[Kamailio-Users] LCR in Kamailio 1.4

[Daniel-Constantin Mierla]

Hello,

On 02/19/2009 05:34 PM, Asim Riaz wrote:
> Hello,
> I am using LCR, for some reason load_gws() function is not finding the 
> gateway in DB, it was working in the start then added some more routes 
> and after that everything stopped working, I am not sure where to 
> start troubleshooting,  any idea ?

run kamailio with higher debug mode (e.g., debug=5) in configuration file.

You should get more debug messages in the syslog, that may give you some 
hints. look for lines containing 'lcr'.

Cheers,
Daniel

>
> kamctl lcr show
>
> lcr routes
> +----+--------+----------+--------+----------+
> | id | prefix | from_uri | grp_id | priority |
> +----+--------+----------+--------+----------+
> |  9 | 0      |          |      1 |        1 |
> +----+--------+----------+--------+----------+
> lcr gateways
> +------------+---------------+------+------------+-----------+--------+-------+------+-------+
> | gw_name    | ip_addr       | port | uri_scheme | transport | grp_id 
> | strip | tag  | flags |
> +------------+---------------+------+------------+-----------+--------+-------+------+-------+
> | XXXX           | XXXX | 5060 |          1 |         1 |      1 |     
> 0 |      |     0 |
> +------------+---------------+------+------------+-----------+--------+-------+------+-------+
>
>
>
> my routing script
>
>  
>         if(!load_gws()) {
>          xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway ");
>                 sl_send_reply("503", "unable to find gateway");
>                 exit;
>         }
> Thanks in advance.
>
> Asim
> ------------------------------------------------------------------------
>
> _______________________________________________
> Kamailio (OpenSER) - Users mailing list
> Users at lists.kamailio.org
> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

-- 
Daniel-Constantin Mierla
http://www.asipto.com