[Serusers] SER with RADIUS

[Leon Li]

Hi,

 

I am trying to make SER working with FreeRADIUS. However, I got an error
using www_challenge, " 0(3184) parse error (119,25-26): unknown command,
missing loadmodule?" The 119 line is www_challenge("", "0"); I did load
auth module. Any idea?

 

Here is my config:

 

#

# $Id: ser-basic.cfg,v 1.1.2.2 2008/06/12 13:15:06 alfredh Exp $ # #
This a very basic config file w aliases and anamed route but # w/o
authentication, accounting, database, multi-domain support etc.

# Please refer to ser.cfg for a more complete example #

 

# ----------- global configuration parameters ------------------------

 

debug=3         # debug level (cmd line: -dddddddddd)

#memdbg=10 # memory debug message level

#memlog=10 # memory statistics log level #log_facility=LOG_LOCAL0 # sets
the facility used for logging (see syslog(3))

 

/* Uncomment these lines to enter debugging mode fork=no
log_stderror=yes */

 

check_via=no    # (cmd. line: -v)

dns=no          # (cmd. line: -r)

rev_dns=no      # (cmd. line: -R)

listen=202.158.197.134

port=5060

children=4

#user=ser

#group=ser

#disable_core=yes #disables core dumping

#open_fd_limit=1024 # sets the open file descriptors limit #mhomed=yes
# usefull for multihomed hosts, small performance penalty
#disable_tcp=yes #tcp_accept_aliases=yes # accepts the tcp alias via
option (see NEWS)

 

#

 

# ------------------ module loading ----------------------------------

 

loadmodule "/usr/local/lib/ser/modules/sl.so"

loadmodule "/usr/local/lib/ser/modules/tm.so"

loadmodule "/usr/local/lib/ser/modules/rr.so"

loadmodule "/usr/local/lib/ser/modules/textops.so"

loadmodule "/usr/local/lib/ser/modules/maxfwd.so"

loadmodule "/usr/local/lib/ser/modules/usrloc.so"

loadmodule "/usr/local/lib/ser/modules/registrar.so"

loadmodule "/usr/local/lib/ser/modules/ctl.so"

loadmodule "/usr/local/lib/ser/modules/auth.so"

loadmodule "/usr/local/lib/ser/modules/auth_radius.so"

 

# ----------------- setting module-specific parameters ---------------

 

# -- usrloc params --

 

modparam("usrloc", "db_mode",   0)

 

# -- rr params --

# add value to ;lr param to make some broken UAs happy modparam("rr",
"enable_full_lr", 1)

 

# ctl params

# by default ctl listens on unixs:/tmp/ser_ctl if no other address is #
specified in modparams; this is also the default for sercmd
modparam("ctl", "binrpc", "unixs:/tmp/ser_ctl") # listen on the
"standard" fifo for backward compatibility modparam("ctl", "fifo",
"fifo:/tmp/ser_fifo") # listen on tcp, localhost #modparam("ctl",
"binrpc", "tcp:localhost:2046")

 

# -- auth_radius params --

modparam("auth_radius", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf")

 

# -------------------------  request routing logic -------------------

 

# main routing logic

 

route{

 

      # initial sanity checks -- messages with

      # max_forwards==0, or excessively long requests

      if (!mf_process_maxfwd_header("10")) {

            sl_reply("483","Too Many Hops");

            break;

      }

      if (msg:len >=  max_len ) {

            sl_reply("513", "Message too big");

            break;

      }

 

      # we record-route all messages -- to make sure that

      # subsequent messages will go through our proxy; that's

      # particularly good if upstream and downstream entities

      # use different transport protocol

      if (!method=="REGISTER") record_route();

 

      # subsequent messages withing a dialog should take the

      # path determined by record-routing

      if (loose_route()) {

            # mark routing logic in request

            append_hf("P-hint: rr-enforced\r\n");

            route(FORWARD);

            break;

      }

 

      if (!uri==myself) {

            # mark routing logic in request

            append_hf("P-hint: outbound\r\n");

            route(FORWARD);

            break;

      }

 

      # if the request is for other domain use UsrLoc

      # (in case, it does not work, use the following command

      # with proper names and addresses in it)

      if (uri==myself) {

 

            if (method=="REGISTER") {

                  # authentication

                  if (!radius_www_authorize("")) {

                        www_challenge("", "0");

                        break;

                  };

                  save_contacts("location");

                  break;

            }

 

            # native SIP destinations are handled using our USRLOC DB

            if (!lookup_contacts("location")) {

                  sl_reply("404", "Not Found");

                  break;

            }

            append_hf("P-hint: usrloc applied\r\n");

      }

      route(FORWARD);

}

 

route[FORWARD]

{

      # send it out now; use stateful forwarding as it works reliably

      # even for UDP2TCP

      if (!t_relay()) {

            sl_reply_error();

      }

}

 

Thanks,

Leon

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20090506/cc8e5089/attachment.htm>