[Kamailio-Users] Understanding memory-leaks by inspecting PKG/SHM memory status at shutdown

[Daniel-Constantin Mierla]

On 4/8/10 1:21 PM, Iñaki Baz Castillo wrote:
> 2010/4/8 Iñaki Baz Castillo<ibc at aliax.net>:
>    
>> 2010/4/8 Daniel-Constantin Mierla<miconda at gmail.com>:
>>      
>>> it does not look as a dump with memory debugging on.
>>>        
>> SOrry, I just applied "MEMDBG=1" in one of the servers and got the
>> output in the other.
>>
>>
>>      
>>> When memdbg is on, you should get something like:
>>>
>>>     0(17665)       1. N  address=0xb5ab2440 frag=0xb5ab2428 size=4 used=1
>>>     0(17665)             alloc'd from timer.c: init_timer(52)
>>>
>>> Notice the "alloc'd ...' line which specifies the place where the memory was
>>> allocated.
>>>
>>> A leak is signaled by many occurrences of allocation from same place
>>> (skipping the part of allocation done for config parsing and module
>>> initialization which happen only one, at startup).
>>>        
>
> Hi again. I already have a kamailio 1.5.4 compiled with mem debugging
> (as "kamailio -V" shows DBG_QM_MALLOC flag).
>
> In config file I have:
>
>    debug=3
>    memlog=3 # Same behaviour with 1 or 2 as it equal or less than 'debug'.
>
>
> Unfortunatelly the ammount of logs it generates makes it unusable for
> production environment (~ 10 calls per second). Just restarting
> kamailio when memlog is enabled takes really long time (unfortuantelly
> I must restart it when adding new entries to 'address' table due to
> the issue when performing "fifo address_reload" which completely
> freezes kamailio sometimes).
>
> Do I miss something? is it possible to log allocated and freeded
> memory without generating so many logs?
>    

the goal is to see the places where the memory was allocated. That will 
give the proper hints about the leak.

What you can do is to print pkg status only when you send SIGUSR1 -- I 
attached a patch for that.

In this way, a restart does not print pkg and shm status, so it is fast. 
At runtime, when you send SIGUSR1 to a pid, the others can work just 
fine, so processing should not be affected that much. Use kamctl ps to 
spot the pid of an udp worker.

Cheers,
Daniel

>
> If not, I could use "memlog=1" without memory debugging compiled and I
> would check periodically the ammounf of PKG memory used. This is, I
> get this output:
>
>    kamailio[11770]: Memory status (pkg):
>    kamailio[11770]: fm_status (0x701a40):
>    kamailio[11770]:  heap size= 16777216
>    kamailio[11770]:  used= 190936, used+overhead=250696, free=16526520
>    kamailio[11770]:  max used (+overhead)= 258464
>
> I can check it periodically and inspect if the used memory is
> increasing. If so there must be a memleak. Am I right?
>
>
> Thanks.
>
>    

-- 
Daniel-Constantin Mierla * http://www.asipto.com/ * 
http://twitter.com/miconda * 
http://www.linkedin.com/in/danielconstantinmierla
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: pkg-status-only.diff
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20100408/c7c308e0/attachment.txt>