[SR-Users] Users are not registering on my Kamailio

[Daniel-Constantin Mierla]

  Hello,

run Kamailio with higher debug value (debug=4) and watch the syslog, you 
should get some hints about authentication failure - can be wrong 
password, invalid nonce, etc

Also, you should consider using 3.0 directly if you just start the 
configuration. It has lot of improvements and next major release 3.1 is 
approaching, upgrade from 3.0 is far easier than from 1.5.

Cheers,
Daniel


On 8/18/10 12:37 AM, Toyima Dias wrote:
> HEllo community,
>
> I'm having some problems with my kamailio configuration, following is 
> the section of my authentication process on my /etc/kamailio/kamailio.cfg
>
> route [3] {
>           if (is_method("REGISTER")) {
>                   if (!www_authorize("", "subscriber")) {
>                        www_challenge("", "0");
>                        exit;
>                   }
>
>                      if ($au!=$tU) {
>                         sl_send_reply("403", "Forbidden auth ID");
>                             exit;
>                   }
>                } else {
>                         if (from_uri==myself) {
>                             if(!proxy_authorize("", "subscriber")) {
>                                          proxy_challenge("", "0");
>                                          exit;
>                         }
>
>                          if (is_method("PUBLISH"))  {
>                                  if ($au!=$tU) {
>                                       sl_send_reply("403", "Forbidden 
> auth ID");
>                                       exit;
>                               }
>                            } else {
>                              if ($au!=$fU) {
>                                sl_send_reply("403", "Forbidden auth ID");
>                                exit;
>                           }
>                      }
>                      consume_credentials();
>            }
>          }
>          return;
> }
>
>
> I added a user with the following command:
>
> # kamctl add 1102 123456
>
> And then i checked on mysql, table subscriber:
>
> mysql> select * from subscriber;
> +----+----------+---------------+----------+---------------+----------------------------------+----------------------------------+------+
> | id | username | domain        | password | email_address | ha1       
>                        | ha1b                             | rpid |
> +----+----------+---------------+----------+---------------+----------------------------------+----------------------------------+------+
> |  3 | 1102     | dannydias.com <http://dannydias.com> |          |   
>             | fe7a80817383cfd90950dea03d37eccf | 
> dbb9b6ef93d4f3417038a6bf5cd176db | NULL |
> +----+----------+---------------+----------+---------------+----------------------------------+----------------------------------+------+
> 1 row in set (0.00 sec)
>
> By the way, the domain field does not exist (dannydias.com 
> <http://dannydias.com>) i'm not sure how this could affect the 
> authentication process, this migh be the problem?
>
> And finally, ngrep-sip to check what is going on:
>
> #
> U 2010/08/17 22:28:38.548357 80.26.81.96:26932 
> <http://80.26.81.96:26932> -> 212.230.19.191:5060 
> <http://212.230.19.191:5060>
> *_REGISTER sip:212.230.19.191 SIP/2.0'_*
> Via: SIP/2.0/UDP 80.26.81.96:26932;branch=z9hG4bK-d2ee4e38'
> From: "1102" <sip:1102 at 212.230.19.191 
> <mailto:sip%3A1102 at 212.230.19.191>>;tag=36dcc698cfc16210o1'
> To: "1102" <sip:1102 at 212.230.19.191 <mailto:sip%3A1102 at 212.230.19.191>>'
> Call-ID: 4aab2f50-775b4d34 at 80.26.81.96 
> <mailto:4aab2f50-775b4d34 at 80.26.81.96>'
> CSeq: 10409 REGISTER'
> Max-Forwards: 70'
> Authorization: Digest 
> username="1102",realm="212.230.19.191",nonce="4c6b0d34000000c9c4e2068de2d41bec38c6d23029696501",uri="sip:212.230.19.191",algorithm=MD5,response="a09ea335a01051d714d2cbfe95e17820"'
> Contact: "1102" <sip:1102 at 80.26.81.96:26932 
> <http://sip:1102@80.26.81.96:26932>>;expires=180'
> User-Agent: Linksys/SPA942-5.1.15(a)'
> Content-Length: 0'
> Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER'
> Supported: replaces'
> '
>
> #
> U 2010/08/17 22:28:38.548357 212.230.19.191:5060 
> <http://212.230.19.191:5060> -> 80.26.81.96:26932 
> <http://80.26.81.96:26932>
> *_SIP/2.0 401 Unauthorized'_*
> Via: SIP/2.0/UDP 80.26.81.96:26932;branch=z9hG4bK-d2ee4e38'
> From: "1102" <sip:1102 at 212.230.19.191 
> <mailto:sip%3A1102 at 212.230.19.191>>;tag=36dcc698cfc16210o1'
> To: "1102" <sip:1102 at 212.230.19.191 
> <mailto:sip%3A1102 at 212.230.19.191>>;tag=00f209f5fddbfe1aa952cd699e41d531.97e5'
> Call-ID: 4aab2f50-775b4d34 at 80.26.81.96 
> <mailto:4aab2f50-775b4d34 at 80.26.81.96>'
> CSeq: 10409 REGISTER'
> WWW-Authenticate: Digest realm="212.230.19.191", 
> nonce="4c6b0d34000000caa164dcad25dbc5b4c6baefcef6dc84ae"'
> Server: Kamailio (1.5.4-notls (x86_64/linux))'
> Content-Length: 0'
> '
>
> Could somebody help me? i can't find the real problem
>
> Thanks in advance
>
> DD
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla
http://www.asipto.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20100818/50de2e24/attachment.htm>