[Kamailio-Users] NAThelper and multipart SDP

Pascal Maugeri pascal.maugeri at gmail.com
Mon Jun 22 13:46:55 CEST 2009


If I understood correctly you want me to test the patch nhelpr_func.c you've
done in sr in kamailio ?
This is what I've done and at least it compiles :-)

(I also tried to compile sr, but I need to sudy it a bit more as I've never
installed sr so far)

Nevertheless, the ouput payload is wrong:

Content-Type: application/sdp

v=0
o=- 3454665275 3454665275 IN IP4 10.1.1.248
s=pjmedia
c=IN IP4 88.29.163.14288.29.163.142
t=0 0
a=X-nat:0
m=audio 5191251912 RTP/AVP 115
[...]
m=application 4198041980 udp TBCP

The RTP and RTCP ports are wrong: 5191251912 and 4198041980  ?!

Where could I have a look in nathelper source to see what is wrong ?

-pascal





On Mon, Jun 22, 2009 at 11:36 AM, Daniel-Constantin Mierla <
miconda at gmail.com> wrote:

> Hello Pascal,
>
> I have just committed support for multipart bodies in sip router, if works
> then I will backport to 1.5.
>
>
> http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=1f41271e1c1b879217835b8b3fdbdc2680138f25
>
>
> Can you test it? Unfortunately I cannot do it these days properly due to
> traveling. Patch should work pretty straightforward with 1.5 though, if you
> want to test it directly there.
>
> Cheers,
> Daniel
>
> On 06/22/2009 11:30 AM, Pascal Maugeri wrote:
>
>> I tried to install mediaproxy but it looks tricky to install (many
>> dependencies, including kernel specific configurations) :-(
>> and I would like to stick to rtpproxy for performance reason.
>>
>> Do you believe the same workaround using textops/filter_body can be used
>> using rtpproxy ? I think yes as these are two different things as said Juha.
>>
>> Regards,
>> Pascal
>>
>>
>> On Fri, Jun 19, 2009 at 9:26 PM, Pascal Maugeri <pascal.maugeri at gmail.com<mailto:
>> pascal.maugeri at gmail.com>> wrote:
>>
>>
>>
>>    On Fri, Jun 19, 2009 at 9:13 PM, Juha Heinanen <jh at tutpro.com
>>    <mailto:jh at tutpro.com>> wrote:
>>
>>        Pascal Maugeri writes:
>>
>>         > So if I understand well (please correct me if I'm wrong)
>>        the "plan" is:
>>         >
>>         > 1º) I install MediaProxy and use Kamailio MEDIAPROXY module
>>        instead of
>>         > rtpproxy/NATHelper
>>         >
>>         > 2º) filter the app/sdp part with
>>         >
>>         > if (has_body("multipart/mixed")) {
>>         >     if (filter_body("application/sdp") {
>>         >         remove_hf("Content-Type");
>>         >
>>         >         append_hf("Content-Type: application/sdp\r\n");
>>         >     } else {
>>         >
>>         >         xlog("Body part application/sdp not found\n");
>>         >     }
>>         > }
>>
>>        you don't need to call filter_body if you use mediaproxy.
>>
>>         > 3º) then engage the media proxy with
>>         >
>>         > if (method==INVITE && !has_totag()) {
>>         >
>>         >     # We can also use a specific media relay if we need to
>>         >     #$avp(s:media_relay) = "1.2.3.4";
>>         >     engage_media_proxy();
>>         > }
>>
>>        i have never used engage_media_proxy() functions, because it
>>        makes some
>>        assumptions that are not generally true.  i use
>>        use_media_proxy() instead.
>>
>>         > 4º) finally put the body part(s) that have been removed in
>>        1º) and relay the
>>         > INVITE to my next hop.
>>         >      I believe I can save the body part(s) in 1º) and put
>>        them back using
>>         > set_body(txt, content_type).
>>
>>        you don't need to do anything like that if you use
>>        use_media_proxy()
>>        function, because it does not remove anything.
>>
>>
>>    Thanks Juha ! I can't wait for monday to test it :-)
>>
>>    Have a nice week-end
>>    Pascal
>>
>>
>>
>>        -- juha
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Kamailio (OpenSER) - Users mailing list
>> Users at lists.kamailio.org
>> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>>
>
> --
> Daniel-Constantin Mierla
> http://www.asipto.com/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20090622/40f34e02/attachment.htm>


More information about the sr-users mailing list