[Kamailio-Users] content about kamailio start error
zhangchao00001
zhangchao0000198 at 163.com
Sun Sep 27 03:08:09 CEST 2009
Dear sir:
I get the error during during processing of SIP message. The config file i used is below (the config works well on other kamailio server). By the way , the email system i used dosen't support:all the time please keep CC-ing to mailing list address
ormaybe iadd the mailing list address in a wrong place, mails with a cc-ing added will be posted back.
is it CC:users at lists.kamailio.org?
debug=3
fork=yes
log_stderror=yes
port=5060
####### Modules Section ########
mpath="/usr/local/lib/kamailio/modules/"
loadmodule "db_mysql.so"
loadmodule "mi_fifo.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "uri_db.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "acc.so"
loadmodule "path.so"
loadmodule "auth.so"
loadmodule "auth_db.so"
loadmodule "domain.so"
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "nathelper.so"
# ----------------- setting module-specific parameters ---------------
modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")
modparam("rr", "enable_full_lr", 1)
modparam("rr", "append_fromtag", 0)
modparam("registrar", "method_filtering", 1)
modparam("registrar", "append_branches", 0)
modparam("registrar", "max_contacts", 10)
modparam("uri_db", "use_uri_table", 0)
modparam("uri_db", "db_url", "")
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
modparam("acc", "detect_direction", 0)
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)
modparam("domain", "db_url", "mysql://root:123456@localhost/SIP")
modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url", "mysql://root:123456@localhost/SIP")
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url", "mysql://root:123456@localhost/SIP")
modparam("auth_db", "load_credentials", "")
modparam("domain", "db_url", "mysql://root:123456@localhost/SIP")
modparam("domain", "db_mode", 1)
modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1)
modparam("presence|presence_xml", "db_url", "mysql://root:123456@localhost/SIP")
modparam("presence_xml", "force_active", 1)
modparam("presence", "server_address", "sip:26.28.29.253:5060")
modparam("nathelper", "rtpproxy_sock", "udp:26.28.249.253:7722")
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "rtpproxy_tout", 10)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", 7)
modparam("nathelper", "sipping_from", "sip:pinger at kamailio.org")
modparam("registrar|nathelper", "received_avp", "$avp(i:80)")
modparam("usrloc", "nat_bflag", 6)
modparam("path", "use_received", 1)
####### Routing Logic ########
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
if(msg:len>=2048)
{
sl_send_reply("513","Message too big");
exit;
}
route(4);
if (has_totag()) {
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
}
route(1);
} else {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(2);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ... ignore and discard.\n");
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
if(!uri==myself)
{
append_hf("P-hint: outbound\r\n");
if(is_method("REGISTER|MESSAGE"))
{
if(is_method("REGISTER"))
{
if(!add_path_received())
{
sl_send_reply("503","Internal Path Error!");
exit();
}
}
}
else
{
record_route();
}
route(1);
}
# authentication
route(3);
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
setflag(1); # do accounting
}
if( is_method("PUBLISH|SUBSCRIBE"))
route(2);
if (is_method("REGISTER"))
{
if (!save("location"))
sl_reply_error();
exit;
}
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
if (!lookup("location")) {
switch ($retcode) {
case -1:
case -3:
t_newtran();
t_reply("404", "Not Found");
exit;
case -2:
sl_send_reply("405", "Method Not Allowed");
exit;
}
}
# when routing via usrloc, log the missed calls also
setflag(2);
route(1);
}
route[1] {
if (check_route_param("nat=yes")) {
setbflag(6);
}
if (isflagset(5) || isbflagset(6)) {
route(5);
}
/* example how to enable some additional event routes */
if (is_method("INVITE"))
{
#t_on_branch("1");
t_on_reply("1");
t_on_failure("1");
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
# Presence route
/* uncomment the whole following route for enabling presence server */
route[2]
{
if (!t_newtran())
{
sl_reply_error();
exit;
};
if(is_method("PUBLISH"))
{
handle_publish();
t_release();
}
else
if( is_method("SUBSCRIBE"))
{
handle_subscribe();
t_release();
}
exit;
# if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU==null)
{
sl_send_reply("404", "Not here");
exit;
}
return;
}
# Authentication route
/* uncomment the whole following route for enabling authentication */
route[3] {
if (is_method("REGISTER"))
{
# authenticate the REGISTER requests (uncomment to enable auth)
/*if (!www_authorize("", "subscriber"))
{
www_challenge("", "0");
exit;
}
if ($au!=$tU)
{
sl_send_reply("403","Forbidden auth ID");
exit;
}*/
} else {
# authenticate if from local subscriber (uncomment to enable auth)
/*if (from_uri==myself)
{
if (!proxy_authorize("", "subscriber")) {
proxy_challenge("", "0");
exit;
}
if (is_method("PUBLISH"))
{
if ($au!=$tU) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
} else {
if ($au!=$fU) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
}
consume_credentials();
# caller authenticated
}*/
}
return;
}
# Caller NAT detection route
/* uncomment the whole following route for enabling Caller NAT Detection */
route[4]{
force_rport();
if (nat_uac_test("19")) {
if (method=="REGISTER") {
fix_nated_register();
} else {
fix_nated_contact();
}
setflag(5);
}
return;
}
# RTPProxy control
/* uncomment the whole following route for enabling RTPProxy Control */
route[5] {
if (is_method("BYE")) {
unforce_rtp_proxy();
} else if (is_method("INVITE")){
force_rtp_proxy();
}
if (!has_totag()) add_rr_param(";nat=yes");
return;
}
branch_route[1] {
xdbg("new branch at $ru\n");
}
onreply_route[1] {
xdbg("incoming reply\n");
if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])") {
force_rtp_proxy();
}
if (isbflagset(6)) {
fix_nated_contact();
}
}
failure_route[1] {
if (is_method("INVITE") && (isbflagset(6) || isflagset(5)))
{
unforce_rtp_proxy();
}
if (t_was_cancelled())
{
exit;
}
if (t_check_status("486|408")) {
sethostport("26.28.249.125:5060");
append_branch();
# do not set the missed call flag again
t_relay();
}
}
在2009-09-25，"Daniel-Constantin Mierla" <miconda at gmail.com> 写道：
>Hello,
>
>do keep mailing list CC-ed for every mail, otherwise I will stop replying.
>
>On 25.09.2009 3:33 Uhr, zhangchao00001 wrote:
>> Dear sir:
>> thank you for your reply.
>> The Kamailio -V result :
>> version: kamailio 1.5.2-notls (i386/linux)
>> flags: STATISTICS, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
>> SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
>> ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
>> MAX_URI_SIZE 1024, BUF_SIZE 65535, PKG_SIZE 4194304
>> poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
>> svnrevision: unknown
>> @(#) $Id: main.c 5608 2009-02-13 16:48:17Z henningw $
>> main.c compiled on 10:23:04 Sep 23 2009 with gcc 4.3.0
>> when there's no user, it reports no error, when a UAC register, it
>> reports the error below:
>> Sep 25 09:24:21 [3323] ERROR:core:build_req_buf_from_sip_req: out of
>> pkg memory
>> Sep 25 09:24:21 [3323] ERROR:tm:print_uac_request: no more shm_mem
>> Sep 25 09:24:21 [3323] ERROR:tm:t_forward_nonack: failure to add branches
>> Sep 25 09:24:21 [3323] ERROR:tm:_reply_light: failed to allocate shmem
>> buffer
>> Sep 25 09:24:21 [3323] ERROR:tm:relay_reply: no more share memory
>> what should i do to fix it?
>does it happen after startup, during processing of SIP message? Is a
>stress test? What is the list of loaded modules? If you can share the
>config, would be good.
>
>Daniel
>
>--
>Daniel-Constantin Mierla
>* Kamailio SIP Masterclass, Nov 9-13, 2009, Berlin
>* http://www.asipto.com/index.php/sip-router-masterclass/
>
网易邮箱用户购物独享现金返还
网易邮箱用户购物独享现金返还
网易邮箱用户购物独享现金返还
"中国制造",讲述中国60年往事
"中国制造",讲述中国60年往事
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20090927/1e6f982a/attachment.htm>
More information about the sr-users
mailing list