[SR-Users] Calling number Routing possibility in 1.5rel.

[Maciej Bylica]

Daniel,

Thx for pointing me to Your docs covering stability and upgrade remarks.
So You've convinced me to upgrade to 3.0 rel. :)

But, first I need to configure calling number routing ASAP.
Then i will be having more time to do the upgrade.

Anyway thx for clearing this up.
Maciej


2010/4/13 Daniel-Constantin Mierla <miconda at gmail.com>:
> Hello,
>
> On 4/13/10 10:40 AM, Maciej Bylica wrote:
>>
>> Hi Daniel,
>>
>> The main reason is that i have running configuration exactly on 1.5
>> I am not sure if i can easly copy&paste all stuff from 1.5 (especially
>> modules configuration)
>>
>
> modules configuration is mostly the same for majority of modules, just TM
> has changed substantially. Here is a page collecting hints about migration:
> http://www.kamailio.org/dokuwiki/doku.php/install:1.5.x-to-3.0.0
>
>> The last question is about stability of 3.0.
>>
>
> 3.0 proved very stable so far, it was lot tested, i wrote about it at:
> http://www.kamailio.org/w/2010/03/remarks-about-v3-0-x-strong-stability/
>
> I thought you start now, which would have been odd to begin with an older
> version, but if you improve an existing system, then I understand.
>
> Cheers,
> Daniel
>
>> Thx,
>> Maciej.
>>
>> 2010/4/13 Daniel-Constantin Mierla<miconda at gmail.com>:
>>
>>>
>>> On 4/12/10 8:58 PM, Maciej Bylica wrote:
>>>
>>>>
>>>> Hi Daniel,
>>>>
>>>> Thx for reply. I am about to run through these modules.
>>>>
>>>>
>>>
>>> btw, you said you are playing with 1.5, any particular reason? 3.0 has a
>>> lot
>>> better core architecture and new features.
>>>
>>> Cheers,
>>> Daniel
>>>
>>>
>>>>
>>>> Cheers,
>>>> Maciej.
>>>>
>>>>
>>>>
>>>>
>>>>>
>>>>> Hello,
>>>>>
>>>>> there are couple of other modules that you can use for dialed number
>>>>> routing
>>>>> - lcr - least cost routing
>>>>> - pdt
>>>>> - dialplan
>>>>>
>>>>> Depending on you needs, one can fit better, or sometimes you can use
>>>>> combined approach, with other modules such as dispatcher.
>>>>>
>>>>> Cheers,
>>>>> Daniel
>>>>>
>>>>> On 4/12/10 5:23 PM, Maciej Bylica wrote:
>>>>>
>>>>>
>>>>>>
>>>>>> I guess i can use SQLOps module plus already configured carrierroute
>>>>>> to achieve my goal:
>>>>>> - call routing based on calling number prefix
>>>>>> - load balancing
>>>>>> - failure routing
>>>>>>
>>>>>> Maciej.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>
>>>>>>> Dear ALL,
>>>>>>>
>>>>>>> I am playing around with kamailio 1.5.
>>>>>>> Could somebody explain me what module best fit to route the call on
>>>>>>> the basis of number A (calling number).
>>>>>>> What is more all rules should be able to be modified directly from
>>>>>>> mysql
>>>>>>> db.
>>>>>>> I've run through 3.0 modules and figured out that there is drouting
>>>>>>> module which is really great, but is it present in 1.5 rel?
>>>>>>>
>>>>>>> If negative, what other modules can be used.
>>>>>>>
>>>>>>> Thx in advance,
>>>>>>> Maciej.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>>>>>> list
>>>>>> sr-users at lists.sip-router.org
>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> Daniel-Constantin Mierla * http://www.asipto.com/ *
>>>>> http://twitter.com/miconda *
>>>>> http://www.linkedin.com/in/danielconstantinmierla
>>>>>
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>> sr-users at lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>>
>>>
>>> --
>>> Daniel-Constantin Mierla * http://www.asipto.com/ *
>>> http://twitter.com/miconda *
>>> http://www.linkedin.com/in/danielconstantinmierla
>>>
>>>
>
> --
> Daniel-Constantin Mierla * http://www.asipto.com/ *
> http://twitter.com/miconda *
> http://www.linkedin.com/in/danielconstantinmierla
>