # authentication
>> route(AUTH);
>>
>> # record routing for dialog forming requests (in case they are routed)
>> # - remove preloaded route headers
>> remove_hf("Route");
>> if (is_method("INVITE|SUBSCRIBE"))
>> record_route();
>>
>> # account only INVITEs
>> if (is_method("INVITE"))
>> {
>> setflag(FLT_ACC); # do accounting
>> }
>>
>> # dispatch requests to foreign domains
>> route(SIPOUT);
>>
>> ### requests for my local domains
>>
>> # handle presence related requests
>> route(PRESENCE);
>>
>> # handle registrations
>> route(REGISTRAR);
>>
>> if ($rU==$null)
>> {
>> # request with no Username in RURI
>> sl_send_reply("484","Address Incomplete");
>> exit;
>> }
>>
>> # dispatch destinations to PSTN
>> route(PSTN);
>>
>> # user location service
>> route(LOCATION);
>>
>> route(RELAY);
>> }
>>
>>
>> route[RELAY] {
>> #!ifdef WITH_NAT
>> if (check_route_param("nat=yes")) {
>> setbflag(FLB_NATB);
>> }
>> if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) {
>> route(RTPPROXY);
>> }
>> #!endif
>>
>> /* example how to enable some additional event routes */
>> if (is_method("INVITE")) {
>> #t_on_branch("BRANCH_ONE");
>> t_on_reply("REPLY_ONE");
>> t_on_failure("FAIL_ONE");
>> }
>>
>> if (!t_relay()) {
>> sl_reply_error();
>> }
>> exit;
>> }
>>
>> # Per SIP request initial checks
>> route[REQINIT] {
>> #!ifdef WITH_ANTIFLOOD
>> # flood dection from same IP and traffic ban for a while
>> # be sure you exclude checking trusted peers, such as pstn gateways
>> # - local host excluded (e.g., loop to self)
>> if(src_ip!=myself)
>> {
>> if($sht(ipban=>$si)!=$null)
>> {
>> # ip is already blocked
>> xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n");
>> exit;
>> }
>> if (!pike_check_req())
>> {
>> xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n");
>> $sht(ipban=>$si) = 1;
>> exit;
>> }
>> }
>> #!endif
>>
>> if (!mf_process_maxfwd_header("10")) {
>> sl_send_reply("483","Too Many Hops");
>> exit;
>> }
>>
>> if(!sanity_check("1511", "7"))
>> {
>> xlog("Malformed SIP message from $si:$sp\n");
>> exit;
>> }
>> }
>>
>> # Handle requests within SIP dialogs
>> route[WITHINDLG] {
>> if (has_totag()) {
>> # sequential request withing a dialog should
>> # take the path determined by record-routing
>> if (loose_route()) {
>> if (is_method("BYE")) {
>> setflag(FLT_ACC); # do accounting ...
>> setflag(FLT_ACCFAILED); # ... even if the transaction fails
>> }
>> route(RELAY);
>> } else {
>> if (is_method("SUBSCRIBE") && uri == myself) {
>> # in-dialog subscribe requests
>> route(PRESENCE);
>> exit;
>> }
>> if ( is_method("ACK") ) {
>> if ( t_check_trans() ) {
>> # no loose-route, but stateful ACK;
>> # must be an ACK after a 487
>> # or e.g. 404 from upstream server
>> t_relay();
>> exit;
>> } else {
>> # ACK without matching transaction ... ignore and discard
>> exit;
>> }
>> }
>> sl_send_reply("404","Not here");
>> }
>> exit;
>> }
>> }
>>
>> # Handle SIP registrations
>> route[REGISTRAR] {
>> if (is_method("REGISTER"))
>> {
>> if(isflagset(FLT_NATS))
>> {
>> setbflag(FLB_NATB);
>> # uncomment next line to do SIP NAT pinging
>> ## setbflag(FLB_NATSIPPING);
>> }
>> if (!save("location"))
>> sl_reply_error();
>>
>> exit;
>> }
>> }
>>
>> # USER location service
>> route[LOCATION] {
>>
>> #!ifdef WITH_ALIASDB
>> # search in DB-based aliases
>> alias_db_lookup("dbaliases");
>> #!endif
>>
>> if (!lookup("location")) {
>> switch ($rc) {
>> case -1:
>> case -3:
>> t_newtran();
>> t_reply("404", "Not Found");
>> exit;
>> case -2:
>> sl_send_reply("405", "Method Not Allowed");
>> exit;
>> }
>> }
>>
>> # when routing via usrloc, log the missed calls also
>> if (is_method("INVITE"))
>> {
>> setflag(FLT_ACCMISSED);
>> }
>> }
>>
>> # Presence server route
>> route[PRESENCE] {
>>
>> if(!is_method("PUBLISH|SUBSCRIBE"))
>> return;
>>
>> #!ifdef WITH_PRESENCE
>>
>> if (!t_newtran())
>> {
>> sl_reply_error();
>> exit;
>> };
>>
>> if(is_method("PUBLISH"))
>> {
>> handle_publish();
>> t_release();
>> }
>> else if( is_method("SUBSCRIBE"))
>> {
>> $var(ret_code)= rls_handle_subscribe();
>>
>> if($var(ret_code)== 10) {
>> handle_subscribe();
>> }
>> t_release();
>>
>> }else if(method=="NOTIFY")
>> {
>> rls_handle_notify();
>> }
>>
>> exit;
>> #!endif
>> # if presence enabled, this part will not be executed
>> if (is_method("PUBLISH") || $rU==$null)
>> {
>> sl_send_reply("404", "Not here");
>> exit;
>> }
>> return;
>> }
>>
>> # Authentication route
>> route[AUTH] {
>> return;
>> #!ifdef WITH_AUTH
>> if (is_method("REGISTER"))
>> {
>> # authenticate the REGISTER requests (uncomment to enable auth)
>> if (!www_authorize("$td", "subscriber"))
>> {
>> www_challenge("$td", "0");
>> exit;
>> }
>>
>> if ($au!=$tU)
>> {
>> sl_send_reply("403","Forbidden auth ID");
>> exit;
>> }
>> } else {
>>
>> #!ifdef WITH_IPAUTH
>> if(allow_source_address())
>> {
>> # source IP allowed
>> return;
>> }
>> #!endif
>> # authenticate if from local subscriber
>> if (from_uri==myself)
>> {
>> if (!proxy_authorize("$fd", "subscriber")) {
>> proxy_challenge("$fd", "0");
>> exit;
>> }
>> if (is_method("PUBLISH"))
>> {
>> if ($au!=$tU) {
>> sl_send_reply("403","Forbidden auth ID");
>> exit;
>> }
>> } else {
>> if ($au!=$fU) {
>> sl_send_reply("403","Forbidden auth ID");
>> exit;
>> }
>> }
>>
>> consume_credentials();
>> # caller authenticated
>> } else {
>> # caller is not local subscriber, then check if it calls
>> # a local destination, otherwise deny, not an open relay here
>> if (!uri==myself)
>> {
>> sl_send_reply("403","Not relaying");
>> exit;
>> }
>> }
>> }
>> #!endif
>> return;
>> }
>>
>> # Caller NAT detection route
>> route[NAT] {
>> #!ifdef WITH_NAT
>> force_rport();
>> if (nat_uac_test("19")) {
>> if (method=="REGISTER") {
>> fix_nated_register();
>> } else {
>> fix_nated_contact();
>> }
>> setflag(FLT_NATS);
>> }
>> #!endif
>> return;
>> }
>>
>> # RTPProxy control
>> route[RTPPROXY] {
>> #!ifdef WITH_NAT
>> if (is_method("BYE")) {
>> unforce_rtp_proxy();
>> } else if (is_method("INVITE")){
>> force_rtp_proxy();
>> }
>> if (!has_totag()) add_rr_param(";nat=yes");
>> #!endif
>> return;
>> }
>>
>> # Routing to foreign domains
>> route[SIPOUT] {
>> if (!uri==myself)
>> {
>> append_hf("P-hint: outbound\r\n");
>> route(RELAY);
>> }
>> }
>>
>> # PSTN GW routing
>> route[PSTN] {
>> #!ifdef WITH_PSTN
>> # check if PSTN GW IP is defined
>> if (strempty($sel(cfg_get.pstn.gw_ip))) {
>> xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n");
>> return;
>> }
>>
>> # route to PSTN dialed numbers starting with '+' or '00'
>> # (international format)
>> # - update the condition to match your dialing rules for PSTN routing
>> if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$"))
>> return;
>>
>> # only local users allowed to call
>> if(from_uri!=myself) {
>> sl_send_reply("403", "Not Allowed");
>> exit;
>> }
>>
>> $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);
>>
>> route(RELAY);
>> exit;
>> #!endif
>>
>> return;
>> }
>>
>> # XMLRPC routing
>> #!ifdef WITH_XMLRPC
>> route[XMLRPC]
>> {
>> # allow XMLRPC from localhost
>> if ((method=="POST" || method=="GET")
>> && (src_ip==127.0.0.1)) {
>> # close connection only for xmlrpclib user agents (there is a bug in
>> # xmlrpclib: it waits for EOF before interpreting the response).
>> if ($hdr(User-Agent) =~ "xmlrpclib")
>> set_reply_close();
>> set_reply_no_connect();
>> dispatch_rpc();
>> exit;
>> }
>> send_reply("403", "Forbidden");
>> exit;
>> }
>> #!endif
>>
>> # Sample branch router
>> branch_route[BRANCH_ONE] {
>> xdbg("new branch at $ru\n");
>> }
>>
>> # Sample onreply route
>> onreply_route[REPLY_ONE] {
>> xdbg("incoming reply\n");
>> #!ifdef WITH_NAT
>> if ((isflagset(FLT_NATS) || isbflagset(FLB_NATB))
>> && status=~"(183)|(2[0-9][0-9])") {
>> force_rtp_proxy();
>> }
>> if (isbflagset("6")) {
>> fix_nated_contact();
>> }
>> #!endif
>> }
>>
>> # Sample failure route
>> failure_route[FAIL_ONE] {
>> #!ifdef WITH_NAT
>> if (is_method("INVITE")
>> && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) {
>> unforce_rtp_proxy();
>> }
>> #!endif
>>
>> if (t_is_canceled()) {
>> exit;
>> }
>>
>> # uncomment the following lines if you want to block client
>> # redirect based on 3xx replies.
>> ##if (t_check_status("3[0-9][0-9]")) {
>> ##t_reply("404","Not found");
>> ## exit;
>> ##}
>>
>> # uncomment the following lines if you want to redirect the failed
>> # calls to a different new destination
>> ##if (t_check_status("486|408")) {
>> ## sethostport("192.168.2.100:5060");
>> ## append_branch();
>> ## # do not set the missed call flag again
>> ## t_relay();
>> ##}
>> }
>>
>> #!ifdef WITH_XCAPSRV
>> # #!define WITH_XHTTPAUTH
>> event_route[xhttp:request] {
>> xdbg("===== xhttp: request [$rv] $rm => $hu\n");
>>
>> #!ifdef WITH_XHTTPAUTH
>> if (!www_authorize("xcap", "subscriber"))
>> {
>> www_challenge("xcap", "0");
>> exit;
>> }
>> #!endif
>> xdbg("===== xhttp: Antes del if de $hu\n");
>> if($hu=~"^/xcap-root/")
>> {
>> xdbg("===== xhttp: Dentro del if de $hu\n");
>> set_reply_close();
>> set_reply_no_connect();
>> # xcap ops
>> $xcapuri(u=>data) = $hu;
>> if($xcapuri(u=>xuid)=~"^sip:.+ at .+")
>> $var(uri) = $xcapuri(u=>xuid);
>> else if($xcapuri(u=>xuid)=~".+ at .+")
>> $var(uri) = "sip:" + $xcapuri(u=>xuid);
>> else
>> $var(uri) = "sip:"+ $xcapuri(u=>xuid) + "@" + $Ri;
>> xlog("===== xhttp: $xcapuri(u=>auid) : $xcapuri(u=>xuid)\n");
>> if($xcapuri(u=>auid)=="xcap-caps")
>> {
>> $var(xbody) =
>> "<?xml version='1.0' encoding='UTF-8'?>
>> <xcap-caps xmlns='urn:ietf:params:xml:ns:xcap-caps'>
>> <auids>
>> <auid>rls-services</auid>
>> <auid>pidf-manipulation</auid>
>> <auid>xcap-caps</auid>
>> <auid>resource-lists</auid>
>> <auid>pres-rules</auid>
>> <auid>org.openmobilealliance.pres-rules</auid>
>> </auids>
>> <extensions>
>> </extensions>
>> <namespaces>
>> <namespace>urn:ietf:params:xml:ns:rls-services</namespace>
>> <namespace>urn:ietf:params:xml:ns:pidf</namespace>
>> <namespace>urn:ietf:params:xml:ns:xcap-caps</namespace>
>> <namespace>urn:ietf:params:xml:ns:resource-lists</namespace>
>> <namespace>urn:ietf:params:xml:ns:pres-rules</namespace>
>> </namespaces>
>> </xcap-caps>";
>> xhttp_reply("200", "ok", "application/xcap-caps+xml",
>> "$var(xbody)");
>> exit;
>> }
>>
>> #!ifdef WITH_XHTTPAUTH
>> # be sure auth user access only its documents
>> if ($au!=$(var(uri){uri.user})) {
>> xhttp_reply("403", "Forbidden", "text/html",
>> "<html><body>$si:$sp</body></html>");
>> exit;
>> }
>>
>> #!endif
>> xdbg("===== xhttp: Antes del switch $rm => $hu\n");
>> switch($rm) {
>> case "PUT":
>> xcaps_put("$var(uri)", "$hu", "$rb");
>> if($xcapuri(u=>auid)=~"pres-rules")
>> {
>> xlog("===== xhttp put: refreshing watchers for $var(uri)\n");
>> pres_update_watchers("$var(uri)", "presence");
>> pres_refresh_watchers("$var(uri)", "presence", 1);
>> }
>> exit;
>> break;
>> case "GET":
>> xlog("===== xhttp: get $var(uri) => $hu\n");
>> xcaps_get("$var(uri)", "$hu");
>> exit;
>> break;
>> case "DELETE":
>> xcaps_del("$var(uri)", "$hu");
>> if($xcapuri(u=>auid)=~"pres-rules")
>> {
>> xlog("===== xhttp del: refreshing watchers for $var(uri)\n");
>> pres_update_watchers("$var(uri)", "presence");
>> pres_refresh_watchers("$var(uri)", "presence", 1);
>> }
>> exit;
>> break;
>> }
>> }
>>
>> # http ops
>> xhttp_reply("200", "ok", "text/html",
>> "<html><body>OK: $si:$sp</body></html>");
>> exit;
>> }
>> #!endif/
>>
>>
>> Regards,
>> Andrés.
>>
>> El 21/12/10 10:22, Klaus Darilion escribió:
>>> Am 16.12.2010 13:36, schrieb "Andrés S. García Ruiz":
>>>>
>>>> B.5) P-CSCF ---- SUBSCRIBE ----> Presentity???
>>>>
>>>> SUBSCRIBE
>>>> sip:testuser01 at 155.54.190.245:8060;rinstance=9b7761b4bcaa4bd0
>>>> SIP/2.0
>>>> Record-Route: <sip:mt at pcscf.open-ims.test:4060;lr>
>>>> Record-Route: <sip:mt at scscf.open-ims.test:6060;lr>
>>>> Via: SIP/2.0/TCP 155.54.210.134:4060;branch=z9hG4bK07df.baa7cf24.0
>>>> Via: SIP/2.0/UDP
>>>> 155.54.210.135:6060;received=155.54.210.135;rport=6060;branch=z9hG4bK07df.8a35e4f3.0
>>>>
>>>>
>>>>
>>>> Via: SIP/2.0/UDP 155.54.210.136;branch=z9hG4bK07df.3688b985.0
>>>> Via: SIP/2.0/UDP 155.54.190.245;branch=z9hG4bK07df.964e0ba7.0
>>>> To: sip:testuser01 at open-ims.test
>>>> From:
>>>> sip:restricted_areas at open-ims.test;tag=533cb9e91f4b999cf76861cbb9ed54ed-32d5
>>>>
>>>>
>>>>
>>>> CSeq: 10 SUBSCRIBE
>>>> Call-ID: 7fd8dfdd-21694 at 127.0.0.1
>>>> Content-Length: 0
>>>> User-Agent: kamailio (3.2.0-dev1 (i386/linux))
>>>> Max-Forwards: 14
>>>> Event: presence
>>>> Contact: <sip:155.54.190.245:5060;transport=udp>
>>>> Expires: 10810
>>>> Max-Forwards: 70
>>>> Support: eventlist
>>>> P-Called-Party-ID: <sip:testuser01 at open-ims.test>
>>>>
>>>>
>>>> The step B.5 is sent directly to the presentity testuser01. Instead of
>>>> that, I thought that message was suppose to be sent to the presence
>>>> server in the URI that is shown in Contact header.
>>>
>>>
>>> If the P-CSCF is not forwarding the request as supposed, I guess you
>>> have to fix the routing on the P-CSCF.
>>>
>>> klaus
>>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
Kamailio (OpenSER) Advanced Training
Jan 24-26, 2011, Irvine, CA, USA
http://www.asipto.com
More information about the sr-users
mailing list