[SR-Users] Recursive failure_route after CFNA

[Igor Potjevlesch]

Hello Marius,

Yes, I armed the failure_route with 't_on_failure("1")' when I setup the
CFNA...but the outgoing call generated by the CFNA doesn't go to the
failure_route.
If I deactivate the flag which triggered the voicemail, I have a loop and
the phone rings again after the timer.

Igor.

2010/12/21 marius zbihlei <marius.zbihlei at 1and1.ro>

>  On 12/21/2010 03:22 PM, Igor Potjevlesch wrote:
>
> Hello all,
>
>
>
> I have setup a mechanism  to forward outgoing calls to another gateway if
> the first one replies with 5xx. I have simply used ‘t_check_status’ in the
> failure_route. This works.
>
>
>
> But, with a CFNA it doesn’t work : the incoming call is treated by SER
> (0.9.9). After the timer has expired the call goes to ‘failure_route’ for
> the first time to setup the CFNA with, finally, an ‘append_branch’. At this
> moment, the first gateway replies with 5xx and the call never goes to
> ‘failure_route’. I can match the 5xx within the ‘onreply_route’, but that’s
> all. So, instead of trying another gateway, the initial incoming calls
> terminate on the voicemail.
>
>
>
> Can anyone help me?
>
>
>  Hello,
>
> Have you loaded the/another failure route for the second time in the CFNA
> failure route handler?
>
> Marius
>
> Regards,
>
>
>
> Igor.
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20101221/8d473215/attachment-0001.htm>